Analysis of the interface stress of riser composite piles

References

• Abu-Hamdeh NH. 2003. Thermal properties of soils as affected by density and water content. Biosystems Eng. 86(1):97–102. doi:10.1016/S1537-5110(03)00112-0
   Web of Science ®Google Scholar
• Amaechi CV. Local tailored design of deep water composite risers subjected to burst, collapse and tension loads. Ocean Eng, 2022, 250: 110196. doi:10.1016/j.oceaneng.2021.110196
   Web of Science ®Google Scholar
• Amaechi CV, Gillett N, Odijie AC, Hou X, Ye J. 2019. Composite risers for deep waters using a numerical modelling approach. Compos Struct. 210:486–499. doi:10.1016/j.compstruct.2018.11.057
   Web of Science ®Google Scholar
• Amaechi CV, Wang F, Ye J. 2022. Understanding the fluid–structure interaction from wave diffraction forces on CALM buoys: numerical and analytical solutions. Ships Offsh Struct. 1–29. doi:10.1080/17445302.2021.2005361
   Web of Science ®Google Scholar
• Cekerevac C, Laloui L. 2004. Experimental study of thermal effects on the mechanical behaviour of a clay . Int J Numer Anal Methods Geomech. 28(3):209–228. doi:10.1002/nag.332
   Web of Science ®Google Scholar
• Gashti EHN, Malaska M, Kujala K. 2014. Evaluation of thermo-mechanical behaviour of composite energy piles during heating/cooling operations . Eng Struct. 75(sep.15):363–373.. doi:10.1016/j.engstruct.2014.06.018
   Google Scholar
• Huang L, Yang F, Zhang J. 2009. Grouting connection between pile foundation and jacket for offshore wind turbine . Water Resour Hydropower Eng. 40(9). doi: 10.3969/j.issn.1000-0860.2009.09.011.
   Google Scholar
• Liang C, Liu R. 2021. Calculation method for the vertical bearing capacity of a riser-surface casing composite pile. Ships Offsh Struct. 16(sup2):66–76. doi:10.1080/17445302.2020.1861711
   Google Scholar
• Liang C, Liu R, Wan J, Guan P, Li X. 2018. Study on vertical bearing capacity of the riser composite pile in clay [C]// international conference on offshore mechanics and Arctic engineering. Am Soc Mech Eng. 51302:V009T10A015. doi: 10.1007/s13344-021-0023-2
   Google Scholar
• Liu J, Xiong G, Zhu B, Ying P. 2015. Horizontal bearing and deformation characteristics of large diameter single pile in sandy seabed. Rock Soil Mech. 36(2):591–598. doi:10.16285/j.rsm.2015.02.040
   Google Scholar
• Liu R, Liang C. 2021. Study of the bearing capacity at the variable cross-section of a riser-surface casing composite pile. China Ocean Eng. 35(2):262–271. doi:10.1007/s13344-021-0023-2
   Web of Science ®Google Scholar
• Lotsberg I. 2013. Structural mechanics for design of grouted connections in monopile wind turbine structures. Mar Struct. 32(jul.):113–135. doi:10.1016/j.marstruc.2013.03.001
   Google Scholar
• Salciarini D, Ronchi F, Cattoni E, Tamagnini C. 2013. Thermomechanical effects induced by energy piles operation in a small piled raft. Int J Geomech. 15(2):04014042.1–04014042.14. doi: 10.1061/(ASCE)GM.1943-5622.0000375.
   Web of Science ®Google Scholar
• Wang Z, Zhang R, Wang K, et al. 2019. Bearing characteristics of static drilling rooted piles under energy carrier. J Zhejiang Univ (Eng Sci). 53(01):16–23 + 55. doi: 10.3785/j.issn.1008-973X.2019.01.002.
   Google Scholar
• Xu R, Yuan G, Liu J, Chen T. 2015. Stress analysis of grouting connection section of offshore wind turbine jacket foundations. South Energy Constr. 2(3):80–85. doi:10.16516/j.gedi.issn2095-8676.2015.03.016
   Google Scholar
• Yan S, Huo Z, Sun L, Liu R. 2013. Study on working and bearing characteristics of bucket foundations of offshore wind turbines. Rock Soil Mech. 07:2036–2042.
   Google Scholar
• Yao R, Du L, Lv S, Shen M. 2018. Study on the correlation between thermal conductivity and physical parameters of silty clay in Changchun. World Geol. 037(003):976–981. doi:10.3969/j.issn.1004-5589.2018.03.031
   Google Scholar
• Zhai H, Yang J, Zhou J, Liu S, Yang L, Cai Z. 2008. Experimental analysis on the cementing strength between riser and soil. Oil Drill Prod Technol. 02:36–37. doi:10.3969/j.issn.1000-7393.2008.02.007
   Google Scholar
• Zhou Z, Wang H, Dai X, Li D, Xu M. 2014. Calculation of offshore oil production wellbore temperature and optimal design of heat-proof string. China Pet Mach. 42(4). doi:10.3969/j.issn.1001-4578.2014.04.011
   Google Scholar