Research progress of ceramic matrix composite parts based on additive manufacturing technology

References

• Alemán, J. V., A. V. Chadwick, J. He, M. Hess, K. Horie, R. G. Jones, P. Kratochvíl, et al. 2007. “Definitions of Terms Relating to the Structure and Processing of Sols, Gels, Networks, and Inorganic-organic Hybrid Materials (IUPAC Recommendations 2007).” Pure and Applied Chemistry 79 (10): 1801–1829. doi:10.1351/pac200779101801.
   Web of Science ®Google Scholar
• Bae, Chang-Jun, and John W. Halloran. 2011. “Influence of Residual Monomer on Cracking in Ceramics Fabricated by Stereolithography.” International Journal of Applied Ceramic Technology 8 (6): 1289–1295. doi:10.1111/j.1744-7402.2010.02578.x.
   Web of Science ®Google Scholar
• Beaman, Joseph J., and Carl R. Deckard. 1990. “Selective Laser Sintering with Assisted Powder Handling.” Google Patents.
   Google Scholar
• Bouville, F., E. Maire, S. Meille, B. Van de Moortele, A. J. Stevenson, and S. Deville. 2014. “Strong, Tough and Stiff Bioinspired Ceramics from Brittle Constituents.” Nature Materials 13 (5): 508–514. doi:10.1038/nmat3915.
   PubMed Web of Science ®Google Scholar
• Brunello, G., S. Sivolella, R. Meneghello, L. Ferroni, C. Gardin, A. Piattelli, B. Zavan, and E. Bressan. 2016. “Powder-based 3D Printing for Bone Tissue Engineering.” Biotechnology Advances 34 (5): 740–753. doi:10.1016/j.biotechadv.2016.03.009.
   PubMed Web of Science ®Google Scholar
• Cai, Kunpeng, Benito Román-Manso, Jim E. Smay, Ji Zhou, María Isabel Osendi, Manuel Belmonte, Pilar Miranzo, and H. J. Kleebe. 2012. “Geometrically Complex Silicon Carbide Structures Fabricated by Robocasting.” Journal of the American Ceramic Society 95 (8): 2660–2666. doi:10.1111/j.1551-2916.2012.05276.x.
   Web of Science ®Google Scholar
• Calignano, Flaviana, Diego Manfredi, Elisa Paola Ambrosio, Sara Biamino, Mariangela Lombardi, Eleonora Atzeni, Alessandro Salmi, Paolo Minetola, Luca Iuliano, and Paolo Fino. 2017. “Overview on Additive Manufacturing Technologies.” Proceedings of the IEEE 105 (4): 593–612. doi:10.1109/jproc.2016.2625098.
   Web of Science ®Google Scholar
• Calvert, Paul, Tung Liang Lin, and Hogan Martin. 1997. “Extrusion Freeform Fabrication of Chopped-fibre Reinforced Composites.” High Performance Polymers 9 (4): 449–456. doi: 10.1088/0954-0083/9/4/008
   Web of Science ®Google Scholar
• Cao, Jiwei, Zhongliang Lu, Kai Miao, Hongjiong Zhao, Yuanlin Xia, Fu Wang, and Bingheng Lu. 2019. “Fabrication of High-strength Porous SiC-based Composites with Unidirectional Channels.” Journal of the American Ceramic Society. doi:10.1111/jace.16332.
   Web of Science ®Google Scholar
• Carrijo, Mylena Mayara Matias, Hannes Lorenz, Ina Filbert-Demut, Guilherme Mariz de Oliveira Barra, Dachamir Hotza, Xiaowei Yin, Peter Greil, and Nahum Travitzky. 2016. “Fabrication of Ti3SiC2 -based Composites via Three-dimensional Printing: Influence of Processing on the Final Properties.” Ceramics International 42 (8): 9557–9564. doi:10.1016/j.ceramint.2016.03.036.
   Web of Science ®Google Scholar
• Cesarano III, Joseph, and Ilhan A. Aksay. 1988. “Processing of Highly Concentrated Aqueous α-alumina Suspensions Stabilized with Polyelectrolytes.” Journal of the American Ceramic Society 71 (12): 1062–1067. doi: 10.1111/j.1151-2916.1988.tb05792.x
   Web of Science ®Google Scholar
• Cesarano, III, and R. Segalman. 1998. “Robocasting Provides Moldless Fabrication from Slurry Deposition.” Ceramic Industry 148 (4): 94–100.
