Evaluation of multi-pass welding-induced residual stress using numerical and experimental approaches

References

• ANSYS. 2012. Online manuals. Release.
   Google Scholar
• Chang P-H, Teng T-L. 2004. Numerical and experimental investigations on the residual stresses of the butt-welded joints. Comp Mater Sci. 29(4):511–522.
   Web of Science ®Google Scholar
• Chen B-Q, Guedes Soares C. 2016. Numerical and experimental investigation on the weld-induced deformation and residual stress in stiffened plates with brackets. Int J Adv Manuf Tech. 86(9–12):2723–2733.
   Web of Science ®Google Scholar
• Chen B-Q, Hashemzadeh M, Guedes Soares C. 2014a. Numerical and experimental studies on temperature and distortion patterns in butt-welded plates. Int J Adv Manuf Tech. 72(5–8):1121–1131.
   Web of Science ®Google Scholar
• Chen BQ, Hashemzadeh M, Guedes Soares C. 2014b. Numerical analysis of the effects of weld parameters on distortions and residual stresses in butt welded steel plates. London: Francis & Taylor Group.
   Google Scholar
• Chen B-Q, Hashemzadeh M, Guedes Soares C. 2017. Validation of numerical simulations with X-ray diffraction measurements of residual stress in butt-welded steel plates. Ships Offshore Struct. 13(3):273–282.
   Web of Science ®Google Scholar
• Deng D, Murakawa H. 2006. Numerical simulation of temperature field and residual stress in multi-pass welds in stainless steel pipe and comparison with experimental measurements. Comp Mater Sci. 37(3):269–277.
   Web of Science ®Google Scholar
• En-15305. 2008. Nondestructive testing-test method for residual stress analysis by X-ray diffraction.
   Google Scholar
• Friedman E. 1975. Thermomechanical analysis of the welding process using the finite element method. J Press Vess Technol. 97(3):206–213.
   Google Scholar
• Fu G, Gurova T, Lourenco MI, Estefen SF. 2015. Numerical and experimental studies of residual stresses in multipass welding of high strength shipbuilding steel. J Ship Res. 59(3):133–144.
   Web of Science ®Google Scholar
• Gannon L, Liu Y, Pegg N, Smith MJ. 2012. Effect of welding-induced residual stress and distortion on ship hull girder ultimate strength. Mar Struct. 28(1):25–49.
   Web of Science ®Google Scholar
• Gannon L, Liu Y, Pegg N, Smith MJ. 2016. Nonlinear collapse analysis of stiffened plates considering welding-induced residual stress and distortion. Ships Offshore Struc. 11(3):228–244.
   Web of Science ®Google Scholar
• Gery D, Long H, Maropoulos P. 2005. Effects of welding speed, energy input and heat source distribution on temperature variations in butt joint welding. J Mater Process Tech. 167(2–3):393–401.
   Web of Science ®Google Scholar
• Goldak J, Chakravarti A, Bibby M. 1984. A new finite element model for welding heat sources. Metall Trans B. 15(2):299–305.
   Web of Science ®Google Scholar
• Gou R, Zhang Y, Xu X, Sun L, Yang Y. 2011. Residual stress measurement of new and in-service X70 pipelines by X-ray diffraction method. NDT&E Int. 44(5):387–393.
   Web of Science ®Google Scholar
• Guedes Soares C. 1988. Design equation for the compressive strength of unstiffened plate elements with initial imperfections. J Constr Steel Res. 9(4):287–310.
   Web of Science ®Google Scholar
• Hashemzadeh M, Chen BQ, Guedes Soares C. 2014a. Comparison between different heat sources types in thin-plate welding simulation. London: Francis & Taylor Group.
   Google Scholar
• Hashemzadeh M, Chen BQ, Guedes Soares C. 2014b. Numerical and experimental study on butt weld with dissimilar thickness of thin stainless steel plate. Int J Adv Manuf Tech. 78(1–4):319–330.
   Web of Science ®Google Scholar
• Javadi Y, Pirzaman HS, Raeisi MH, Najafabadi MA. 2013. Ultrasonic inspection of a welded stainless steel pipe to evaluate residual stresses through thickness. Mater Design. 49:591–601.
   Web of Science ®Google Scholar
• Kalakoutsky N. 1888. The study of internal stresses in cast iron and steel. London.
   Google Scholar
• Kenno S, Das S, Kennedy J, Rogge R, Gharghouri M. 2010. Residual stress distributions in ship hull specimens. Mar Struct. 23:263–273.
   Web of Science ®Google Scholar
• Khan NZ, Khan ZA, Siddiquee AN. 2015. Effect of shoulder diameter to pin diameter (D/D) ratio on tensile strength of friction stir welded 6063 aluminium alloy. Mater Today Proc. 2(4–5):1450–1457.
   Google Scholar
• Maekawa A, Kawahara A, Serizawa H, Murakawa H. 2015. Fast three-dimensional multipass welding simulation using an iterative substructure method. J Mater Process Tech. 215:30–41.
   Web of Science ®Google Scholar
• Magoga T, Flockhart C. 2014. Effect of weld-induced imperfections on the ultimate strength of an aluminium patrol boat determined by the Isfem rapid assessment method. Ships Offshore Struct. 9(2):218–235.
   Web of Science ®Google Scholar
• Prime MB. 2001. Cross-sectional mapping of residual stresses by measuring the surface contour after a Cut. Trans-Am Soc Mech Eng J Eng Mater Technol. 123(2):162–168.
   Web of Science ®Google Scholar
• Smith CS. 1975. Compressive strength of welded steel ship grillages. Dunfermline: Naval Construction Research Establishment.
   Google Scholar
• Tebedge N, Alpsten G, Tall L. 1973. Residual-stress measurement by the sectioning method. Exp Mech. 13(2):88–96.
   Web of Science ®Google Scholar
• Ueda Y, Yamakawa T. 1971. Analysis of thermal elastic-plastic stress and strain during welding by finite element method. Trans Japan Welding Soc. 2(2):90–100.
   Google Scholar
• Yao T. 2000. Ultimate hull girder strength. ISSC2000 Special Task Committee VI. 2, 2.
   Google Scholar