Additively manufacturing-enabled hierarchical NiTi-based shape memory alloys with high strength and toughness

References

• Andani, M. T., S. Saedi, A. S. Turabi, M. R. Karamooz, C. Haberland, H. E. Karaca, and M. Elahinia. 2017. “Mechanical and Shape Memory Properties of Porous Ni50.1Ti49.9 Alloys Manufactured by Selective Laser Melting.” Journal of the Mechanical Behavior of Biomedical Materials 68: 224–231.
   PubMed Web of Science ®Google Scholar
• Andrews, E., W. Sanders, and L. J. Gibson. 1999. “Compressive and Tensile Behaviour of Aluminum Foams.” Materials Science and Engineering A 270: 113–124.
   Web of Science ®Google Scholar
• Bouville, F., E. Maire, S. Meille, B. Van de Moortèle, A. J. Stevenson, and S. Deville. 2014. “Strong, Tough and Stiff Bioinspired Ceramics from Brittle Constituents.” Nature Materials 13: 508–514.
   PubMed Web of Science ®Google Scholar
• Bunge, H. J. 1993. Texture Analysis in Materials Science. Mathematical Methods. Göttingen: Cuvillier Verlag.
   Google Scholar
• Bührig-Polaczek, A., C. Fleck, T. Speck, P. Schüler, S. F. Fischer, M. Caliaro, and M. Thielen. 2016. “Biomimetic Cellular Metals – Using Hierarchical Structuring for Energy Absorption.” Bioinspiration & Biomimetics 11: 045002.
   PubMed Web of Science ®Google Scholar
• Chuprina, V. G., and I. M. Shalya. 2002. “Reactions of TiNi with Oxygen.” Powder Metallurgy and Metal Ceramics 41: 85–89.
   Web of Science ®Google Scholar
• Cunningham, R., C. Zhao, N. Parab, C. Kantzos, J. Pauza, K. Fezzaa, T. Sun, and A. D. Rollett. 2019. “Keyhole Threshold and Morphology in Laser Melting Revealed by Ultrahigh-Speed X-Ray Imaging.” Science 363: 849–852.
   PubMed Web of Science ®Google Scholar
• Dadbakhsh, S., M. Speirs, J.-P. Kruth, and J. V. Humbeeck. 2015. “Influence of LPBF on Shape Memory and Compression Behaviour of NiTi Scaffolds.” CIRP Annals – Manufacturing Technology 64: 209–212.
   Web of Science ®Google Scholar
• Dadbakhsh, S., B. Vrancken, J.-P. Kruth, J. Luyten, and J. V. Humbeeck. 2016. “Texture and Anisotropy in Selective Laser Melting of NiTi Alloy.” Materials Science & Engineering A 650: 225–232.
   Web of Science ®Google Scholar
• Du, L., D. D. Gu, D. H. Dai, Q. M. Shi, C. L. Ma, and M. J. Xia. 2018. “Relation of Thermal Behavior and Microstructure Evolution During Multi-Track Laser Melting Deposition of Ni-Based Material.” Optics & Laser Technology 108: 207–217.
   Web of Science ®Google Scholar
• Elahinia, M. H., M. Hashemi, M. Tabesh, and S. B. Bhaduri. 2012. “Manufacturing and Processing of NiTi Implants: a Review.” Progress in Material Science 57: 911–946.
   Web of Science ®Google Scholar
• Elahinia, M., N. S. Moghaddam, M. T. Andani, A. Amerinatanzi, B. A. Bimber, and R. F. Hamilton. 2016. “Fabrication of NiTi Through Additive Manufacturing: A Review.” Progress in Materials Science 83: 630–663.
   Web of Science ®Google Scholar
• Fan, Q. C., Y. H. Zhang, Y. Y. Wang, M. Y. Sun, Y. T. Meng, S. K. Huang, and Y. H. Wen. 2017. “Influences of Transformation Behavior and Precipitates on the Deformation Behavior of Ni-Rich NiTi Alloys.” Materials Science and Engineering: A 700: 269–280.
   Web of Science ®Google Scholar
• Farvizi, M., M. R. Akbarpour, D.-H. Ahn, and H. S. Kim. 2016. “Compressive Behavior of NiTi-Based Composites Reinforced with Alumina Nanoparticles.” Journal of Alloys and Compounds 688: 803–807.
