References
- Arriaga H, Gómez EA. 2009. Welding sequence analysis. Queretaro, Qro., Mexico: AGH University of Science and Technology.
- Biswas P, Kumar DA, Mandal NR, Mahapatra MM. 2011. A study on the effect of welding sequence in fabrication of large stiffened plate panels. J Marine Sci Appl. 10(4):429–436. doi: 10.1007/s11804-011-1088-8
- Brust FW, Wilkowski G, Shim DJ, Zhang T, Kurth E. 2009. Weld distortion control methods and applications of weld modeling. ASME Pressure Vessels and Piping Conference; Washington. p. 587–595.
- Chen B-Q, Guedes Soares C. 2016. Effect of welding sequence on temperature distribution, distortions, and residual stress on stiffened plates. Int J Adv Manuf Technol. 86(9–12):3145–3156. doi: 10.1007/s00170-016-8448-0
- Chen B-Q, Hashemzadeh M, Guedes Soares C. 2014. Numerical and experimental studies on temperature and distortion patterns in butt-welded plates. Int J Adv Manuf Technol. 72(5–8):1121–1131. doi: 10.1007/s00170-014-5740-8
- Chen Z, Chen Z, Shenoi RA. 2015. Influence of welding sequence on welding deformation and residual stress of a stiffened plate structure. Ocean Eng. 106:271–280. doi: 10.1016/j.oceaneng.2015.07.013
- Deng D, Murakawa H. 2008. Prediction of welding distortion and residual stress in a thin plate butt-welded joint. Comput Mater Sci. 43(2):353–365. doi: 10.1016/j.commatsci.2007.12.006
- Deng D, Murakawa H, Liang W. 2007. Numerical simulation of welding distortion in large structures. Comput Meth Applied Mech Eng. 196(45):4613–4627. doi: 10.1016/j.cma.2007.05.023
- Deng D, Murakawa H, Ueda Y. 2002. Theoretical prediction of welding distortion considering positioning and the gap between parts. The Twelfth International offshore and Polar Engineering Conference: International Society of Offshore and Polar Engineers; Hawaii. p. 337–343.
- Deng D, Murakawa H, Liang W. 2008. Prediction of welding distortion in a curved plate structure by means of elastic finite element method. J Mater Process Technol. 203(1):252–266. doi: 10.1016/j.jmatprotec.2007.10.009
- Fu G, Estefen SF, Gurova T, Lourenco MI. 2018. Effect of material model on residual stress and distortion in T-joint welding. Ships Offsh Struct. 13(1):56–64. doi: 10.1080/17445302.2017.1342894
- Fu G, Lourenço MI, Duan M, Estefen SF. 2016. Influence of the welding sequence on residual stress and distortion of fillet welded structures. Marine Struct. 46:30–55. doi: 10.1016/j.marstruc.2015.12.001
- Gannon L. 2011. Effect of welding residual stress and distortion on ship hull structural performance [thesis]. Nova Scotia (Canada): Dalhousie University.
- Gannon L, Liu Y, Pegg N, Smith M. 2010. Effect of welding sequence on residual stress and distortion in flat-bar stiffened plates. Marine Struct. 23(3):385–404. doi: 10.1016/j.marstruc.2010.05.002
- Gannon L, Liu Y, Pegg N, Smith MJ. 2013. Effect of three-dimensional welding-induced residual stress and distortion fields on strength and behaviour of flat-bar stiffened panels. Ships Offshore Struct. 8(5):565–578. doi: 10.1080/17445302.2012.707386
- Gery D, Long H, Maropoulos P. 2005. Effects of welding speed, energy input and heat source distribution on temperature variations in butt joint welding. J Mate Process Technol. 167(2):393–401. doi: 10.1016/j.jmatprotec.2005.06.018
- Goldak J, Chakravarti A, Bibby M. 1984. A new finite element model for welding heat sources. Metall Mater Transac B. 15(2):299–305. doi: 10.1007/BF02667333
- Hashemzadeh M, Garbatov Y, Guedes Soares C. 2015. Analysis of butt-weld induced distortion accounting for the welding sequences and weld toe geometry. Maritime Technol Eng. London: Taylor & Francis Group.
- Keivani R, Jahazi M, Pham T, Khodabandeh A, Afshar M. 2014. Predicting residual stresses and distortion during multisequence welding of large size structures using FEM. Int J Adv Manuf Technol. 73(1–4):409–419. doi: 10.1007/s00170-014-5833-4
- Kenno SY, Das S, Kennedy J, Rogge R, Gharghouri M. 2010. Distributions of residual stresses in stiffened plates with one and two stiffeners. Ships Offshore Struct. 5(3):211–225. doi: 10.1080/17445300903354240
- Liang W, Deng D. 2018. Influences of heat input, welding sequence and external restraint on twisting distortion in an asymmetrical curved stiffened panel. Adv Eng Soft. 115:439–451. doi: 10.1016/j.advengsoft.2017.11.002
- Lloyds Register. 2001. Rules and Regulation for the classification of ships, part 3, ship structures, July.
- McPherson N, Galloway A, McGhie W. 2013. Thin plate buckling mitigation and reduction challenges for naval ships. J Marine Eng Technol. 12(2):3–10.
- Mondal AK, Biswas P, Bag S. 2017. Prediction of welding sequence induced thermal history and residual stresses and their effect on welding distortion. Weld World. 61(4):711–721. doi: 10.1007/s40194-017-0468-3
- Park J-U, An GB. 2016. Effect of welding sequence to minimize fillet welding distortion in a ship’s small component fabrication using joint rigidity method. Proc Inst Mech Eng B J Eng Manuf. 230(4):643–653. doi: 10.1177/0954405415589716
- Schenk T. 2011. Modelling of welding distortion; the influence of clamping and sequencing. Mater Sci and Eng. Technical University of Delft, Netherlands.
- Wang J, Yin X, Murakawa H. 2013. Experimental and computational analysis of residual buckling distortion of bead-on-plate welded joint. J Mater Process Technol. 213(8):1447–1458. doi: 10.1016/j.jmatprotec.2013.02.009