Automatic determination of part build orientation for laser powder bed fusion

References

• Ahn, D., H. Kim, and S. Lee. 2007. “Fabrication Direction Optimization to Minimize Post-Machining in Layered Manufacturing.” International Journal of Machine Tools and Manufacture 47 (3-4): 593–606.
   Web of Science ®Google Scholar
• Ahsan, A. N., M. A. Habib, and B. Khoda. 2015. “Resource Based Process Planning for Additive Manufacturing.” Computer-Aided Design 69: 112–125.
   Web of Science ®Google Scholar
• Al-Ahmari, A. M., O. Abdulhameed, and A. A. Khan. 2018. “An Automatic and Optimal Selection of Parts Orientation in Additive Manufacturing.” Rapid Prototyping Journal 24 (4): 698–708.
   Web of Science ®Google Scholar
• Alexander, P., S. Allen, and D. Dutta. 1998. “Part Orientation and Build Cost Determination in Layered Manufacturing.” Computer-Aided Design 30 (5): 343–356.
   Web of Science ®Google Scholar
• Bartolomeu, F., S. Faria, O. Carvalho, E. Pinto, N. Alves, F. S. Silva, and G. Miranda. 2016. “Predictive Models for Physical and Mechanical Properties of Ti6Al4V Produced by Selective Laser Melting.” Materials Science and Engineering: A 663: 181–192.
   Web of Science ®Google Scholar
• Baumers, M., P. Dickens, C. Tuck, and R. Hague. 2016. “The Cost of Additive Manufacturing: Machine Productivity, Economies of Scale and Technology-push.” Technological Forecasting and Social Change 102: 193–201.
   Web of Science ®Google Scholar
• Brauers, W. K. M., E. K. Zavadskas, F. Peldschus, and Z. Turskis. 2008. “Multi-Objective Decision-making for Road Design.” Transport 23 (3): 183–193.
   Web of Science ®Google Scholar
• Brika, S. E., Y. F. Zhao, M. Brochu, and J. Mezzetta. 2017. “Multi-Objective Build Orientation Optimisation for Powder Bed Fusion by Laser.” Journal of Manufacturing Science and Engineering 139 (11): 111011.
   Web of Science ®Google Scholar
• Byun, H.-S., and K. H. Lee. 2006. “Determination of the Optimal Build Direction for Different Rapid Prototyping Processes Using Multi-criterion Decision Making.” Robotics and Computer-Integrated Manufacturing 22 (1): 69–80.
   Web of Science ®Google Scholar
• Calignano, F.. 2018. “Investigation of the Accuracy and Roughness in the Laser Powder Bed Fusion Process.” Virtual and Physical Prototyping 13 (2): 97–104.
   Web of Science ®Google Scholar
• Cheng, L., and A. To. 2019. “Part-scale Build Orientation Optimization for Minimizing Residual Stress and Support Volume for Metal Additive Manufacturing: Theory and Experimental Validation.” Computer-Aided Design 113: 1–23.
   Web of Science ®Google Scholar
• Chowdhury, S., K. Mhapsekar, and S. Anand. 2018. “Part Build Orientation Optimization and Neural Network-based Geometry Compensation for Additive Manufacturing Process.” Journal of Manufacturing Science and Engineering 140 (3): 031009.
   Web of Science ®Google Scholar
• Chua, C. K., and K. F. Leong. 2017. 3D Printing and Additive Manufacturing: Principles and Applications (The 5th Edition of Rapid Prototyping: Principles and Applications). Singapore: World Scientific Publishing.
   Google Scholar
• Delfs, P., M. Tows, and H.-J. Schmid. 2016. “Optimized Build Orientation of Additive Manufactured Parts for Improved Surface Quality and Build Time.” Additive Manufacturing 12: 314–320.
   Web of Science ®Google Scholar
• Di Angelo, L., P. Di Stefano, and E. Guardiani. 2020. “Search for the Optimal Build Direction in Additive Manufacturing Technologies: A Review.” Journal of Manufacturing and Materials Processing 4 (3): 71.
