References
- ASTM. 2015. ASTM D2095 - 96, Standard Test Method for Tensile Strength of Adhesives by Means of Bar and Rod Specimens.
- Bourell, D., J. P. Kruth, M. Leu, G. Levy, D. Rosen, A. M. Beese, and A. Clare, 2017. “Materials for Additive Manufacturing.” CIRP Annals 66 (2): 659–681. http://www.sciencedirect.com/science/article/pii/S0007850617301488. doi: 10.1016/j.cirp.2017.05.009
- Carneiro, O., A. Silva, and R. Gomes. 2015. “Fused Deposition Modeling with Polypropylene.” Materials & Design 83: 768–776. doi: 10.1016/j.matdes.2015.06.053
- Chacón, J., M. Caminero, E. García-Plaza, and P. Núñez. 2017. “Additive Manufacturing of PLA Structures using Fused Deposition Modelling: Effect of Process Parameters on Mechanical Properties and their Optimal Selection.” Materials & Design 124: 143–157. doi: 10.1016/j.matdes.2017.03.065
- da Silva, L. F. 2011. Handbook of Adhesion Technology. Heidelberg: Springer.
- Eiliat, H., and R. J. Urbanic. 2018. “Minimizing Voids for a Material Extrusion-based Process.” Rapid Prototyping Journal 24 (2): 485–500. doi: 10.1108/RPJ-05-2017-0092
- Espalin, D., J. A. Ramirez, F. Medina, and R. Wicker. 2014. “Multi-material, Multi-technology FDM: Exploring Build Process Variations.” Rapid Prototyping Journal 20 (3): 236–244. https://doi.org/10.1108/RPJ-12-2012-0112.
- Fernandez-Vicente, M., W. Calle, S. Ferrandiz, and A. Conejero. 2016. “Effect of Infill Parameters on Tensile Mechanical Behavior in Desktop 3d Printing.” 3D Printing and Additive Manufacturing 3 (3): 183–192. doi: 10.1089/3dp.2015.0036
- Gao, W., Y. Zhang, D. Ramanujan, K. Ramani, Y. Chen, C. B. Williams, C. C. L. Wang, Y. C. Shin, S. Zhang, and P. D. Zavattieri, 2015. “The Status, Challenges, and Future of Additive Manufacturing in Engineering.” Computer-Aided Design 69: 65–89. http://www.sciencedirect.com/science/article/pii/S0010448515000469. doi: 10.1016/j.cad.2015.04.001
- Garland, A., and G. Fadel. 2015. “Design and Manufacturing Functionally Gradient Material Objects with an Off the Shelf Three-dimensional Printer: Challenges and Solutions.” Journal of Mechanical Design 137 (11): 111407. http://dx.doi.org/10.1115/1.4031097.
- Goh, G. D., Y. L. Yap, S. Agarwala, and W. Y. Yeong. 2019. “Recent Progress in Additive Manufacturing of Fiber Reinforced Polymer Composite.” Advanced Materials Technologies 4 (1): 1800271. doi: 10.1002/admt.201800271
- Goh, G. D., Y. L. Yap, H. K. J. Tan, S. L. Sing, G. L. Goh, and W. Y. Yeong. 2019. “Process–Structure–Properties in Polymer Additive Manufacturing via Material Extrusion: A Review.” Critical Reviews in Solid State and Materials Sciences. doi: 10.1080/10408436.2018.1549977
- Hegemann, D., H. Brunner, and C. Oehr. 2003. “Plasma Treatment of Polymers for Surface and Adhesion Improvement.” Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms 208: 281–286. doi: 10.1016/S0168-583X(03)00644-X
- Jiang, J., G. Hu, X. Li, X. Xu, P. Zheng, and J. Stringer. 2019. “Analysis and Prediction of Printable Bridge Length in Fused Deposition Modelling based on Back Propagation Neural Network.” Virtual and Physical Prototyping. doi:10.1080/17452759.2019.1576010.
- Jiang, J., J. Lou, and G. Hu. 2019. “Effect of Support on Printed Properties in Fused Deposition Modelling Processes.” Virtual and Physical Prototyping. doi:10.1080/17452759.2019.1568835.