   Google Scholar
• Chen, An-Nan, Meng Li, Jia-Min Wu, Li-Jin Cheng, Rong-Zhen Liu, Yu-Sheng Shi, and Chen-Hui Li. 2019. “Enhancement Mechanism of Mechanical Performance of Highly Porous Mullite Ceramics with Bimodal Pore Structures Prepared by Selective Laser Sintering.” Journal of Alloys and Compounds 776: 486–494. doi:10.1016/j.jallcom.2018.10.337.
   Web of Science ®Google Scholar
• Chen, An-Nan, Meng Li, Jie Xu, Chen-Hua Lou, Jia-Min Wu, Li-Jin Cheng, Yu-Sheng Shi, and Chen-Hui Li. 2018. “High-porosity Mullite Ceramic Foams Prepared by Selective Laser Sintering Using Fly Ash Hollow Spheres as Raw Materials.” Journal of the European Ceramic Society 38 (13): 4553–4559. doi:10.1016/j.jeurceramsoc.2018.05.031.
   Web of Science ®Google Scholar
• Chen, Yong, and Charlie C. L. Wang. 2013. “Regulating Complex Geometries Using Layered Depth-normal Images for Rapid Prototyping and Manufacturing.” Rapid Prototyping Journal 19 (4): 253–268. doi:10.1108/13552541311323263.
   Web of Science ®Google Scholar
• Chen, An-Nan, Jia-Min Wu, Kai Liu, Jing-Yan Chen, Huan Xiao, Peng Chen, Chen-Hui Li, and Yu-Sheng Shi. 2017. “High-performance Ceramic Parts with Complex Shape Prepared by Selective Laser Sintering: A Review.” Advances in Applied Ceramics 117 (2): 100–117. doi:10.1080/17436753.2017.1379586.
   Web of Science ®Google Scholar
• Cheng, Kai, HongBo Lan, ShuTing Zou, Lei Qian, and DiChen Li. 2017. “Research on Active Mixing Printhead for Multi-material and Multi-scale 3D Printing.” Scientia Sinica Technologica 47 (2): 149–162. doi:10.1360/n092016-00312.
   Google Scholar
• Christ, Susanne, Martin Schnabel, Elke Vorndran, Jürgen Groll, and Uwe Gbureck. 2015. “Fiber Reinforcement During 3D Printing.” Materials Letters 139: 165–168. doi:10.1016/j.matlet.2014.10.065.
   Web of Science ®Google Scholar
• Compton, B. G., and J. A. Lewis. 2014. “3D-printing of Lightweight Cellular Composites.” Advanced Materials 26 (34): 5930–5935. doi:10.1002/adma.201401804.
   PubMed Web of Science ®Google Scholar
• Conner, Brett P., Guha P. Manogharan, Ashley N. Martof, Lauren M. Rodomsky, Caitlyn M. Rodomsky, Dakesha C. Jordan, and James W. Limperos. 2014. “Making Sense of 3-D Printing: Creating a Map of Additive Manufacturing Products and Services.” Additive Manufacturing 1–4: 64–76. doi:10.1016/j.addma.2014.08.005.
   Google Scholar
• Davim, J. Paulo, and Pedro Reis. 2005. “Damage and Dimensional Precision on Milling Carbon Fiber-reinforced Plastics Using Design Experiments.” Journal of Materials Processing Technology 160 (2): 160–167. doi:10.1016/j.jmatprotec.2004.06.003.
   Web of Science ®Google Scholar
• Deng, Yong, Weiguo Li, Ruzhuan Wang, Jiaxing Shao, Peiji Geng, and Jianzuo Ma. 2016. “The Temperature-dependent Fracture Models for Fiber-reinforced Ceramic Matrix Composites.” Composite Structures 140: 534–539. doi:10.1016/j.compstruct.2016.01.020.
   Web of Science ®Google Scholar
• Eckel, Z. C., C. Zhou, J. H. Martin, A. J. Jacobsen, W. B. Carter, and T. A. Schaedler. 2016. “Additive Manufacturing of Polymer-derived Ceramics.” Science 351 (6268): 58. doi: 10.1126/science.aad2688
   PubMed Web of Science ®Google Scholar
• Exner, H., M. Horn, A. Streek, F. Ullmann, L. Hartwig, P. Regenfuß, and R. Ebert. 2008. “Laser Micro Sintering: A New Method to Generate Metal and Ceramic Parts of High Resolution with Sub-micrometer Powder.” Virtual and Physical Prototyping 3 (1): 3–11. doi:10.1080/17452750801907970.