   Google Scholar
• Du, Z., H.-C. Chen, M. J. Tan, G. Bi, and C. K. Chua. 2018. “Investigation of Porosity Reduction, Microstructure and Mechanical Properties for Joining of Selective Laser Melting Fabricated Aluminium Composite Via Friction Stir Welding.” Journal of Manufacturing Processes 36: 33–43.
   Web of Science ®Google Scholar
• Du, Z., H.-C. Chen, M. J. Tan, G. Bi, and C. K. Chua. 2020. “Effect of nAl2O3 on the Part Density and Microstructure During the Laser-based Powder Bed Fusion of AlSi10Mg Composite.” Rapid Prototyping Journal 26 (4): 727–735.
   Web of Science ®Google Scholar
• Edwards, P., and M. Ramulu. 2014. “Fatigue Performance Evaluation of Selective Laser Melted Ti–6Al–4V.” Materials Science and Engineering: A 598: 327–337.
   Web of Science ®Google Scholar
• Gao, W., Y. Zhang, D. Ramanujan, K. Ramani, Y. Chen, C. B. Williams, C. C. Wang, Y. C. Shin, S. Zhang, and P. D. Zavattieri. 2015. “The Status, Challenges, and Future of Additive Manufacturing in Engineering.” Computer-Aided Design 69: 65–89.
   Web of Science ®Google Scholar
• Gibson, I., D. Rosen, and B. Stucker. 2015. Additive Manufacturing Technologies: 3D Printing, Rapid Prototyping, and Direct Digital Manufacturing. 2nd ed. New York: Springer-Verlag.
   Google Scholar
• Golmohammadi, A. H., and S. Khodaygan. 2019. “A Framework for Multi-objective Optimisation of 3D Part-build Orientation with a Desired Angular Resolution in Additive Manufacturing Processes.” Virtual and Physical Prototyping 14 (1): 19–36.
   Web of Science ®Google Scholar
• Griffiths, V., J. P. Scanlan, M. H. Eres, A. Martinez-Sykora, and P. Chinchapatnam. 2019. “Cost-driven Build Orientation and Bin Packing of Parts in Selective Laser Melting (SLM).” European Journal of Operational Research 273 (1): 334–352.
   Web of Science ®Google Scholar
• Huang, S., S. L. Sing, G. Delooze, R. Wilson, and W. Y. Yeong. 2020. “Laser Powder Bed Fusion of Titanium-tantalum Alloys: Compositions and Designs for Biomedical Applications.” Journal of the Mechanical Behavior of Biomedical Materials 108: 103775.
   PubMed Web of Science ®Google Scholar
• Hur, S.-M., K.-H. Choi, S.-H. Lee, and P.-K. Chang. 2001. “Determination of Fabricating Orientation and Packing in SLS Process.” Journal of Materials Processing Technology 112 (2-3): 236–243.
   Web of Science ®Google Scholar
• ISO 17296-2. 2015. Additive manufacturing–General principles–Part 2: Overview of process categories and feedstock. International Organization for Standardization.
   Google Scholar
• ISO4287. 1997. Geometrical Product Specifications (GPS)–Surface texture: Profile method–Terms, definitions and surface texture parameters. International Organization for Standardization.
   Google Scholar
• ISO/ASTM 52900. 2015. Additive manufacturing–General principles–Terminology. International Organization for Standardization.
   Google Scholar
• Jiang, J.. 2020. “A Novel Fabrication Strategy for Additive Manufacturing Processes.” Journal of Cleaner Production 272: 122916.
   Web of Science ®Google Scholar
• Jiang, J., and Y. Ma. 2020. “Path Planning Strategies to Optimize Accuracy, Quality, Build Time and Material Use in Additive Manufacturing: A Review.” Micromachines 11 (7): 633.
   PubMed Web of Science ®Google Scholar
• Jiang, J., X. Xu, and J. Stringer. 2018. “Support Structures for Additive Manufacturing: A Review.” Journal of Manufacturing and Materials Processing 2 (4): 64.
