Ductile fracture prediction of EH36 grade steel based on Hosford–Coulomb model

References

• Amini MR, Nemat-Nasser S. 2010. Micromechanisms of ductile fracturing of DH-36 steel plates under impulsive loads and influence of polyuria reinforcing. Int J Fract. 162(1-2):205–217. doi: 10.1007/s10704-010-9469-6
   Web of Science ®Google Scholar
• Bai Y. 2008. Effect of loading history on necking and fracture [PhD thesis]. Cambridge (MA): Massachusetts Institute of Technology.
   Google Scholar
• Bai Y, Wierzbicki T. 2010. Application of extended Mohr-Coulomb criterion to ductile fracture. Int J Fract. 161(1):1–20. doi: 10.1007/s10704-009-9422-8
   Web of Science ®Google Scholar
• Bai Y, Wierzbicki T. 2015. A comparative study of three groups of ductile fracture loci in the 3D space. Eng Fract Mech. 135:147–167. doi: 10.1016/j.engfracmech.2014.12.023
   Web of Science ®Google Scholar
• Bao Y, Wierzbicki T. 2004. On fracture locus in the equivalent strain and stress triaxiality space. Int J Mech Sci. 46(1):81–98. doi: 10.1016/j.ijmecsci.2004.02.006
   Web of Science ®Google Scholar
• Bonora N. 1997. A nonlinear CDM model for ductile failure. Eng Fract Mech. 58(1–2):11–28. doi: 10.1016/S0013-7944(97)00074-X
   Web of Science ®Google Scholar
• Bonora N, Gentile D, Pirondi A, Newaz G. 2005. Ductile damage evolution under triaxial state of stress: theory and experiments. Int J Plast. 21(5):981–1007. doi: 10.1016/j.ijplas.2004.06.003
   Web of Science ®Google Scholar
• Boyce BL, Kramer SL, Bosiljevac TR, Corona E, Moore JA, Elkhodary K, Simha CHM, Williams BW, Cerrone AR, Nonn A, et al. 2016. The second Sandia fracture challenge: predictions of ductile failure under quasi-static and moderate-rate dynamic loading. Int J Fract. 198(1–2):5–100. doi: 10.1007/s10704-016-0089-7
   Web of Science ®Google Scholar
• Boyce BL, Kramer SL, Fang HE, Cordova TE, Neilsen MK, Dion K, Kaczmarowski AK, Karasz E, Xue L, Gross AJ, et al. 2014. The Sandia fracture challenge: blind round robin predictions of ductile tearing. Int J Fract. 186(1-2):5–68. doi: 10.1007/s10704-013-9904-6
   Web of Science ®Google Scholar
• Cerik BC, Park S-J, Choung J. 2018a. Ductile fracture modeling of DH36 grade steels. Proceedings of the ASME2018 37th International Conference on Ocean, Offshore and Arctic Engineering; Jun 17–22; Madrid, Spain.
   Google Scholar
• Cerik BC, Park S-J, Lee K, Choung J. 2018b. Simulation of ship collision grounding damage using Hosford-Coulomb fracture model for shell elements. Submitted to Ocean Engineering.
   Google Scholar
• Cho S-R, Choi S-I, Son S-K. 2015. Dynamic material properties of marine steels under impact loadings. Proceedings of the 2015 World Congress on Advances in Structural Engineering and Mechanics (ASEM2015); Aug 25–29; Incheon, Korea.