   Google Scholar
• Faes, M., H. Valkenaers, F. Vogeler, J. Vleugels, and E. Ferraris. 2015. “Extrusion-based 3D Printing of Ceramic Components.” Procedia CIRP 28: 76–81. doi:10.1016/j.procir.2015.04.028.
   Google Scholar
• Franchin, Giorgia, Paolo Scanferla, Luca Zeffiro, Hamada Elsayed, Andrea Baliello, Giovanni Giacomello, Marco Pasetto, and Paolo Colombo. 2017. “Direct Ink Writing of Geopolymeric Inks.” Journal of the European Ceramic Society 37 (6): 2481–2489. doi:10.1016/j.jeurceramsoc.2017.01.030.
   Web of Science ®Google Scholar
• Franchin, Giorgia, Larissa Wahl, and Paolo Colombo. 2017. “Direct Ink Writing of Ceramic Matrix Composite Structures.” Journal of the American Ceramic Society 100 (10): 4397–4401. doi:10.1111/jace.15045.
   Web of Science ®Google Scholar
• Frketic, Jolie, Tarik Dickens, and Subramanian Ramakrishnan. 2017. “Automated Manufacturing and Processing of Fiber-reinforced Polymer (FRP) Composites: An Additive Review of Contemporary And Modern Techniques for Advanced Materials Manufacturing.” Additive Manufacturing 14: 69–86. doi:10.1016/j.addma.2017.01.003.
   Web of Science ®Google Scholar
• Fu, Z., L. Schlier, N. Travitzky, and P. Greil. 2013. “Three-dimensional Printing of SiSiC Lattice Truss Structures.” Materials Science and Engineering: A 560: 851–856. doi:10.1016/j.msea.2012.09.107.
   Web of Science ®Google Scholar
• Gaytan, S. M., M. A. Cadena, H. Karim, D. Delfin, Y. Lin, D. Espalin, E. MacDonald, and R. B. Wicker. 2015. “Fabrication of Barium Titanate by Binder Jetting Additive Manufacturing Technology.” Ceramics International 41, (5, Part A): 6610–6619. doi:10.1016/j.ceramint.2015.01.108.
   Web of Science ®Google Scholar
• Gnanasekaran, K., T. Heijmans, S. van Bennekom, H. Woldhuis, S. Wijnia, G. de With, and H. Friedrich. 2017. “3D printing of CNT- and Graphene-based Conductive Polymer Nanocomposites by Fused Deposition Modeling.” Applied Materials Today 9: 21–28. doi:10.1016/j.apmt.2017.04.003.
   Web of Science ®Google Scholar
• Gomes, Cynthia M., Antonio P. N. Oliveira, Dachamir Hotza, Nahum Travitzky, and Peter Greil. 2008. “LZSA Glass-ceramic Laminates: Fabrication and Mechanical Properties.” Journal of Materials Processing Technology 206 (1-3): 194–201. doi:10.1016/j.jmatprotec.2007.12.011.
   Web of Science ®Google Scholar
• Gomes, C., N. Travitzky, P. Greil, W. Acchar, H. Birolis, A. P. N. de Oliveira, and D. Hotza. 2011. “Laminated Object Manufacturing of LZSA Glass-ceramics.” Rapid Prototyping Journal 17 (6): 424–428. doi:10.1108/13552541111184152.
   Web of Science ®Google Scholar
• Grady, Joseph E. 2015. “CMC Research at NASA Glenn in 2015: Recent Progress and Plans.” 39th Annual Conference on Composites: Materials and Structures.
   Google Scholar
• Griffin, E. Alair, Daniel R. Mumm, and David B. Marshall. 1996. “Rapid Prototyping OF Functional Ceramic Composites.” American Ceramic Society Bulletin 75 (7): 65–68.