   Google Scholar
• Jiang, J., X. Xu, and J. Stringer. 2019a. “Optimisation of Multi-part Production in Additive Manufacturing for Reducing Support Waste.” Virtual and Physical Prototyping 14 (3): 219–228.
   Web of Science ®Google Scholar
• Jiang, J., X. Xu, and J. Stringer. 2019b. “Optimization of Process Planning for Reducing Material Waste in Extrusion Based Additive Manufacturing.” Robotics and Computer-Integrated Manufacturing 59: 317–325.
   Web of Science ®Google Scholar
• Jiang, J., X. Xu, Y. Xiong, Y. Tang, G. Dong, and S. Kim. 2020. “A Novel Strategy for Multi-part Production in Additive Manufacturing.” International Journal of Advanced Manufacturing Technology 109 (5): 1237–1248.
   Web of Science ®Google Scholar
• Kim, D. B., P. Witherell, R. Lipman, and S. C. Feng. 2015. “Streamlining the Additive Manufacturing Digital Spectrum: A Systems Approach.” Additive Manufacturing 5: 20–30.
   Web of Science ®Google Scholar
• Kulkarni, P., A. Marsan, and D. Dutta. 2000. “A Review of Process Planning Techniques in Layered Manufacturing.” Rapid Prototyping Journal 6 (1): 18–35.
   Web of Science ®Google Scholar
• Kuo, C. N., C. K. Chua, P. C. Peng, Y. W. Chen, S. L. Sing, S. Huang, and Y. L. Su. 2020. “Microstructure Evolution and Mechanical Property Response Via 3D Printing Parameter Development of Al–Sc Alloy.” Virtual and Physical Prototyping 15 (1): 120–129.
   Web of Science ®Google Scholar
• Lan, P.-T., S.-Y. Chou, L.-L. Chen, and D. Gemmill. 1997. “Determining Fabrication Orientations for Rapid Prototyping with Stereolithography Apparatus.” Computer-Aided Design 29 (1): 53–62.
   Web of Science ®Google Scholar
• Li, P., D. H. Warner, J. W. Pegues, M. D. Roach, N. Shamsaei, and N. Phan. 2019. “Towards Predicting Differences in Fatigue Performance of Laser Powder Bed Fused Ti-6Al-4V Coupons From the Same Build.” International Journal of Fatigue 126: 284–296.
   Web of Science ®Google Scholar
• Li, X., Y. H. Tan, P. Wang, X. Su, H. J. Willy, T. S. Herng, and J. Ding. 2020. “Metallic Microlattice and Epoxy Interpenetrating Phase Composites: Experimental and Simulation Studies on Superior Mechanical Properties and Their Mechanisms.” Composites Part A: Applied Science and Manufacturing 135: 105934.
   Web of Science ®Google Scholar
• Li, Y., K. Zhou, P. Tan, S. B. Tor, C. K. Chua, and K. F. Leong. 2018. “Modeling Temperature and Residual Stress Fields in Selective Laser Melting.” International Journal of Mechanical Sciences 136: 24–35.
   Web of Science ®Google Scholar
• Luo, N., and Q. Wang. 2016. “Fast Slicing Orientation Determining and Optimizing Algorithm for Least Volumetric Error in Rapid Prototyping.” International Journal of Advanced Manufacturing Technology 83 (5-8): 1297–1313.
   Web of Science ®Google Scholar
• Masood, S. H., W. Rattanawong, and P. Iovenitti. 2003. “A Generic Algorithm for a Best Part Orientation System for Complex Parts in Rapid Prototyping.” Journal of Materials Processing Technology 139 (1-3): 110–116.
   Web of Science ®Google Scholar
• Mukherjee, T., W. Zhang, and T. DebRoy. 2017. “An Improved Prediction of Residual Stresses and Distortion in Additive Manufacturing.” Computational Materials Science 126: 360–372.
   Web of Science ®Google Scholar
• Newman, S. T., Z. Zhu, V. Dhokia, and A. Shokrani. 2015. “Process Planning for Additive and Subtractive Manufacturing Technologies.” CIRP Annals 64 (1): 467–470.
