References
- Arie, M., Shooshtari, A., and Ohadi, M., 2018. Experimental characterization of an additively manufactured heat exchanger for dry cooling of power plants. Applied Thermal Engineering, 129, 187–198. doi: 10.1016/j.applthermaleng.2017.09.140
- Bhattacharya, A. and Mahajan, R., 2002. Finned metal foam heat sinks for electronics cooling in forced convection. Journal of Electronic Packaging, 124 (3), 155–163. doi: 10.1115/1.1464877
- Black, J. and Kohser, R., 2011. 12th, ed. DeGarmo’s materials and processes in manufacturing. s.l.: Wiley.
- Carter, L.N., et al., 2014. The influence of the laser scan strategy on grain structure and cracking behaviour in SLM powder-bed fabricated nickel superalloy. Journal of Alloys and Compounds, 615, 338–347. doi: 10.1016/j.jallcom.2014.06.172
- Casting, n.d. Simis Precision Casting Pvt.Ltd. [Online]. Available from: http://www.simiscasting.com/ [Accessed 14 December 2017].
- Chapman, C.L., Lee, S., and Schmidt, B.L., 1994. Thermal performance of an elliptical pin fin heat sink. s.l., 10th IEEE semi-therm symp.
- EOS, n.d. Materials for metal additive manufacturing [Online]. Available from: https://www.eos.info/material-m [Accessed 15 October 2016].
- Fasano, M., et al., 2016. Passive heat transfer enhancement by 3D printed pitot tube based heat sink. International Communications in Heat and Mass Transfer, 74, 36–39. doi: 10.1016/j.icheatmasstransfer.2016.03.012
- Han, X., et al., 2018. Investigation on selective laser melting AlSi10Mg cellular lattice strut: molten pool morphology, surface roughness and dimensional accuracy. Materials, 11 (3), 392. doi: 10.3390/ma11030392
- Haskell, M., 2010. Comparing the impact of different heat sink materials on cooling performance [Online]. Available from: https://www.ecnmag.com/article/2010/04/comparing-impact-different-heat-sink-materials-cooling-performance [Accessed 15 August 2016].
- Ho, J.Y., et al., 2017. Convective heat transfer performance of airfoil heat sinks fabricated by selective laser melting. International Journal of Thermal Sciences, 114, 213–228. doi: 10.1016/j.ijthermalsci.2016.12.016
- Ledezma, G. and Bejan, A., 1996. Heat sinks with sloped plate fins in natural and forced convection. International Journal of Heat and Mass Transfer, 39 (9), 1773–1783. doi: 10.1016/0017-9310(95)00297-9
- Magics, M., n.d. [Online] Available from: http://www.materialise.com/en/software/magics-3d-printing-software [Accessed 12 November 2016].
- Manfredi, D., et al., 2014. Additive manufacturing of al alloys and aluminium matrix composites (AMCs). W.A.Monteiro: InTech.
- Pal, V., 2014. Modeling and thermal analysis of heat sink with scales on fins cooled by natural convection. International Journal of Research in Engineering and Technology, 3 (6), 359–362. doi: 10.15623/ijret.2014.0306067
- See, Y. and Leaong, K., 2017. Heat transfer study of 3-D printed air-cooled heat sinks. In: Slovenia, international conference on heat transfer, fluid mechanics and thermodynamics.
- Shamvedi, D., et al., 2017. Surface treatment of 3D metal printed microwave components. Dublin: 18th Research Colloquium on Radio Science and Communications for a Smarter World.
- Sing, S.L., Wiria, F.E., and Yeong, W.Y., 2018. Selective laser melting of lattice structures: a statistical approach to manufacturability and mechanical behavior. Robotics and Computer-Integrated Manufacturing, 49, 170–180. doi: 10.1016/j.rcim.2017.06.006
- Smith, R., 2016a. Thermal testing of a 3D printed non-uniform heat sink against state-of-art finned geometry [Online].
- Smith, R., 2016b. Thermal testing of a 3D printed super dense mesh heat sink against state-of-art finned geometry [Online].
- Stone, E., 2014. Heat sinks are an ideal DMLS application [Online]. Available from: https://www.i3dmfg.com/heat-sinks-ideal-dmls-application/ [Accessed 4 July 2017].
- Sukumar, R., et al., 2013. Modelling and analysis of heat sink with rectangular fins having through holes. International Journal of Engineering Research and Applications (IJERA), 3 (2), 1557–1561.
- Ventola, L., et al., 2014. Rough surfaces with enhanced heat transfer for electronics cooling by direct metal laser sintering. International Journal of Heat and Mass Transfer, 75, 58–74. doi: 10.1016/j.ijheatmasstransfer.2014.03.037
- Wakefield-vette, n.d. Wakefield-vette [Online]. Available from: http://www.wakefield-vette.com/products/natural-convection/thermal-extrusions-overview/CategoryID/15/Default.aspx [Accessed 2 July 2016].
- Wen, T., et al., 2006. Forced convection in metallic honeycomb structures. International Journal of Heat and Mass Transfer, 49, 3313–3324. doi: 10.1016/j.ijheatmasstransfer.2006.03.024
- Wong, M., et al., 2009. Convective heat transfer and pressure losses across novel heat sinks fabricated by selective laser melting. International Journal of Heat and Mass Transfer, 52 (1-2), 281–288. doi: 10.1016/j.ijheatmasstransfer.2008.06.002
- Wong, K.K., et al., 2016. Fabrication of heat sinks by selective laser melting for convective heat transfer applications. Virtual and Physical Prototyping, 11 (3), 159–165. doi: 10.1080/17452759.2016.1211849