   Web of Science ®Google Scholar
• Griffith, M. L., and J. W. Halloran. 1996. “Freeform Fabrication of Ceramics via Stereolithography.” Journal of the American Ceramic Society 79 (10): 2601–2608. doi: 10.1111/j.1151-2916.1996.tb09022.x
   Web of Science ®Google Scholar
• Guo, Shaowen, Guangyu Zhang, Libo Li, Wuyi Wang, and Xuezeng Zhao. 2009. “Effect of Materials and Modelling on the Design of the Space-based Lightweight Mirror.” Materials & Design 30 (1): 9–14. doi:10.1016/j.matdes.2008.04.056.
   Web of Science ®Google Scholar
• Gureev, D. M., R. V. Ruzhechko, and I. V. Shishkovskii. 2000. “Selective Laser Sintering of PZT Ceramic Powders.” Technical Physics Letters 26 (3): 262–264. doi: 10.1134/1.1262811
   Web of Science ®Google Scholar
• Han, Quanquan, Rossitza Setchi, Franck Lacan, Dongdong Gu, and Sam L. Evans. 2017. “Selective Laser Melting of Advanced Al–Al2O3 Nanocomposites: Simulation, Microstructure and Mechanical Properties.” Materials Science and Engineering: A 698: 162–173. doi:10.1016/j.msea.2017.05.061.
   Web of Science ®Google Scholar
• Karnik, S. R., V. N. Gaitonde, J. Campos Rubio, A. Esteves Correia, A. M. Abrão, and J. Paulo Davim. 2008. “Delamination Analysis in High Speed Drilling of Carbon Fiber Reinforced Plastics (CFRP) Using Artificial Neural Network Model.” Materials & Design 29 (9): 1768–1776. doi:10.1016/j.matdes.2008.03.014.
   Web of Science ®Google Scholar
• Klosterman, D., R. Chartoff, G. Graves, N. Osborne, and B. Priore. 1998. “Interfacial Characteristics of Composites Fabricated by Laminated Object Manufacturing.” Composites Part A: Applied Science and Manufacturing 29 (9–10): 1165–1174. doi:10.1016/S1359-835x(98)00088-8.
   Web of Science ®Google Scholar
• Klosterman, Donald A., Richard P. Chartoff, Nora R. Osborne, George A. Graves, Allan Lightman, Gyoowan Han, Akos Bezeredi, and Stan Rodrigues. 1999. “Development of a Curved Layer LOM Process for Monolithic Ceramics and Ceramic Matrix Composites.” Rapid Prototyping Journal 5 (2): 61–71. doi:10.1108/13552549910267362.
   Web of Science ®Google Scholar
• Kumar, S., and J. P. Kruth. 2010. “Composites by Rapid Prototyping Technology.” Materials & Design 31 (2): 850–856. doi:10.1016/j.matdes.2009.07.045.
   Web of Science ®Google Scholar
• Launey, M. E., E. Munch, D. H. Alsem, H. B. Barth, E. Saiz, A. P. Tomsia, and R. O. Ritchie. 2009. “Designing Highly Toughened Hybrid Composites Through Nature-inspired Hierarchical Complexity.” Acta Materialia 57 (10): 2919–2932. doi:10.1016/j.actamat.2009.03.003.
   Web of Science ®Google Scholar
• Lee, I. S. 1998. “Rapid full densification of Alumina-glass composites fabricated by a selective laser sintering process.” Journal of Materials Science Letters 17 (22): 1907–1911. doi:10.1023/A:1006600208059.
   Google Scholar
• Lee, Jung-Seob, Young-Joon Seol, Min Sung, Wonkyu Moon, Sung Won Kim, Jeong-Hoon Oh, and Dong-Woo Cho. 2016. “Development and Analysis of Three-dimensional (3D) Printed Biomimetic Ceramic.” International Journal of Precision Engineering and Manufacturing 17 (12): 1711–1719. doi:10.1007/s12541-016-0198-2.
   Web of Science ®Google Scholar
• Lewicki, J. P., J. N. Rodriguez, C. Zhu, M. A. Worsley, A. S. Wu, Y. Kanarska, J. D. Horn, et al. 2017. “3D-Printing of Meso-structurally Ordered Carbon fiber/Polymer composites with Unprecedented Orthotropic Physical Properties.” Scientific Reports 7: 43401. doi:10.1038/srep43401.