   Web of Science ®Google Scholar
• Padhye, N., and K. Deb. 2011. “Multi-objective Optimisation and Multi-criteria Decision Making in SLS Using Evolutionary Approaches.” Rapid Prototyping Journal 17 (6): 458–478.
   Web of Science ®Google Scholar
• Paul, R., and S. Anand. 2015. “Optimization of Layered Manufacturing Process for Reducing Form Errors with Minimal Support Structures.” Journal of Manufacturing Systems 36: 231–243.
   Web of Science ®Google Scholar
• Pham, M. T., S. H. Yeo, T. J. Teo, P. Wang, and M. L. S. Nai. 2019. “Design and Optimization of a Three Degrees-of-freedom Spatial Motion Compliant Parallel Mechanism with Fully Decoupled Motion Characteristics.” Journal of Mechanisms and Robotics 11 (5): 051010.
   Google Scholar
• Qin, Y., Q. Qi, P. J. Scott, and X. Jiang. 2019a. “Determination of Optimal Build Orientation for Additive Manufacturing Using Muirhead Mean and Prioritised Average Operators.” Journal of Intelligent Manufacturing 30 (8): 3015–3034.
   Web of Science ®Google Scholar
• Qin, Y., Q. Qi, P. J. Scott, and X. Jiang. 2019b. “Status, Comparison, and Future of the Representations of Additive Manufacturing Data.” Computer-Aided Design 111: 44–64.
   Web of Science ®Google Scholar
• Qin, Y., Q. Qi, P. J. Scott, and X. Jiang. 2020a. “An Additive Manufacturing Process Selection Approach Based on Fuzzy Archimedean Weighted Power Bonferroni Aggregation Operators.” Robotics and Computer-Integrated Manufacturing 64: 101926.
   Web of Science ®Google Scholar
• Qin, Y., Q. Qi, P. Shi, P. J. Scott, and X. Jiang. 2020b. “Automatic Generation of Alternative Build Orientations for Laser Powder Bed Fusion Based on Facet Clustering.” Virtual and Physical Prototyping 15 (3): 307–324.
   Web of Science ®Google Scholar
• Raju, M., M. K. Gupta, N. Bhanot, and V. S. Sharma. 2019. “A Hybrid PSO–BFO Evolutionary Algorithm for Optimization of Fused Deposition Modelling Process Parameters.” Journal of Intelligent Manufacturing 30 (7): 2743–2758.
   Web of Science ®Google Scholar
• Rosen, D.. 2014a. “Design for Additive Manufacturing: Past, Present, and Future Directions.” Journal of Mechanical Design 136 (9): 090301.
   Web of Science ®Google Scholar
• Rosen, D. W.. 2014b. “Research Supporting Principles for Design for Additive Manufacturing: This Paper Provides a Comprehensive Review on Current Design Principles and Strategies for AM.” Virtual and Physical Prototyping 9 (4): 225–232.
   Google Scholar
• Rosen, D. W., C. C. Seepersad, T. W. Simpson, and C. B. Williams. 2015. “Design for Additive Manufacturing: A Paradigm Shift in Design, Fabrication, and Qualification.” Journal of Mechanical Design 137 (11): 110301.
   Web of Science ®Google Scholar
• Ruffo, M., C. Tuck, and R. Hague. 2006. “Cost Estimation for Rapid Manufacturing-laser Sintering Production for Low to Medium Volumes.” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 220 (9): 1417–1427.
   Web of Science ®Google Scholar
• Saaty, T. L.. 1977. “A Scaling Method for Priorities in Hierarchical Structures.” Journal of Mathematical Psychology 15 (3): 234–281.
   Web of Science ®Google Scholar
• Shen, H., X. Ye, G. Xu, L. Zhang, J. Qian, and J. Fu. 2020. “3D Printing Build Orientation Optimization for Flexible Support Platform.” Rapid Prototyping Journal 26 (1): 59–72.
   Web of Science ®Google Scholar
• Shuai, C., W. Yang, Y. Yang, C. Gao, C. He, and H. Pan. 2019. “A Continuous Net-like Eutectic Structure Enhances the Corrosion Resistance of Mg Alloys.” International Journal of Bioprinting 5 (2): 207.
