A framework for multi-objective optimisation of 3D part-build orientation with a desired angular resolution in additive manufacturing processes

References

• Ahn, D., H. Kim, and S. Lee. 2009. “Surface Roughness Prediction Using Measured Data and Interpolation in Layered Manufacturing.” Journal of Materials Processing Technology 209 (2): 664–671. doi: 10.1016/j.jmatprotec.2008.02.050
   Web of Science ®Google Scholar
• Alexander, P., S. Allen, and D. Dutta. 1998. “Part Orientation and Build Cost Determination in Layered Manufacturing.” Computer-Aided Design 30 (5): 343–356. doi: 10.1016/S0010-4485(97)00083-3
   Web of Science ®Google Scholar
• Anitha, R., S. Arunachalam, and P. Radhakrishnan. 2001. “Critical Parameters Influencing the Quality of Prototypes in Fused Deposition Modeling.” Journal of Materials Processing Technology 118 (1): 385–388. doi: 10.1016/S0924-0136(01)00980-3
   Web of Science ®Google Scholar
• Arora, J. 2016. Introduction to Optimal Design, Fourth Edition. London: Academic Press.
   Google Scholar
• Bos, F., R. Wolfs, Z. Ahmed, and T. Salet. 2016. “Additive Manufacturing of Concrete in Construction: Potentials and Challenges of 3D Concrete Printing.” Virtual and Physical Prototyping 11 (3): 209–225. doi: 10.1080/17452759.2016.1209867
   Web of Science ®Google Scholar
• Campbell, R. I., M. Martorelli, and H. S. Lee. 2002. “Surface Roughness Visualisation for Rapid Prototyping Models.” Computer-Aided Design 34 (10): 717–725. doi: 10.1016/S0010-4485(01)00201-9
   Web of Science ®Google Scholar
• Chanin, M. N., C. H. Kuei, and C. Lin. 1990. “Using Taguchi Design, Regression Analysis and Simulation to Study Maintenance Float Systems.” The International Journal Of Production Research 28 (11): 1939–1953. doi: 10.1080/00207549008942844
   Web of Science ®Google Scholar
• Cheng, W., J. Y. H. Fuh, A. Y. C. Nee, Y. S. Wong, H. T. Loh, and T. Miyazawa. 1995. “Multi-objective Optimization of Part-Building Orientation in Stereolithography.” Rapid Prototyping Journal 1 (4): 12–23. doi: 10.1108/13552549510104429
   Web of Science ®Google Scholar
• Durgun, I., and R. Ertan. 2014. “Experimental Investigation of FDM Process for Improvement of Mechanical Properties and Production Cost.” Rapid Prototyping Journal 20 (3): 228–235. doi: 10.1108/RPJ-10-2012-0091
   Web of Science ®Google Scholar
• Frank, D., and G. Fadel. 1995. “Expert System-Based Selection of the Preferred Direction of Build for Rapid Prototyping Processes.” Journal of Intelligent Manufacturing 6 (5): 339–345. doi: 10.1007/BF00124677
   Web of Science ®Google Scholar
• Gaynor, A. T., and J. K. Guest. 2016. “Topology Optimization Considering Overhang Constraints: Eliminating Sacrificial Support Material in Additive Manufacturing Through Design.” Structural and Multidisciplinary Optimization 54 (5): 1157–1172. doi: 10.1007/s00158-016-1551-x
   Web of Science ®Google Scholar
• Hanzl, P., M. Zetek, T. Bakša, and T. Kroupa. 2015. “The Influence of Processing Parameters on the Mechanical Properties of SLM Parts.” Procedia Engineering 100: 1405–1413. doi: 10.1016/j.proeng.2015.01.510
   Google Scholar
• Huang, X., C. Ye, S. Wu, K. Guo, and J. Mo. 2009. “Sloping Wall Structure Support Generation for Fused Deposition Modeling.” The International Journal of Advanced Manufacturing Technology 42 (11–12): 1074–1081. doi: 10.1007/s00170-008-1675-2
   Web of Science ®Google Scholar
• Ituarte, I. F., E. Coatanea, M. Salmi, J. Tuomi, and J. Partanen. 2015. “Additive Manufacturing in Production: A Study Case Applying Technical Requirements.” Physics Procedia 78: 357–366. doi: 10.1016/j.phpro.2015.11.050
   Google Scholar
• Jackiewicz, J. 2017. “Manufacturing of Instructional Aids for Students at Low Cost by Means of 3D Printing.” Materials and Manufacturing Processes 32 (10): 1116–1130. doi: 10.1080/10426914.2016.1257135
   Web of Science ®Google Scholar
• Jayanth, N., P. Senthil, and C. Prakash. 2018. “Effect of Chemical Treatment on Tensile Strength and Surface Roughness of 3D-Printed ABS Using the FDM Process.” Virtual and Physical Prototyping 13 (3): 155–163. doi: 10.1080/17452759.2018.1449565
   Web of Science ®Google Scholar
• Khodaygan, S., and A. H. Golmohammadi. 2017. “Multi-criteria Optimization of the Part Build Orientation (PBO) Through a Combined Meta-Modeling/NSGAII/TOPSIS Method for Additive Manufacturing Processes.” International Journal on Interactive Design and Manufacturing (IJIDeM) 12 (3): 1071–1085. doi: 10.1007/s12008-017-0443-7
   Google Scholar