   PubMed Web of Science ®Google Scholar
• Lewis, J. A. 2006. “Direct Ink Writing of 3D Functional materials.” Advanced Functional Materials 16 (17): 2193–2204. doi: 10.1002/adfm.200600434
   Web of Science ®Google Scholar
• Li, Xiangming, Litong Zhang, Xiaowei Yin, Liyun Feng, and Quan Li. 2010. “Effect of Chemical Vapor Infiltration of SiC on the Mechanical and Electromagnetic Properties of Si3N4–SiC ceramic.” Scripta Materialia 63 (6): 657–660. doi:10.1016/j.scriptamat.2010.05.034.
   Web of Science ®Google Scholar
• Liu, Rong-Zhen, Peng Chen, Jia-Min Wu, Shuang Chen, An-Nan Chen, Jing-Yan Chen, Shan-Shan Liu, Yu-Sheng Shi, and Chen-Hui Li. 2018. “Effects of B4C Addition on the Microstructure and Properties of Porous Alumina Ceramics Fabricated by Direct Selective Laser Sintering.” Ceramics International 44 (16): 19678–19685. doi:10.1016/j.ceramint.2018.07.220.
   Web of Science ®Google Scholar
• Liu, Shichao, Feng Ye, Limeng Liu, and Qiang Liu. 2015. “Feasibility of Preparing of Silicon Nitride Ceramics Components by Aqueous Tape Casting in Combination with Laminated Object Manufacturing.” Materials & Design (1980–2015) 66: 331–335. doi:10.1016/j.matdes.2014.10.079.
   Web of Science ®Google Scholar
• Loeschau, W., R. Lenk, S. Scharek, M. Teichgraeber, S. Nowotny, and C. Richter. 2000. “Prototyping of Complex-shaped Parts and Tools of Si/SiC-ceramics by Selective Laser Sintering.” Industrial Ceramics 20 (2): 95–96.
   Google Scholar
• Lu, Z. L., F. Lu, J. W. Cao, and D. C. Li. 2014. “Manufacturing Properties of Turbine Blades of Carbon Fiber-reinforced SiC Composite Based on Stereolithography.” Materials and Manufacturing Processes 29 (2): 201–209. doi:10.1080/10426914.2013.872269.
   Web of Science ®Google Scholar
• Lu, Z. L., F. Lu, J. W. Cao, D. C. Li, Y. Y. Lian, K. Miao, and H. Jing. 2013. “Fabricating Hollow Turbine Blades Using Short Carbon Fiber-reinforced SiC Composite.” The International Journal of Advanced Manufacturing Technology 69 (1–4): 417–425. doi:10.1007/s00170-013-5049-z.
   Web of Science ®Google Scholar
• Lukaszewicz, Dirk H. J. A., Carwyn Ward, and Kevin D. Potter. 2012. “The Engineering Aspects of Automated Prepreg Layup: History, Present and Future.” Composites Part B: Engineering 43 (3): 997–1009. doi:10.1016/j.compositesb.2011.12.003.
   Web of Science ®Google Scholar
• Maleksaeedi, S., H. Eng, F. E. Wiria, T. M. H. Ha, and Z. He. 2014. “Property Enhancement of 3D-printed Alumina Ceramics Using Vacuum Infiltration.” Journal of Materials Processing Technology 214 (7): 1301–1306. doi:10.1016/j.jmatprotec.2014.01.019.
   Web of Science ®Google Scholar
• Mei, Hui, Yuekai Yan, Liping Feng, Konstantinos G. Dassios, Hui Zhang, and Laifei Cheng. 2018. “First Printing of Continuous Fibers into Ceramics.” Journal of the American Ceramic Society, doi:10.1111/jace.16234.
   Web of Science ®Google Scholar
• Melcher, R., S. Martins, N. Travitzky, and P. Greil. 2006. “Fabrication of Al2O3-based Composites by Indirect 3D-printing.” Materials Letters 60 (4): 572–575. doi:10.1016/j.matlet.2005.09.059.
   Web of Science ®Google Scholar
• Meteyer, Simon, Xin Xu, Nicolas Perry, and Yaoyao Fiona Zhao. 2014. “Energy and Material Flow Analysis of Binder-jetting Additive Manufacturing Processes.” Procedia CIRP 15: 19–25. doi:10.1016/j.procir.2014.06.030.
   Google Scholar
• Meyers, Sebastian, Lien De Leersnijder, Jef Vleugels, and Jean-Pierre Kruth. 2018. “Direct Laser Sintering of Reaction Bonded Silicon Carbide with Low Residual Silicon Content.” Journal of the European Ceramic Society 38 (11): 3709–3717. doi:10.1016/j.jeurceramsoc.2018.04.055.