   PubMed Web of Science ®Google Scholar
• Sing, S. L., and W. Y. Yeong. 2020. “Laser Powder Bed Fusion for Metal Additive Manufacturing: Perspectives on Recent Developments.” Virtual and Physical Prototyping 15 (3): 359–370.
   Web of Science ®Google Scholar
• Strano, G., L. Hao, R. M. Everson, and K. E. Evans. 2013. “Surface Roughness Analysis, Modelling and Prediction in Selective Laser Melting.” Journal of Materials Processing Technology 213 (4): 589–597.
   Web of Science ®Google Scholar
• Tan, J. H. K., S. L. Sing, and W. Y. Yeong. 2020. “Microstructure Modelling for Metallic Additive Manufacturing: a Review.” Virtual and Physical Prototyping 15 (1): 87–105.
   Web of Science ®Google Scholar
• Tang, M., P. C. Pistorius, and J. L. Beuth. 2017. “Prediction of Lack-of-fusion Porosity for Powder Bed Fusion.” Additive Manufacturing 14: 39–48.
   Web of Science ®Google Scholar
• Thompson, M. K., G. Moroni, T. Vaneker, G. Fadel, R. I. Campbell, I. Gibson, A. Bernard, J. Schulz, P. Graf, Ahuja, B., et al.. 2016. “Design for Additive Manufacturing: Trends, Opportunities, Considerations, and Constraints.” CIRP Annals 65 (2): 737–760.
   Web of Science ®Google Scholar
• Thrimurthulu, K., P. M. Pandey, and N. V. Reddy. 2004. “Optimum Part Deposition Orientation in Fused Deposition Modeling.” International Journal of Machine Tools and Manufacture 44 (6): 585–594.
   Web of Science ®Google Scholar
• Ulu, E., N. Gecer Ulu, W. Hsiao, and S. Nelaturi. 2020. “Manufacturability Oriented Model Correction and Build Direction Optimization for Additive Manufacturing.” Journal of Mechanical Design 142 (6): 062001.
   Web of Science ®Google Scholar
• Vaneker, T., A. Bernard, G. Moroni, I. Gibson, and Y. Zhang. 2020. “Design for Additive Manufacturing: Framework and Methodology.” CIRP Annals 69 (2): 578–599.
   Web of Science ®Google Scholar
• Vastola, G., Q. X. Pei, and Y.-W. Zhang. 2018. “Predictive Model for Porosity in Powder-bed Fusion Additive Manufacturing At High Beam Energy Regime.” Additive Manufacturing 22: 817–822.
   Web of Science ®Google Scholar
• Wang, C., and X. Qian. 2020. “Simultaneous Optimization of Build Orientation and Topology for Additive Manufacturing.” Additive Manufacturing 34: 101246.
   Web of Science ®Google Scholar
• Wang, J., W. J. Wu, W. Jing, X. Tan, G. J. Bi, S. B. Tor, K. F. Leong, C. K. Chua, and E. Liu. 2019a. “Improvement of Densification and Microstructure of ASTM A131 EH36 Steel Samples Additively Manufactured Via Selective Laser Melting with Varying Laser Scanning Speed and Hatch Spacing.” Materials Science and Engineering: A 746: 300–313.
   Web of Science ®Google Scholar
• Wang, P., M. H. Goh, Q. Li, M. L. S. Nai, and J. Wei. 2020a. “Effect of Defects and Specimen Size with Rectangular Cross-section on the Tensile Properties of Additively Manufactured Components.” Virtual and Physical Prototyping 15 (3): 251–264.
   Web of Science ®Google Scholar
• Wang, P., P. Huang, F. L. Ng, W. J. Sin, S. Lu, M. L. S. Nai, Z. Dong, and J. Wei. 2019b. “Additively Manufactured CoCrFeNiMn High-entropy Alloy Via Pre-alloyed Powder.” Materials & Design 168: 107576.
