Investigation of ablation studies of EPS pattern produced by rapid prototyping

References

• Ahn, D.G., Lee, S.H., and Yang, D.Y., 2002. Investigation into thermal characteristics of linear hotwire cutting system for variable lamination manufacturing (VLM) process by using expandable polystyrene foam. International Journal of Machine Tools & Manufacture, 42, 427–439. doi: 10.1016/S0890-6955(01)00144-4
   Web of Science ®Google Scholar
• Ahn, D.G., Lee, S.H., and Yang, D.Y., 2005. Influence of process parameters on the surface roughness in hotwire cutting of EPS EPS sheet for VLM-S rapid prototyping process. Journal of Materials Science, 40, 5699–5702. doi: 10.1007/s10853-005-1192-8
   Web of Science ®Google Scholar
• Aitchison, D.R., et al., 2007. Transient temperature effects in hot-wire plastic EPS cutting. 4th International Conference on Design and Production of Machines & Dies/Molds, 19–30 June, Cesme, Turkey, 219–224.
   Google Scholar
• Aitchison, D.R., et al., 2011. Rapid manufacturing facilitation through optimal machining prediction of polystyrene foam. Virtual and Physical Prototyping, 6 (1), 41–46. doi: 10.1080/17452759.2010.533961
   Google Scholar
• Brooks, H.L. and Aitchison, D.R., 2009. Force feedback temperature control for hot-tool plastic EPS cutting. Journal of Engineering Manufacture, 224, 1–11.
   Google Scholar
• Chen, H.Z, Shan, Z.D., and Dong, H.Z., 2013. Research of EPS pattern processing for lost EPS casting. Applied Mechanics and Materials, 331, 600–603. doi: 10.4028/www.scientific.net/AMM.331.600
   Google Scholar
• Coquard, R., Baillis, D., and Quenard, D., 2006. Experimental and theoretical study of the hot-wire method applied to low-density thermal insulators. International Journal of Heat and Mass Transfer, 49 (23–24), 4511–4524. doi: 10.1016/j.ijheatmasstransfer.2006.05.016
   Web of Science ®Google Scholar
• Guler, K.A., Taslicukur, Z., and Ozer, G., 2011. Expanded polystyrene (EPS) pattern application in investment casting and chemical removing. Ceramic Materials, 63 (1), 138–142.
   Google Scholar
• Horváth, I., et al., 1998. Tool profile and tool path calculation for free-form thick-layered fabrication. Computer-Aided Design, 30 (14), 1097–1110. doi: 10.1016/S0010-4485(98)00068-2
   Web of Science ®Google Scholar
• Hur, J., et al., 2002. Hybrid rapid prototyping system using machining and deposition. Computer Aided Design, 34, 741–754. doi: 10.1016/S0010-4485(01)00203-2
   Web of Science ®Google Scholar
• Jiang, W., et al., 2013. Influence of gas flowrate on filling ability and internal quality of A356 aluminum alloy castings fabricated using the expendable pattern shell casting with vacuum and low pressure. International Journal of Advanced Manufacturing Technology, 67, 2459–2468. doi: 10.1007/s00170-012-4663-5
   Web of Science ®Google Scholar
• Jiang, W., Fan, Z., and Li, C., 2015. Improved steel/aluminum bonding in bimetallic castings by a compound casting process. Journal of Materials Processing Technology, 226, 25–31. doi: 10.1016/j.jmatprotec.2015.06.032
   Web of Science ®Google Scholar
• Jiang, W., et al., 2016. Investigation on the interface characteristics of Al/Mg bimetallic castings processed by lost EPS casting. Metallurgical and Materials Transactions A, 47 (5), 2462–2470. doi: 10.1007/s11661-016-3395-9
   Web of Science ®Google Scholar
• Jouaneh, M., Hammad, A., and Datseris, P., 1997. A flexible automated foam cutting system. International Journal of Machine Tools & Manufacture, 37 (4), 437–449. doi: 10.1016/S0890-6955(96)00022-3
   Web of Science ®Google Scholar
• Karunakaran, K.P., et al., 2000. Optimal stock removal in LOM-RP. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 214 (10), 947–951. doi: 10.1243/0954405001518017
   Web of Science ®Google Scholar
• Karunakaran, K.P., et al., 2005. Segmented object manufacturing. IIE Transactions, 37 (4), 291–302. doi: 10.1080/07408170590516999
   Web of Science ®Google Scholar
• Mehta, S., Biederman, S., and Shivkumar, S., 1995. Thermal degradation of foamed polystyrene. Journal of Materials Science, 30, 2944–2949. doi: 10.1007/BF00349667
   Web of Science ®Google Scholar
• Mikheyev, M., 1968. Fundamentals of heat transfer. 2nd printing, Moscow: MIR Publishers, 73–81.
   Google Scholar
• Petkov, K.P. and Hattel, J.H., 2016. A thermo-electro-mechanical simulation model for hot wire cutting of EPS foam. International Journal of Machine Tools and Manufacture, 107, 50–59. doi: 10.1016/j.ijmachtools.2016.05.002
   Web of Science ®Google Scholar
• Petkov, K.P. and Hattel, J.H., 2017a. Hot-blade cutting of EPS foam for double-curved surfaces—numerical simulation and experiments. International Journal of Advanced Manufacturing Technology, 93, 4253–4264. doi: 10.1007/s00170-017-0807-y
   Web of Science ®Google Scholar
• Petkov, K.P. and Hattel, J.H., 2017b. Thermo-electrical mathematical model for prediction of Ni-Cr hot-wire temperature in free air and inside small circular cavities. Heat Transfer Engineering, 38 (9), 881–891. doi: 10.1080/01457632.2016.1211919
   Web of Science ®Google Scholar
• Ramaswamy, K., 1997. Process planning for shape deposition manufacturing. Ph.D. dissertation, Department of Mechanical Engineering, Stanford University, Stanford, CA.
   Google Scholar
• Santos, W.N.D., 2005. Thermal properties of melt polymers by the hot wire technique. Polymer Testing, 24 (7), 932–936. doi: 10.1016/j.polymertesting.2005.06.001
   Web of Science ®Google Scholar
• Srinivasan, N. and Prasad, Y., 1993. Hot-working characteristics of nichrome and the development of a processing map. Journal of Materials Processing Technology, 41 (4), 409–422. doi: 10.1016/0924-0136(94)90005-1
   Web of Science ®Google Scholar
• Taylor, J.B., et al., 2001. Contoured edge slice generation in rapid prototyping via 5-axis machining. Robotics and Computer-Integrated Manufacturing, 17 (1–2), 13–18. doi: 10.1016/S0736-5845(00)00032-6
   Web of Science ®Google Scholar