   Google Scholar
• Choung J, Nam W, Lee D, Song CY. 2014. Failure strain formulation via average stress triaxiality of an EH36 high strength steel. Ocean Eng. 91:218–226. doi: 10.1016/j.oceaneng.2014.09.019
   Web of Science ®Google Scholar
• Choung J, Shim C-S, Song H-C. 2012. Estimation of failure strain of EH36 high strength marine structural steel using average stress triaxiality. Marine Struct. 29:1–21. doi: 10.1016/j.marstruc.2012.08.001
   Web of Science ®Google Scholar
• Dunand M, Mohr D. 2010. Hybrid experimental-numerical analysis of basic ductile fracture experiments for sheet metals. Int J Solids Struct. 47(9):1130–1143. doi: 10.1016/j.ijsolstr.2009.12.011
   Web of Science ®Google Scholar
• Erice B, Roth CC, Mohr D. 2018. Stress-state and strain-rate dependent ductile fracture of dual and complex phase steel. Mech Mater. 116:11–32. doi: 10.1016/j.mechmat.2017.07.020
   Web of Science ®Google Scholar
• Fras T, Roth CC, Mohr D. 2018. Fracture of high-strength armor steel under impact loading. Int J Impact Eng. 111:147–164. doi: 10.1016/j.ijimpeng.2017.09.009
   Web of Science ®Google Scholar
• Gao X, Zhang G, Roe C. 2010. A study on the effect of the stress state on ductile fracture. Int J Damage Mech. 19:75–94. doi: 10.1177/1056789509101917
   Web of Science ®Google Scholar
• Gorji MB, Mohr D. 2018. Predicting shear fracture of aluminum 6016-T4 during deep drawing: combining Yld-2000 plasticity with Hosford-Coulomb fracture model. Int J Mech Sci. 137:105–120. doi: 10.1016/j.ijmecsci.2018.01.008
   Web of Science ®Google Scholar
• Gurson AL. 1977. Continuum theory of ductile rupture by void nucleation and growth: part I-yield criteria and flow rules for porous ductile media. J Eng Mater Technol. 99(1):2–14. doi: 10.1115/1.3443401
   Web of Science ®Google Scholar
• Kofiani K, Nonn A, Wierzbicki T. 2013. New calibration method for high and low triaxiality and validation on SENT specimens of API X70. Int J Press Vessels Pip. 111-112:187–201. doi: 10.1016/j.ijpvp.2013.07.004
   Web of Science ®Google Scholar
• Kõrgesaar M, Remes H, Romanoff J. 2014. Size dependent response of large shell elements under in-plane tensile loading. Int J Solids Struct. 51(21-22):3752–3761. doi: 10.1016/j.ijsolstr.2014.07.012
   Web of Science ®Google Scholar
• Kõrgesaar M, Romanoff J, Remes H, Palokangas P. 2018. Experimental and numerical penetration response of laser-welded stiffened panels. Int J Impact Eng. 114:78–92. doi: 10.1016/j.ijimpeng.2017.12.014
   Web of Science ®Google Scholar
• Lemaitre J. 1985. A continuous damage mechanics model for ductile fracture. J Eng Mater Technol. 107:83–89. doi: 10.1115/1.3225775
   Web of Science ®Google Scholar
• Lou Y, Chen L, Clausmeyer T, Tekkaya AE, Yoon JW. 2017. Modeling of ductile fracture from shear to balanced biaxial tension for sheet metals. Int J Solids Struct. 112:169–184. doi: 10.1016/j.ijsolstr.2016.11.034
   Web of Science ®Google Scholar
• Marcadet SJ, Mohr D. 2015. Effect of compression-tension loading reversal on the strain to fracture of dual phase steel sheets. Int J Plast. 72:21–43. doi: 10.1016/j.ijplas.2015.05.002
   Web of Science ®Google Scholar
• Martinez JL, Cyrino JC, Vaz MA. 2017. Continuum damage mechanics applied to numerical analysis of ship collisions. Marine Struct. 56:206–236. doi: 10.1016/j.marstruc.2017.08.003
   Web of Science ®Google Scholar
• Mohr D, Marcadet SJ. 2015. Micromechanically-motivated phenomenological Hosford-Coulomb model for predicting ductile fracture initiation at low stress triaxialities. Int J Solids Struct. 67-68:40–55. doi: 10.1016/j.ijsolstr.2015.02.024
   Web of Science ®Google Scholar
• Nahshon K, Hutchinson JW. 2008. Modification of the Gurson model for shear failure. Eur J Mech A Solids. 27(1):1–17. doi: 10.1016/j.euromechsol.2007.08.002
   Web of Science ®Google Scholar
• Nielsen KL, Tvergaard V. 2010. Ductile shear failure or plug failure of spot welds modelled by modified Gurson model. Eng Fract Mech. 77(7):1031–1047. doi: 10.1016/j.engfracmech.2010.02.031
   Web of Science ®Google Scholar
• Pack K. 2017. Modeling of sheet metal fracture for shell finite elements with component level validation [PhD thesis].; Cambridge (MA): Massachusetts Institute of Technology.