   Web of Science ®Google Scholar
• Meza, L. R., S. Das, and J. R. Greer. 2014. “Strong, Lightweight, and Recoverable Three-dimensional Ceramic Nanolattices.” Science 345 (6202): 1322–1326. doi:10.1126/science.1255908.
   PubMed Web of Science ®Google Scholar
• Minas, C., D. Carnelli, E. Tervoort, and A. R. Studart. 2016. “3D Printing of Emulsions and Foams into Hierarchical Porous Ceramics.” Advanced Materials 28 (45): 9993–9999. doi:10.1002/adma.201603390.
   PubMed Web of Science ®Google Scholar
• Misra, Ajay K, Joseph E Grady, and Robert Carter. 2015. “Additive Manufacturing of Aerospace Propulsion Components.” Additive Manufacturing Conference.
   Google Scholar
• Mitteramskogler, Gerald, Robert Gmeiner, Ruth Felzmann, Simon Gruber, Christoph Hofstetter, Jürgen Stampfl, Jörg Ebert, Wolfgang Wachter, and Jürgen Laubersheimer. 2014. “Light Curing Strategies for Lithography-based Additive Manufacturing of Customized Ceramics.” Additive Manufacturing 1–4: 110–118. doi:10.1016/j.addma.2014.08.003.
   Google Scholar
• Munch, E., M. E. Launey, D. H. Alsem, E. Saiz, A. P. Tomsia, and R. O. Ritchie. 2008. “Tough, Bio-inspired Hybrid Materials.” Science 322 (5907): 1516–1520. doi:10.1126/science.1164865.
   PubMed Web of Science ®Google Scholar
• Naglieri, Valentina, Bernd Gludovatz, Antoni P. Tomsia, and Robert O. Ritchie. 2015. “Developing Strength and Toughness in Bio-inspired Silicon Carbide hybrid Materials Containing a Compliant Phase.” Acta Materialia 98: 141–151. doi:10.1016/j.actamat.2015.07.022.
   Web of Science ®Google Scholar
• Nan, Beiya, Xiaowei Yin, Litong Zhang, and Laifei Cheng. 2011. “Three-dimensional Printing of Ti3SiC2-based Ceramics.” Journal of the American Ceramic Society 94 (4): 969–972. doi:10.1111/j.1551-2916.2010.04257.x.
   Web of Science ®Google Scholar
• Padture, N. P. 2016. “Advanced Structural Ceramics in Aerospace Propulsion.” Nature Materials 15 (8): 804–809. doi:10.1038/nmat4687.
   PubMed Web of Science ®Google Scholar
• Park, Joon-Soo, Hiroshi Nishimura, Daisuke Hayasaka, Ju-Hyeon Yu, Hirotatsu Kishimoto, and Akira Kohyama. 2016. “Fabrication of Short SiC Fiber Reinforced SiC Matrix Composites with High Fiber Volume Fraction.” Fusion Engineering and Design 109–111: 1174–1178. doi:10.1016/j.fusengdes.2015.12.060.
   Web of Science ®Google Scholar
• Peng, Jiong, Tung Liang Lin, and Paul Calvert. 1999. “Orientation Effects in Freeformed Short-fiber Composites.” Composites Part A: Applied Science and Manufacturing 30 (2): 133–138. doi: 10.1016/S1359-835X(98)00110-9
   Web of Science ®Google Scholar
• Picha, Kyle, Clayson Spackman, and Johnson Samuel. 2016. “Droplet Spreading Characteristics Observed During 3D Printing of Aligned Fiber-reinforced Soft Composites.” Additive Manufacturing 12: 121–131. doi:10.1016/j.addma.2016.08.004.
   Web of Science ®Google Scholar
• Rambo, C. R., N. Travitzky, K. Zimmermann, and P. Greil. 2005. “Synthesis of TiC/Ti–Cu Composites by Pressureless Reactive Infiltration of TiCu Alloy into Carbon Preforms Fabricated by 3D-printing.” Materials Letters 59 (8–9): 1028–1031. doi:10.1016/j.matlet.2004.11.051.
   Web of Science ®Google Scholar
• Rodrigues, Stanley John. 2000. “Solid Freeform Fabrication of Functional Silicon Nitride Ceramics using Laminated Object Manufacturing.