   Web of Science ®Google Scholar
• Finlay, W. L., and J. A. Snyder. 1950. “Effects of Three Interstitial Solutes (Nitrogen, Oxygen, and Carbon) on the Mechanical Properties of High-Purity, Alpha Titanium.” Transactions AIME- Journal of Metals 188: 277–286.
   Google Scholar
• Franco, B. E., J. Ma, B. Loveall, G. A. Tapia, K. Karayagiz, J. Liu, A. Elwany, R. Arroyave, and I. Karaman. 2017. “A Sensory Material Approach for Reducing Variability in Additively Manufactured Metal Parts.” Scientific Reports 7: 3604.
   PubMed Web of Science ®Google Scholar
• Frenzel, J., E. P. George, A. Dlouhy, C. Somsen, M. F.-X. Wagner, and G. Eggeler. 2010. “Influence of Ni on Martensitic Phase Transformations in NiTi Shape Memory Alloys.” Acta Materialia 58: 3444–3458.
   Web of Science ®Google Scholar
• Gu, D., H. Chen, D. Dai, C. Ma, H. Zhang, K. Lin, L. Xi, et al. 2020. “Carbon Nanotubes Enabled Laser 3D Printing of High-Performance Titanium with Highly Concentrated Reinforcement.” IScience 23: 101498.
   PubMed Web of Science ®Google Scholar
• Gu, D. D., and B. B. He. 2016. “Finite Element Simulation and Experimental Investigation of Residual Stresses in Selective Laser Melted Ti-Ni Shape Memory Alloy.” Computational Materials Science 117: 221–232.
   Web of Science ®Google Scholar
• Han, C., Q. Fang, Y. Shi, S. B. Tor, C. K. Chua, and K. Zhou. 2020. “Recent Advances on High-Entropy Alloys for 3D Printing.” Advanced Materials 32: 1903855.
   PubMed Web of Science ®Google Scholar
• He, M. Y., and J. W. Hutchinson. 1989. “Crack Deflection at an Interface Between Dissimilar Elastic Materials.” International Journal of Solids and Structures 25: 1053–1067.
   Web of Science ®Google Scholar
• Hou, H., E. Simsek, T. Ma, N. S. Johnson, S. Qian, C. Cissé, D. Stasak, et al. 2019. “Fatigue-Resistant High-Performance Elastocaloric Materials Via Additive Manufacturing.” Science 366: 1116–1121.
   PubMed Web of Science ®Google Scholar
• Lei, Z., X. Liu, Y. Wu, H. Wang, S. Jiang, S. Wang, X. Hui, et al. 2018. “Enhanced Strength and Ductility in a High-Entropy Alloy Via Ordered Oxygen Complexes.” Nature 563: 546–550.
   PubMed Web of Science ®Google Scholar
• Lenau, T., and M. Barfoed. 2008. “Colours and Metallic Sheen in Beetle Shells – A Biomimetic Search for Material Structuring Principles Causing Light Interference.” Advanced Engineering Materials 10: 299–314.
   Web of Science ®Google Scholar
• Leung, C. L. A., S. Marussi, R. C. Atwood, M. Towrie, P. J. Withers, and P. D. Lee. 2018. “In Situ X-Ray Imaging of Defect and Molten Pool Dynamics in Laser Additive Manufacturing.” Nature Communications 9: 1355.
   PubMed Web of Science ®Google Scholar
• Li, S., H. Hassanin, M. M. Attallah, N. J. E. Adkins, and K. Essa. 2016. “The Development of TiNi-Based Negative Poisson’s Ratio Structure Using Selective Laser Melting.” Acta Materialia 105: 75–83.
   Web of Science ®Google Scholar
• Li, X., Z. Yang, and Z. Lu. 2019. “Design 3D Metamaterials with Compression-Induced-Twisting Characteristics Using Shear–Compression Coupling Effects.” Extreme Mechanics Letters 29: 100471.
   Web of Science ®Google Scholar
• Li, J., X. Zhou, M. Brochu, N. Provatas, and Y. F. Zhao. 2020. “Solidification Microstructure Simulation of Ti-6Al-4V in Metal Additive Manufacturing: A Review.” Additive Manufacturing 31: 100989.