   Google Scholar
• Pack K, Mohr D. 2017. Combined necking & fracture model to predict ductile failure with shell finite elements. Eng Fract Mech. 182:32–51. doi: 10.1016/j.engfracmech.2017.06.025
   Web of Science ®Google Scholar
• Pack K, Roth CC. 2016. The second Sandia fracture challenge: blind prediction of dynamic shear localization and full fracture characterization. Int J Fract. 198(1-2):197–220. doi: 10.1007/s10704-016-0091-0
   Web of Science ®Google Scholar
• Papasidero J, Doquet V, Mohr D. 2014. Determination of the effect of stress state on the onset of ductile fracture through tension-torsion experiments. Exp Mech. 54(2):137–151. doi: 10.1007/s11340-013-9788-4
   Web of Science ®Google Scholar
• Papasidero J, Doquet V, Mohr D. 2015. Ductile fracture of aluminum 2024-T351 under proportional and non-proportional multi-axial loading: Bao–Wierzbicki results revisited. Int J Solids Struct. 69–70:459–474. doi: 10.1016/j.ijsolstr.2015.05.006
   Web of Science ®Google Scholar
• Pape G. 2003. Flow stress and ductile failure at varying strain rates [PhD dissertation]. Delft: TU Delft.
   Google Scholar
• Park S-J, Lee K, Choung J, Walters CL. 2018. Ductile fracture prediction of high tensile steel EH36 using new damage functions. Ships Offsh Struct. doi:10.1080/17445302.2018.1426433.
   Web of Science ®Google Scholar
• Roth CC, Mohr D. 2014. Effect of strain rate on ductile fracture initiation in advanced high strength steel sheets: experiments and modeling. Int J Plast. 56:19–44. doi: 10.1016/j.ijplas.2014.01.003
   Web of Science ®Google Scholar
• Roth CC, Mohr D. 2016. Ductile fracture experiments with locally proportional loading histories. Int J Plast. 79:328–354. doi: 10.1016/j.ijplas.2015.08.004
   Web of Science ®Google Scholar
• Tvergaard V, Needleman A. 1984. Analysis of the cup-cone fracture in a round tensile bar. Acta Metall. 32(1):157–169. doi: 10.1016/0001-6160(84)90213-X
   Google Scholar
• VanDerHorn E, Wang G. 2011. A statistical study on the material properties of shipbuilding steels. In: E. Rizzuto, C. Guedes Soares, editors. Sustainable maritime transportation and exploitation of sea resources. Boca Raton, FL: CRC Press. p. 371–378.
   Google Scholar
• Walters CL. 2014. Framework for adjusting for both stress triaxiality and mesh size effect for failure of metals in shell structures. Int J Crashworthiness. 19(1):1–12. doi: 10.1080/13588265.2013.825366
   Web of Science ®Google Scholar
• Wierzbicki T, Bao Y, Lee YW, Bai Y. 2005. Calibration and evaluation of seven fracture models. Int J Mech Sci. 47(4-5):719–743. doi: 10.1016/j.ijmecsci.2005.03.003
   Web of Science ®Google Scholar
• Xue L. 2007. Ductile fracture modeling: theory, experimental investigation and numerical verification [PhD thesis].; Cambridge (MA): Massachusetts Institute of Technology.
   Google Scholar
• Xue L. 2008. Constitutive modeling of void shearing effect in ductile fracture of porous materials. Eng Fract Mech. 75(11):3343–3366. doi: 10.1016/j.engfracmech.2007.07.022
   Web of Science ®Google Scholar