- Jiang, J., J. Stringer, and X. Xu. 2018. “Support Optimization for Flat Features via Path Planning in Additive Manufacturing.” 3D Printing and Additive Manufacturing. doi:10.1089/3dp.2017.0124.
- Jiang, J., J. Stringer, X. Xu, and P. Zheng. 2018a. “A Benchmarking Part for Evaluating and Comparing Support Structures of Additive Manufacturing.” Proceedings of the 3rd International Conference on Progress in Additive Manufacturing (Pro-AM 2018), 196–201. doi: 10.25341/D42G6H
- Jiang, J., J. Stringer, X. Xu, and R. Y. Zhong. 2018b. “Investigation of Printable Threshold Overhang Angle in Extrusion-based Additive Manufacturing for Reducing Support Waste.” International Journal of Computer Integrated Manufacturing 31 (10): 961–969. doi: 10.1080/0951192X.2018.1466398
- Jiang, J., X. Xu, and J. Stringer. 2018. “Support Structures for Additive Manufacturing: A Review.” Journal of Manufacturing and Materials Processing 2 (4): 64. doi: 10.3390/jmmp2040064
- Kinloch, A. 1980. “The Science of Adhesion.” Journal of Materials Science 15 (9): 2141–2166. doi: 10.1007/BF00552302
- Ligon, S. C., R. Liska, J. Stampfl, M. Gurr, and R. Mülhaupt. 2017. “Polymers for 3d Printing and Customized Additive Manufacturing.” Chemical Reviews 117 (15): 10212–10290. doi: 10.1021/acs.chemrev.7b00074
- Loh, G. H., E. Pei, D. Harrison, and M. D. Monzón. 2018. “An Overview of Functionally Graded Additive Manufacturing.” Additive Manufacturing 23: 34–44. http://www.sciencedirect.com/science/article/pii/S221486041730564X. doi: 10.1016/j.addma.2018.06.023
- Lopes, L., A. Silva, and O. Carneiro. 2018. “Multi-material 3d Printing: The Relevance of Materials Affinity on the Boundary Interface Performance.” Additive Manufacturing 23: 45–52. http://www.sciencedirect.com/science/article/pii/S2214860418301544. doi: 10.1016/j.addma.2018.06.027
- Lumpe, T. S., J. Mueller, and K. Shea. 2019. “Tensile Properties of Multi-material Interfaces in 3d Printed Parts.” Materials & Design 162: 1–9. http://www.sciencedirect.com/science/article/pii/S0264127518308311. doi: 10.1016/j.matdes.2018.11.024
- Mohan, N., P. Senthil, S. Vinodh, and N. Jayanth. 2017. “A Review on Composite Materials and Process Parameters Optimisation for the Fused Deposition Modelling Process.” Virtual and Physical Prototyping 12 (1): 47–59. http://dx.doi.org/10.1080/17452759.2016.1274490.
- Mosaic. 2018. Introducing Palette 2. Accessed 31 October 2018. https://www.mosaicmfg.com.
- Mueller, J., D. Courty, M. Spielhofer, R. Spolenak, and K. Shea. 2017. “Mechanical Properties of Interfaces in Inkjet 3d Printed Single- and Multi-material Parts.” 3D Printing and Additive Manufacturing 4 (4): 193–199. https://doi.org/10.1089/3dp.2017.0038.
- Packham, D. 2003. “Surface Energy, Surface Topography and Adhesion.” International Journal of Adhesion and Adhesives 23 (6): 437–448. http://www.sciencedirect.com/science/article/pii/S014374960300068X. doi: 10.1016/S0143-7496(03)00068-X
- Patterson, A. E., P. Bahumanyam, R. Katragadda, and S. L. Messimer. 2018. “Automated Assembly of Discrete Parts using Fused Deposition Modeling.” Rapid Prototyping Journal 24 (2): 249–260. doi:10.1108/RPJ-01-2017-0016.
- Pizzi, A., and K. Mittal. 1999. Adhesion Promotion Techniques. New York: Marcel Dekker.
