References
- Atkins AG. 2003. Modelling metal cutting using modern ductile fracture mechanics: quantitative explanations for some longstanding problems. Int J Mech Sci. 45(2):373–396.
- Ehlers S, Tabri K, Romanoff J, Varsta P. 2012. Numerical and experimental investigation on the collision resistance of the X-core structure. Ships Offshore Struct. 7(1):21–29.
- Hong L. 2009. Simplified analysis and design of ships subjected to collision and grounding [PhD thesis]. Trondheim (Norway): Norwegian University of Science and Technology.
- Hong L, Amdahl J. 2008a. Crushing resistance of web girders in ship collision and grounding. Mar Struct. 21(4):374–401.
- Hong L, Amdahl J. 2008b. Plastic mechanism analysis of the resistance of ship longitudinal girders in grounding and collision. Ships Offshore Struct. 3(3):159–171.
- Hong L, Amdahl J. 2012. Rapid assessment of ship grounding over large contact surfaces. Ships Offshore Struct. 7(1):5–19.
- Jones N. 2011. Structural impact. Cambridge (UK): Cambridge University Press.
- Jones N, Jouri WS. 1987. A study of plate tearing for ship collision and grounding damage. J Ship Res. 31(4):253–268.
- Lu G, Calladine CR. 1990. On the cutting of a plate by a wedge. Int J Mech Sci. 32(4):293–313.
- Lu G, Ong LS, Ng HW. 1994. An experimental study on tearing energy in splitting square metal tubes. Int J Mech Sci. 36(12):1087–1097.
- Muscat-Fenech C. 1996. The tearing of ships plating upon grounding. Reading (UK): Department of Engineering, University of Reading.
- Nguyen T, Garrè L, Amdahl J, Leira BJ. 2012. Benchmark study on the assessment of ship damage conditions during stranding. Ships Offshore Struct. 7(2):197–213.
- NORSOK. 2004. Design of steel structures, N-004, Revision 2. Trondheim (Norway): Norwegian Petroleum Industry.
- Paik JK. 1994. Cutting of a longitudinally stiffened plate by a wedge. J Ship Res. 38(4):340–348.
- Paik JK. 2007. Practical techniques for finite element modeling to simulate structural crashworthiness in ship collisions and grounding (Part I: Theory). Ships Offshore Struct. 2(1):69–80.
- Pill I, Tabri K. 2011. Finite element simulations of ship collisions: a coupled approach to external dynamics and inner mechanics. Ships Offshore Struct. 6(1–2):59–66.
- Pippenger DT. 1995. Coupled vertical and horizontal resistance of hull girder in grounding accidents. Cambridge (MA): Massachusetts Institute of Technology.
- Rodd JL. 1996. Observations on conventional and advanced double hull grounding experiments. International conference on design and methodologies for collision and grounding protection of ships; August 22–23, 1996. San Francisco (CA). p. 13.1–13.13.
- Shen WQ, Fung KW, Triantafyllos P, Wajid NM, Nordin N. 1998. An experimental study on the scaling of plate cutting. Int J Impact Eng. 21(8):645–662.
- Simonsen BC. 1997. Ship grounding on rock – II. validation and application. Mar Struct. 10(7):563–584.
- Simonsen BC. 1998. Plate tearing by a cone. Int J Mech Sci. 40(11):1145–1158.
- Simonsen BC, Wierzbicki T. 1997. Plasticity, fracture and friction in steady state plate cutting. Int J Impact Eng. 19(8):667–691.
- Tabri K. 2012. Influence of coupling in the prediction of ship collision damage. Ships Offshore Struct. 7(1):47–54.
- Vaughan H. 1978. Bending and tearing of plate with application to ship-bottom damage. Naval Archit. 35(3):97–99.
- Vaughan H. 1980. The tearing strength of mild steel plate. J Ship Res. 24(2):96–100.
- Wang G. 1995. Structural analysis of ships’ collision and grounding [dissertation]. Tokyo: Department of Naval Architecture and Ocean Engineering, University of Tokyo.
- Wang G, Ohtsubo H, Liu D. 1997. A simple method for predicting the grounding strength of ships. J Ship Res. 41(3):241–247.
- Wierzbicki T, Culbertson Driscoll J. 1995. Crushing damage of web girders under localized static loads. J Constr Steel Res. 33(3):199–235.
- Wierzbicki T, Thomas P. 1993. Closed-form solution for wedge cutting force through thin metal sheets. Int J Mech Sci. 35(3):209–229.
- Yu Z, Hu Z, Wang G. 2013a. Plastic mechanism analysis of structural performances for stiffeners on bottom floor plating during shoal grounding accident. In: Romanoff J, Guedes Soares C. Analysis and design of marine structures. Baco Raton (FL): CRC Press. p. 219–229.
- Yu Z, Hu Z, Wang G, Jiang Z. 2013b. Plastic mechanism analysis of structural performances for stiffeners on outer bottom plate during shoal grounding accident. In: Amdahl J, Ehlers S, Leira BJ. Collision and grounding of ships and offshore structures. Baco Raton (FL): CRC Press. p. 151–159.
- Zhang S. 2002. Plate tearing and bottom damage in ship grounding. Mar Struct. 15(2):101–117.
- Zheng ZM, Wierzbicki T. 1996. A theoretical study of steady-state wedge cutting through metal plates. Int J Fract. 78(1):45–66.
- Zhiqiang H, Jørgen A, Lin H. 2011. Verification of a simplified analytical method for predictions of ship groundings over large contact surfaces by numerical simulations. Mar Struct. 24(4):436–458.