   Web of Science ®Google Scholar
• Lin, X., T. M. Yue, H. O. Yang, and W. D. Huang. 2006. “Microstructure and Phase Evolution in Laser Rapid Forming of a Functionally Graded Ti–Rene88DT Alloy.” Acta Materialia 54: 1901.
   Web of Science ®Google Scholar
• Lu, B., X. Cui, W. Ma, M. Dong, Y. Fang, X. Wen, G. Jin, and D. Zeng. 2020. “Promoting the Heterogeneous Nucleation and the Functional Properties of Directed Energy Deposited NiTi Alloy by Addition of La2O3.” Additive Manufacturing 33: 101150.
   Web of Science ®Google Scholar
• Ma, J., B. Franco, G. Tapia, K. Karayagiz, L. Johnson, J. Liu, R. Arroyave, I. Karaman, and A. Elwany. 2017. “Spatial Control of Functional Response in 4D-Printed Active Metallic Structures.” Scientific Reports 7: 46707.
   PubMed Web of Science ®Google Scholar
• Ma, C., D. Gu, D. Dai, M. Xia, and H. Chen. 2018a. “Selective Growth of Ni4Ti3 Precipitate Variants Induced by Complicated Cyclic Stress During Laser Additive Manufacturing of NiTi-Based Composites.” Materials Characterization 143: 191–196.
   Web of Science ®Google Scholar
• Ma, C. L., D. D. Gu, D. H. Dai, H. M. Zhang, L. Du, and H. Zhang. 2018b. “Development of Interfacial Stress During Selective Laser Melting of TiC Reinforced TiAl Composites: Influence of Geometric Feature of Reinforcement.” Materials & Design 157: 1–11.
   Web of Science ®Google Scholar
• Ma, C., D. Gu, K. Lin, D. Dai, M. Xia, J. Yang, and H. Wang. 2019. “Selective Laser Melting Additive Manufacturing of Cancer Pagurus’s Claw Inspired Bionic Structures with High Strength and Toughness.” Applied Surface Science 469: 647–656.
   Web of Science ®Google Scholar
• Mahmoudi, M., G. Tapia, B. Franco, J. Ma, R. Arroyave, I. Karaman, and A. Elwany. 2018. “On the Printability and Transformation Behavior of Nickel-Titanium Shape Memory Alloys Fabricated Using Laser Powder-bed Fusion Additive Manufacturing.” Journal of Manufacturing Processes 35: 672–680.
   Web of Science ®Google Scholar
• Mehrabi, R., M. T. Andani, M. Kadkhodaei, and M. Elahinia. 2015. “Experimental Study of NiTi Thin-Walled Tubes Under Uniaxial Tension, Torsion, Proportional and Non-Proportional Loadings.” Experimental Mechanics 55: 1151–1164.
   Web of Science ®Google Scholar
• Meisner, L. L., A. B. Markov, D. I. Proskurovsky, V. P. Rotshtein, G. E. Ozur, S. N. Meisne, E. V. Yakovlev, T. M. Poletika, S. L. Girsova, and V. O. Semin. 2016. “Effect of Inclusions on Cratering Behavior in TiNi Shape Memory Alloys Irradiated with a Low-Energy, High-Current Electron Beam.” Surface and Coatings Technology 302: 495–506.
   Web of Science ®Google Scholar
• Mitchell, A., U. Lafont, M. Hołyńska, and C. Semprimoschnig. 2018. “Additive Manufacturing – A Review of 4D Printing and Future Applications.” Additive Manufacturing 24: 606–626.
   Web of Science ®Google Scholar
• Nagarajan, R., and K. Chattopadhyay. 1994. “Intermetallic Ti2Ni/TiNi Nanocomposite by Rapid Solidification.” Acta Metallurgica et Materialia 42: 947–958.
   Google Scholar
• Naleway, S. E., M. M. Porter, J. McKittrick, and M. A. Meyers. 2015. “Structural Design Elements in Biological Materials: Application to Bioinspiration.” Advanced Materials 27: 5455–5476.
   PubMed Web of Science ®Google Scholar
• Nembach, E. 1983. “Precipitation Hardening Caused by a Difference in Shearing Modulus Between Particle and Matrix.” Physica Status Solidi 78: 571–581.
   Web of Science ®Google Scholar
• Olurin, O. B., N. A. Fleck, and M. F. Ashby. 2000. “Deformation and Fracture of Aluminium Foams.” Materials Science and Engineering A 291: 136–146.