- Popescu, D., A. Zapciu, C. Amza, F. Baciu, and R. Marinescu. 2018. “Fdm Process Parameters Influence Over the Mechanical Properties of Polymer Specimens: A Review.” Polymer Testing 69: 157–166. http://www.sciencedirect.com/science/article/pii/S0142941818306093. doi: 10.1016/j.polymertesting.2018.05.020
- Ribeiro, M., O. S. Carneiro, and A. F. da Silva. 2018. “Interface Geometries in 3d Multi-material Prints by Fused Filament Fabrication.” Rapid Prototyping Journal. https://doi.org/10.1108/RPJ-05-2017-0107.
- Santana, L., J. L. Alves, and A. da Costa Sabino Netto. 2017. “A Study of Parametric Calibration for Low Cost 3d Printing: Seeking Improvement in Dimensional Quality.” Materials & Design 135: 159–172. http://www.sciencedirect.com/science/article/pii/S0264127517308523. doi: 10.1016/j.matdes.2017.09.020
- Schultz, J., and M. Nardin. 1999. “Theories and Mechanisms of Adhesion.” Materials Engineering -New York 14: 1–26.
- Seppala, J. E., and K. D. Migler. 2016. “Infrared Thermography of Welding Zones Produced by Polymer Extrusion Additive Manufacturing.” Additive Manufacturing 12: 71–76. doi: 10.1016/j.addma.2016.06.007
- Tibbits, S. 2014. “4d printing: Multi-material Shape Change.” Architectural Design 84 (1): 116–121. http://dx.doi.org/10.1002/ad.1710.
- Turner, B. N., and S. A. Gold. 2015. “A Review of Melt Extrusion Additive Manufacturing Processes: II. Materials, Dimensional Accuracy, and Surface Roughness.” Rapid Prototyping Journal 21 (3): 250–261. https://doi.org/10.1108/RPJ-02-2013-0017.
- Turner, B. N., R. Strong, and S. A. Gold. 2014. “A Review of Melt Extrusion Additive Manufacturing Processes: I. Process Design and Modeling.” Rapid Prototyping Journal 20 (3): 192–204. https://doi.org/10.1108/RPJ-01-2013-0012.
- Ultimaker. 2018a. Technical Data Sheet - Ultimaker CPE. Accessed 22 August 2018. https://ultimaker.com/en/resources/49914-cpe.
- Ultimaker. 2018b. Technical Data Sheet - Ultimaker PLA. Accessed 22 August 2018. https://ultimaker.com/en/resources/49911-pla.
- Ultimaker. 2018c. Technical Data Sheet - Ultimaker TPU. Accessed 22 August 2018. https://ultimaker.com/en/resources/49917-tpu-95a.
- Ultimaker. 2018d. Ultimaker 3. Accessed 3 August 2018. https://ultimaker.com/en/products/ultimaker-3.
- Ultimaker. 2018e. Ultimaker Cura Software. Accessed 3 August 2018. https://ultimaker.com/en/products/ultimaker-cura-software.
- Vaezi, M., S. Chianrabutra, B. Mellor, and S. Yang. 2013. “Multiple Material Additive Manufacturing – Part 1: A Review.” Virtual and Physical Prototyping 8 (1): 19–50. http://dx.doi.org/10.1080/17452759.2013.778175.
- Wang, J., H. Xie, Z. Weng, T. Senthil, and L. Wu. 2016. “A Novel Approach to Improve Mechanical Properties of Parts Fabricated by Fused Deposition Modeling.” Materials & Design 105: 152–159. doi: 10.1016/j.matdes.2016.05.078
- Wolszczak, P., K. Lygas, M. Paszko, and R. A. Wach. 2018. “Heat Distribution in Material During Fused Deposition Modelling.” Rapid Prototyping Journal 24 (3): 615–622. http://dx.doi.org/10.1108/RPJ-04-2017-0062,
- Yin, J., C. Lu, J. Fu, Y. Huang, and Y. Zheng. 2018. “Interfacial Bonding During Multi-material Fused Deposition Modeling (fdm) Process Due to Inter-molecular Diffusion.” Materials & Design 150: 104–112. http://www.sciencedirect.com/science/article/pii/S0264127518302995. doi: 10.1016/j.matdes.2018.04.029
- Zhang, J., X. Z. Wang, W. W. Yu, and Y. H. Deng. 2017. “Numerical Investigation of the Influence of Process Conditions on the Temperature Variation in Fused Deposition Modeling.” Materials & Design 130: 59–68. doi: 10.1016/j.matdes.2017.05.040