References
- Acevedo C, Nussbaumer A. 2012. Effect of tensile residual stresses on fatigue crack growth and S-N curves in tubular joints loaded in compression. Int J Fatigue. 36(1):171–180.
- Ahmadi H. 2019. Probabilistic analysis of the DoB in axially-loaded tubular KT-joints of offshore structures. Appl Ocean Res. 87(6):64–80.
- Ahmadi H, Alizadeh Atalo A. 2021. Geometrical effects on the Degree of Bending (DoB) of multi-planar tubular KK-joints in jacket substructure of offshore wind turbines. Appl Ocean Res. 111(C). Paper ID: 102678.
- Ahmadi H, Amini Niaki M. 2019. Effects of geometrical parameters on the Degree of Bending (DoB) in two-planar tubular DT-joints of offshore jacket structures subjected to axial and bending loads. Marine Structures. 64(C):229–245.
- Ahmadi H, Asoodeh S. 2016. Parametric study of geometrical effects on the Degree of Bending (DoB) in offshore tubular K-joints under out-of-plane bending loads. Appl Ocean Res. 58:1–10.
- Ahmadi H, Ghaffari A. 2015a. Probabilistic analysis of stress intensity factor (SIF) and Degree of Bending (DoB) in axially loaded tubular K-joints of offshore structures. Latin American Journal of Solids and Structures. 12(11):2025–2044.
- Ahmadi H, Ghaffari A. 2015b. Probabilistic assessment of Degree of Bending (DoB) in tubular X-Joints of offshore structures subjected to bending loads. Adv Civil Eng. Paper ID 518450:1–12.
- Ahmadi H, Zavvar E. 2020. Degree of bending (DoB) in offshore tubular KT-joints under the axial, in-plane bending (IPB), and out-of-plane bending (OPB) loads. Appl Ocean Res. 95:102015.
- Ahmadi H, Lotfollahi-Yaghin MA, Asoodeh S. 2015. Degree of Bending (DoB) in tubular K-Joints of offshore structures subjected to in-plane bending (IPB) loads: study of geometrical effects and parametric formulation. Ocean Eng. 102(7):105–116.
- Ahmadi H, Lotfollahi-Yaghin MA, Yong-Bo S. 2013. Chord-side SCF distribution of central brace in internally ring-stiffened tubular KT-joints: a geometrically parametric study. Thin-Walled Struct. 70:93–105.
- Ahmadi H, Shadi C, Ahmad K. 2020. Effects of geometrical parameters on the degree of bending (DoB) in multi-planar tubular XT-joints of offshore structures subjected to axial loading. Appl Ocean Res. 104:102381.
- Ahmadpour F, Zeinoddini M, Mo'tamedi M, Rashnooie R. 2021. Experimental study of fire effects on out-of-plane bending strength/flexibility of steel tubular T-joints. Structures. 34:2174–2188.
- Asoodeh S, Ahmadi H, Lotfollahi-Yaghin M A. 2014. Effects of geometrical parameters on the Degree of Bending (DoB) in tubular K-Joints of offshore structures subjected to In-Plane Bending (IPB) Loading[C]// Icopmas.
- Connolly MPM. 1987. A fracture mechanics approach to the fatigue assessment of tubular welded Y and K-joints. (Doctoral dissertation, University College London (University of London)).
- Dong P. 2001. A structural stress definition and numerical implementation for fatigue analysis of welded joints. Int J Fatigue. 23(10):865–876.
- Efthymiou M. 1988. Development of SCF formulae and generalised influence functions for use in fatigue analysis[C]//Proceedings of the Conference on Recent Developments in Tubular Joints Technology. 1988: 1-13.
- Lee MMK, Bowness D. 2002. Estimation of stress intensity factor solutions for weld toe cracks in offshore tubular joints. Int J Fatigue. 24(8):861–875.
- Liu G, Zhao XL, Huang Y. 2015. Prediction of stress distribution along the intersection of tubular T-joints by a novel structural stress approach. Int J Fatigue. 80:216–230.
- Lotfollahi-Yaghin MA, Ahmadi H. 2010. Effect of geometrical parameters on SCF distribution along the weld toe of tubular KT-joints under balanced axial loads. Int J Fatigue. 32(4):703–719.
- Morgan MR, Lee MMK. 1998. Prediction of stress concentrations and degrees of bending in axially loaded tubular K-joints. J Constr Steel Res. 45(1):67–97.
- Myers PT, Brennan FP, Dover WD. 2001. The effect of rack/rib plate on the stress concentration factors in jack-up chords. Marine Structures. 14(4-5):485–505.
- Qian X, Petchdemaneengam Y, Swaddiwudhipong S, Marshall P, Ou Z, Nguyen CT. 2013. Fatigue performance of tubular X-joints with PJP+ welds: I — experimental study. J Constr Steel Res. 90:49–59.
- Schaumann P, Schuermann K. 2018. New proposal to express notch stress approach results by equivalent SCFs. Int J Fatigue. 119(FEB.):11–19.
- Schumacher A, Nussbaumer A. 2006. Experimental study on the fatigue behaviour of welded tubular K-joints for bridges. Eng Struct. 28(5):745–755.
- Shao Y-B. 2004. Proposed equations of stress concentration factor (SCF) for Gap tubular K-joints subjected to bending load. Int J Space Struct. 19(3):137–147.
- Shao YB. 2007. Geometrical effect on the stress distribution along weld toe for tubular T- and K-joints under axial loading. J Constr Steel Res. 63(10):1351–1360.
- Talei-Faz B, Brennan FP, Dover WD. 2004. Residual static strength of high strength steel cracked tubular joints. Marine Structures. 17(3-4):291–309.
- Woghiren CO, Brennan FP. 2009. Weld toe stress concentrations in multi-planar stiffened tubular KK joints. Int J Fatigue. 31(1):164–172.
- Xu C, Liu G, Li Z, et al. 2020. Multiaxial fatigue life prediction of tubular K-joints using an alternative structural stress approach. Ocean Eng. 212:107598.
- Zhang J, Yue X, Qiu J, Chen L, Shen W. 2021. A bracket-stiffened two-planar overlapped tubular KT-joint for offshore jack-up fatigue analysis. Advances in Civil Engineering. 2021, Article ID 8890075: 1–18.