   Google Scholar
• Sachs, Emanuel M., John S. Haggerty, Michael J. Cima, and Paul A. Williams. 1995. Three-dimensional Printing Techniques.
   Google Scholar
• Saucedo-Mora, L., T. Lowe, S. Zhao, P. D. Lee, P. M. Mummery, and T. J. Marrow. 2016. “In situ Observation of Mechanical Damage Within a SiC–SiC Ceramic Matrix Composite.” Journal of Nuclear Materials 481: 13–23. doi:10.1016/j.jnucmat.2016.09.007.
   Web of Science ®Google Scholar
• Singh, Mrityunjay, Michael C. Halbig, and Joseph E. Grady. 2015. “Additive Manufacturing of Light Weight Ceramic Matrix Composites for Gas Turbine Engine Applications.” In Advanced processing and manufacturing technologies for Nanostructured and Multifunctional materials II, 145–150. Hoboken, NJ: Wiley.
   Google Scholar
• Smay, J. E., J. Cesarano, and J. A. Lewis. 2002. “Colloidal Inks for Directed assembly of 3-D Periodic Structures.” Langmuir 18 (14): 5429–5437. doi: 10.1021/la0257135
   Web of Science ®Google Scholar
• Smay, J. E., G. M. Gratson, R. F. Shepherd, J. Cesarano Iii, and J. A. Lewis. 2002. Directed Colloidal Assembly of 3D Periodic Structures.
   Google Scholar
• Stevinson, B., D. L. Bourell, and J. J. Beaman. 2008. “Over-infiltration Mechanisms in Selective Laser Sintered Si/SiC preforms.” Rapid Prototyping Journal 14 (3): 149–154. doi:10.1108/13552540810878003.
   Web of Science ®Google Scholar
• Streek, A, P Regenfuss, F Ullmann, L Hartwig, R Ebert, H Exner, and Fachbereich MPI Laserapplikationszentrum. 2006. “Processing of Silicon Carbide by Laser Micro Sintering.” Paper presented at the The Proceedings of the 17th Annual SFF Symposium.
   Google Scholar
• Thomas, Daniel J. 2017. “3-D Printing of Polymer-derived CMCs for Next-generation Turbine Blade Manufacture.” American Ceramic Society Bulletin.
   Google Scholar
• Tian, Xiaoyong, Tengfei Liu, Chuncheng Yang, Qingrui Wang, and Dichen Li. 2016. “Interface and Performance of 3D Printed Continuous Carbon Fiber Reinforced PLA Composites.” Composites Part A: Applied Science and Manufacturing 88: 198–205. doi:10.1016/j.compositesa.2016.05.032.
   Web of Science ®Google Scholar
• Travitzky, Nahum, Alexander Bonet, Benjamin Dermeik, Tobias Fey, Ina Filbert-Demut, Lorenz Schlier, Tobias Schlordt, and Peter Greil. 2014. “Additive Manufacturing of Ceramic-based Materials.” Advanced Engineering Materials 16 (6): 729–754. doi:10.1002/adem.201400097.
   Web of Science ®Google Scholar
• Vaidyanathan, R., C. Green, T. Phillips, R. Cipriani, S. Yarlagadda, W. J. Gillespie, M. Effinger, and K. C. Cooper. 2002. “Rapid Prototyping of Continuous Fiber Reinforced Ceramic Matrix Composites.” Program of Annual Meeting of Ksiam.
   Google Scholar
• Wang, J. C., H. Zheng, M. W. Chang, Z. Ahmad, and J. S. Li. 2017. “Preparation of Active 3D film Patches via Aligned Fiber Electrohydrodynamic (EHD) Printing.” Scientific Reports 7: 43924. doi:10.1038/srep43924.
   PubMed Web of Science ®Google Scholar
• Weisensel, L., N. Travitzky, H. Sieber, and P. Greil. 2004. “Laminated Object Manufacturing (LOM) of SiSiC Composites.” Advanced Engineering Materials 6 (11): 899–903. doi:10.1002/adem.200400112.
   Web of Science ®Google Scholar
• Windsheimer, H., N. Travitzky, A. Hofenauer, and P. Greil. 2007. “Laminated Object Manufacturing of Preceramic-paper-Derived Si–SiC Composites.” Advanced Materials 19 (24): 4515–4519. doi:10.1002/adma.200700789.