• Kumar, R. S., N. Alagumurthi, and R. Ramesh. 2009. “Calculation of Total Cost, Tolerance Based on Taguchi’s, Asymmetric Quality Loss Function Approach.” American Journal of Engineering and Applied Sciences 2 (4): 689–701. doi: 10.3844/ajeassp.2015.689.701
   Google Scholar
• Kuo, Y. H., C. C. Cheng, Y. S. Lin, and C. H. San. 2017. “Support Structure Design in Additive Manufacturing Based on Topology Optimization.” Structural and Multidisciplinary Optimization 57 (1): 183–195. doi: 10.1007/s00158-017-1743-z
   Web of Science ®Google Scholar
• Lan, P. T., S. Y. Chou, L. L. Chen, and D. Gemmill. 1997. “Determining Fabrication Orientations for Rapid Prototyping with Stereolithography Apparatus.” Computer-Aided Design 29 (1): 53–62. doi: 10.1016/S0010-4485(96)00049-8
   Web of Science ®Google Scholar
• Langelaar, M. 2018. “Combined Optimization of Part Topology, Support Structure Layout and Build Orientation for Additive Manufacturing.” Structural and Multidisciplinary Optimization 57 (5): 1985–2004. doi: 10.1007/s00158-017-1877-z
   Web of Science ®Google Scholar
• Leary, M., L. Merli, F. Torti, M. Mazur, and M. Brandt. 2014. “Optimal Topology for Additive Manufacture: A Method for Enabling Additive Manufacture of Support-Free Optimal Structures.” Materials & Design 63: 678–690. doi: 10.1016/j.matdes.2014.06.015
   Web of Science ®Google Scholar
• Moroni, G., W. P. Syam, and S. Petrò. 2015. “Functionality-based Part Orientation for Additive Manufacturing.” Procedia CIRP 36: 217–222. doi: 10.1016/j.procir.2015.01.015
   Google Scholar
• Padhye, N., and K. Deb. 2011. “Multi-objective Optimisation and Multi-Criteria Decision Making in SLS Using Evolutionary Approaches.” Rapid Prototyping Journal 17 (6): 458–478. doi: 10.1108/13552541111184198
   Web of Science ®Google Scholar
• Pandey, P. M., K. Thrimurthulu, and N. V. Reddy. 2004. “Optimal Part Deposition Orientation in FDM by Using a Multicriteria Genetic Algorithm.” International Journal of Production Research 42 (19): 4069–4089. doi: 10.1080/00207540410001708470
   Web of Science ®Google Scholar
• Paul, R., and S. Anand. 2015. “Optimization of Layered Manufacturing Process for Reducing Form Errors with Minimal Support Structures.” Journal of Manufacturing Systems 36: 231–243. doi: 10.1016/j.jmsy.2014.06.014
   Web of Science ®Google Scholar
• Phatak, A. M., and S. S. Pande. 2012. “Optimal Part Orientation in Rapid Prototyping Using the Genetic Algorithm.” Journal of Manufacturing Systems 31 (4): 395–402. doi: 10.1016/j.jmsy.2012.07.001
   Web of Science ®Google Scholar
• Raghunath, N., and P. M. Pandey. 2007. “Improving Accuracy Through Shrinkage Modeling by Using Taguchi Method in Selective Laser Sintering.” International Journal of Machine Tools and Manufacture 47 (6): 985–995. doi: 10.1016/j.ijmachtools.2006.07.001
   Web of Science ®Google Scholar
• Rao, S. S. 2009. Engineering Optimization: Theory and Practice. Hoboken: John Wiley & Sons.
   Google Scholar
• Rosen, D. W. 2016. “A Review of Synthesis Methods for Additive Manufacturing.” Virtual and Physical Prototyping 11 (4): 305–317. doi: 10.1080/17452759.2016.1240208
   Web of Science ®Google Scholar
• Triantaphyllou, E. 2000. “Multi-criteria Decision Making Methods.” In Multi-criteria Decision Making Methods: A Comparative Study, 5–21. Boston, MA: Springer.
   Google Scholar
• Tsai, C. S., and N. Mort. 1996, September. “Simulation and optimisation in manufacturing systems using Taguchi methods.” In Control’96, UKACC International Conference on (Conf. Publ. No. 427) (Vol. 1, pp. 467–472). IET.
   Google Scholar
• Ulu, E., E. Korkmaz, K. Yay, O. B. Ozdoganlar, and L. B. Kara. 2015. “Enhancing the Structural Performance of Additively Manufactured Objects Through Build Orientation Optimization.” Journal of Mechanical Design 137 (11): 111410. doi: 10.1115/1.4030998
   Web of Science ®Google Scholar
• Zhang, Y., A. Bernard, R. K. Gupta, and R. Harik. 2016. “Feature Based Building Orientation Optimization for Additive Manufacturing.” Rapid Prototyping Journal 22 (2): 358–376. doi: 10.1108/RPJ-03-2014-0037
   Web of Science ®Google Scholar
• Zhou, J. G., D. Herscovici, and C. C. Chen. 2000. “Parametric Process Optimization to Improve the Accuracy of Rapid Prototyped Stereolithography Parts.” International Journal of Machine Tools and Manufacture 40 (3): 363–379. doi: 10.1016/S0890-6955(99)00068-1
   Web of Science ®Google Scholar
• Zhou, Y., and K. Saitou. 2017, August. “Gradient-based multi-component topology optimization for additive manufacturing (MTO-A).” In ASME 2017 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (pp. V02AT03A033-V02AT03A033). American Society of Mechanical Engineers.
   Google Scholar