References
- Cho SR, Choi BW, Song IC. 1998. Post-ultimate behaviour of stiffened panels subjected to axial compression. In: Shanmugam NE, editor. Proceedings of the 2nd International Conference on Thin-Walled Structures; . Dec 2–4; Singapore. p. 433–440.
- Choung J, Jeon SI, Lee MS, Nam JM, Ha TB. 2011. Average compressive strengths of stiffened plates for in-service vessels under lateral pressure. J Soc Nav Archit Korea. 48:330–335.
- DNV (Det Norske Veritas). 2009. Rules for classification of ships. Part 3. Chapter 1. Oslo (Norway): DNV.
- Gordo JM, Guedes SC, Faulkner D. 1996. Approximate assessment of the ultimate longitudinal strength of the hull girder. J Ship Res. 40:60–69.
- IACS (International Association of Classification Societies). 2010a. Common structural rules for bulk carriers; . [Online; Updated July 2010]. Available from: http://www.iacs-data.org.uk/
- IACS. 2010b. Common structural rules for double hull oil tankers; . [Online; Updated July 2010]. Available from: http://www.iacs-data.org.uk/
- Khan I, Zhang S. 2011. Effects of welding-induced residual stress on ultimate strength of plates and stiffened panels. Ships Offshore Struct. 6:297309
- Kim UN, Choe IH, Paik JK. 2009. Buckling and ultimate strength of perforated plate panels subject to axial compression: experimental and numerical investigations with design formulations. Ships Offshore Struct. 4:337–361.
- Lee JS. 1989. Reliability analysis of continuous structural system . [doctoral dissertation]. [Glasgow (Scotland)]: University of Glasgow.
- Lin YT. 1985. Ship longitudinal strength . [doctoral dissertation]. [Glasgow (Scotland)]: University of Glasgow.
- Nam JM, Choung J, Jeon SI, Lee MS, Ha TB. 2010. Slenderness ratio distributions and average compressive strengths of stiffened plates used for in-service vessels. J Soc Nav Archit Korea. 47:709–718.
- Paik JK, Kim BJ. 2002. Ultimate strength formulations for stiffened panels under combined axial load, in-plane bending and lateral pressure: a benchmark study. Thin Walled Struct. 40:45–83.
- Paik JK, Thayamballi AK. 2003. Ultimate limit state design of steel-plated structures. Chichester (UK): Wiley.
- Pretheesh PC, Das PK, Crow A, Hunt S. 2010. Effect of distortion on the buckling strength of stiffened panels. Ships Offshore Struct. 5:141–153.
- Simulia. 2008. Abaqus analysis user manual. Providence (RI): Dassault Systèmes Simulia Corp.
- Smith CS, Davidson PC, Chapman JC, Dowling PJ. 1988. Strength and stiffness of ships’ plating under in-plane compression and tension. RINA Trans. 130:277–296.