   Web of Science ®Google Scholar
• Wu, Haidong, Wei Liu, Rongxuan He, Ziwei Wu, Qiangguo Jiang, Xuan Song, Yong Chen, Lixia Cheng, and Shanghua Wu. 2017. “Fabrication of Dense Zirconia-toughened Alumina Ceramics Through a Stereolithography-based Additive Manufacturing.” Ceramics International 43 (1): 968–972. doi:10.1016/j.ceramint.2016.10.027.
   Web of Science ®Google Scholar
• Yao, Dongxu, Cynthia M. Gomes, Yu-Ping Zeng, Dongliang Jiang, Jens Günster, and Jürgen G. Heinrich. 2015. “Near Zero Shrinkage Porous Al2O3 Prepared via 3D-printing and Reaction Bonding.” Materials Letters 147: 116–118. doi:10.1016/j.matlet.2015.02.037.
   Web of Science ®Google Scholar
• Yao, Xinhua, Congcong Luan, Deming Zhang, Liujian Lan, and Jianzhong Fu. 2017. “Evaluation of Carbon Fiber-embedded 3D Printed Structures for Strengthening and Structural-health Monitoring.” Materials & Design 114: 424–432. doi:10.1016/j.matdes.2016.10.078.
   Web of Science ®Google Scholar
• Yi, Xu, Zhou-Jian Tan, Wan-Jing Yu, Jun Li, Bing-Ju Li, Bo-Yun Huang, and Jiqiao Liao. 2016. “Three Dimensional Printing of Carbon/carbon Composites by Selective Laser Sintering.” Carbon 96: 603–607. doi:10.1016/j.carbon.2015.09.110.
   Web of Science ®Google Scholar
• Yin, Xiaowei, Nahum Travitzky, and Peter Greil. 2007. “Three-dimensional Printing of Nanolaminated Ti3AlC2-toughened TiAl3–Al2O3Composites.” Journal of the American Ceramic Society 90 (7): 2128–2134. doi:10.1111/j.1551-2916.2007.01668.x.
   Web of Science ®Google Scholar
• Yunus, Doruk Erdem, Ran He, Wentao Shi, Orhan Kaya, and Yaling Liu. 2017. “Short Fiber Reinforced 3D Printed Ceramic Composite with Shear Induced Alignment.” Ceramics International, doi:10.1016/j.ceramint.2017.06.012.
   PubMed Web of Science ®Google Scholar
• Yunus, D. E., W. Shi, S. Sohrabi, and Y. Liu. 2016. “Shear Induced Alignment of Short Nanofibers in 3D Printed Polymer Composites.” Nanotechnology 27 (49): 495302. doi:10.1088/0957-4484/27/49/495302.
   PubMed Web of Science ®Google Scholar
• Zanchetta, E., M. Cattaldo, G. Franchin, M. Schwentenwein, J. Homa, G. Brusatin, and P. Colombo. 2016. “Stereolithography of SiOC Ceramic Microcomponents.” Advanced Materials 28 (2): 370–376. doi:10.1002/adma.201503470.
   PubMed Web of Science ®Google Scholar
• Zhou, Changcheng, Zhang Changrui, Hu Haifeng, Zhang Yudi, and Wang Zhiyi. 2008. “Preparation of 3D-Cf/SiC Composites at Low Temperatures.” Materials Science and Engineering: A 488 (1): 569–572. doi:10.1016/j.msea.2007.11.046.
   Web of Science ®Google Scholar
• Zhu, Wei, Hua Fu, Zhongfeng Xu, Rongzhen Liu, Ping Jiang, Xinyu Shao, Yusheng Shi, and Chunze Yan. 2018. “Fabrication and Characterization of Carbon Fiber Reinforced SiC Ceramic Matrix Composites based on 3D Printing Technology.” Journal of the European Ceramic Society 38 (14): 4604–4613. doi:10.1016/j.jeurceramsoc.2018.06.022.
   Web of Science ®Google Scholar
• Zhu, Shirley X., Halbig C. Michael, and Singh Mrityunjay. 2015. “Additive Manufacturing of Silicon Carbide-based Ceramics By 3-D Printing Technologies.” In Advanced Processing and Manufacturing Technologies for Nanostructured and Multifunctional Materials II, 133–144. Hoboken, NJ: Wiley.
   Google Scholar