   Web of Science ®Google Scholar
• Wang, P., X. Li, S. Luo, M. L. S. Nai, J. Ding, and J. Wei. 2021. “Additively Manufactured Heterogeneously Porous Metallic Bone with Biostructural Functions and Bone-like Mechanical Properties.” Journal of Materials Science & Technology 62: 173–179.
   Web of Science ®Google Scholar
• Wang, P., J. Song, M. L. S. Nai, and J. Wei. 2020b. “Experimental Analysis of Additively Manufactured Component and Design Guidelines for Lightweight Structures: A Case Study Using Electron Beam Melting.” Additive Manufacturing 33: 101088.
   Web of Science ®Google Scholar
• Wauthle, R., B. Vrancken, B. Beynaerts, K. Jorissen, J. Schrooten, J.-P. Kruth, and J. Van Humbeeck. 2015. “Effects of Build Orientation and Heat Treatment on the Microstructure and Mechanical Properties of Selective Laser Melted Ti6Al4V Lattice Structures.” Additive Manufacturing 5: 77–84.
   Web of Science ®Google Scholar
• West, A. P., S. P. Sambu, and D. W. Rosen. 2001. “A Process Planning Method for Improving Build Performance in Stereolithography.” Computer-Aided Design 33 (1): 65–79.
   Web of Science ®Google Scholar
• Williams, C. B., F. Mistree, and D. W. Rosen. 2011. “A Functional Classification Framework for the Conceptual Design of Additive Manufacturing Technologies.” Journal of Mechanical Design 133 (12): 121002.
   Web of Science ®Google Scholar
• Xu, F., H. Loh, and Y. Wong. 1999. “Considerations and Selection of Optimal Orientation for Different Rapid Prototyping Systems.” Rapid Prototyping Journal 5 (2): 54–60.
   Web of Science ®Google Scholar
• Yang, Y., G. Wang, H. Liang, C. Gao, S. Peng, L. Shen, and C. Shuai. 2019. “Additive Manufacturing of Bone Scaffolds.” International Journal of Bioprinting 5 (1): 148.
   PubMed Web of Science ®Google Scholar
• Yap, C. Y., C. K. Chua, and Z. L. Dong. 2016. “An Effective Analytical Model of Selective Laser Melting.” Virtual and Physical Prototyping 11 (1): 21–26.
   Web of Science ®Google Scholar
• Yu, W., S. L. Sing, C. K. Chua, and X. Tian. 2019a. “Influence of Re-melting on Surface Roughness and Porosity of AlSi10Mg Parts Fabricated by Selective Laser Melting.” Journal of Alloys and Compounds 792: 574–581.
   Web of Science ®Google Scholar
• Yu, W. H., S. L. Sing, C. K. Chua, C. -N. Kuo, and X. L. Tian. 2019b. “Particle-reinforced Metal Matrix Nanocomposites Fabricated by Selective Laser Melting: A State of the Art Review.” Progress in Materials Science 104: 330–379.
   Web of Science ®Google Scholar
• Zhang, J., and Y. Li. 2013. “A Unit Sphere Discretization and Search Approach to Optimize Building Direction with Minimized Volumetric Error for Rapid Prototyping.” International Journal of Advanced Manufacturing Technology 67 (1-4): 733–743.
   Web of Science ®Google Scholar
• Zhang, Y., A. Bernard, R. K. Gupta, and R. Harik. 2016. “Feature Based Building Orientation Optimization for Additive Manufacturing.” Rapid Prototyping Journal 22 (2): 358–376.
   Web of Science ®Google Scholar
• Zhang, Y., R. Harik, G. Fadel, and A. Bernard. 2019. “A Statistical Method for Build Orientation Determination in Additive Manufacturing.” Rapid Prototyping Journal 25 (1): 187–207.
   Web of Science ®Google Scholar
• Zhao, D., and W. Guo. 2020. “Shape and Performance Controlled Advanced Design for Additive Manufacturing: A Review of Slicing and Path Planning.” Journal of Manufacturing Science and Engineering 142 (1): 010801.
   Web of Science ®Google Scholar