   Web of Science ®Google Scholar
• Otsuka, K., and X. Ren. 2005. “Physical Metallurgy of Ti-Ni-Based Shape Memory Alloys.” Progress in Materials Science 50: 511–678.
   Web of Science ®Google Scholar
• Parab, N. D., C. Zhao, R. Cunningham, L. I. Escano, K. Fezzaa, W. Everhart, A. D. Rollett, L. Chen, and T. Sun. 2018. “Ultrafast X-Ray Imaging of Laser–Metal Additive Manufacturing Processes.” Journal of Synchrotron Radiation 25: 1467–1477.
   PubMed Web of Science ®Google Scholar
• Saedi, S., N. S. Moghaddam, A. Amerinatanzi, M. Elahinia, and H. E. Karaca. 2018. “On the Effects of Selective Laser Melting Process Parameters on Microstructure and Thermomechanical Response of Ni-Rich NiTi.” Acta Materialia 144: 552–560.
   Web of Science ®Google Scholar
• Saedi, S., A. S. Turabi, M. T. Andani, N. S. Moghaddam, M. Elahinia, and H. E. Karaca. 2017. “Texture, Aging, and Superelasticity of Selective Laser Melting Fabricated Ni-Rich NiTi Alloys.” Materials Science & Engineering A 686: 1–10.
   Web of Science ®Google Scholar
• Sam, J., B. Franco, J. Ma, I. Karaman, A. Elwany, and J. H. Mabe. 2018. “Tensile Actuation Response of Additively Manufactured Nickel-Titanium Shape Memory Alloys.” Scripta Materialia 146: 164–168.
   Web of Science ®Google Scholar
• Suksangpanya, N., N. A. Yaraghi, R. B. Pipes, D. Kisailus, and P. Zavattieri. 2018. “Crack Twisting and Toughening Strategies in Bouligand Architectures.” International Journal of Solids and Structures 150: 83–106.
   Web of Science ®Google Scholar
• Šittner, P., L. Heller, J. Pilch, C. Curfs, T. Alonso, and D. Favier. 2014. “Young’s Modulus of Austenite and Martensite Phases in Superelastic NiTi Wires.” Journal of Materials Engineering and Performance 23: 2303–2314.
   Web of Science ®Google Scholar
• Takeshita, H. T., H. Tanaka, N. Kuriyama, T. Sakai, I. Uehara, and M. Haruta. 2000. “Hydrogenation Characteristics of Ternary Alloys Containing Ti4Ni2X (X = O, N, C).” Journal of Alloys and Compounds 311: 188–193.
   Web of Science ®Google Scholar
• Taylor, S. L., A. J. Ibeh, A. E. Jakus, R. N. Shah, and D. C. Dunand. 2018. “NiTi-Nb Micro-Trusses Fabricated via Extrusion-Based 3D-Printing of Powders and Transient-Liquid-Phase Sintering.” Acta Biomaterialia 76: 359–370.
   PubMed Web of Science ®Google Scholar
• Toprek, D., J. Belosevic-Cavor, and V. Koteski. 2015. “Ab Initio Studies of the Structural, Elastic, Electronic and Thermal Properties of NiTi2 Intermetallic.” Journal of Physics and Chemistry of Solids 85: 197–205.
   Web of Science ®Google Scholar
• Toro, A., F. Zhou, M. H. Wu, W. V. Geertruyden, and W. Z. Misiolek. 2009. “Characterization of Non-Metallic Inclusions in Superelastic NiTi Tubes.” Journal of Materials Engineering and Performance 18: 448–458.
   Web of Science ®Google Scholar
• Vyatskikh, A., S. Delalande, A. Kudo, X. Zhang, C. M. Portela, and J. R. Greer. 2018. “Additive Manufacturing of 3D Nano-Architected Metals.” Nature Communications 9: 593.
   PubMed Web of Science ®Google Scholar
• Wang, X., M. Speirs, S. Kustov, B. Vrancken, X. Li, J.-P. Kruth, and J. V. Humbeeck. 2018a. “Selective Laser Melting Produced Layer-Structured NiTi Shape Memory Alloys with High Damping Properties and Elinvar Effect.” Scripta Materialia 146: 246–250.
   Web of Science ®Google Scholar
• Wang, Y. M., T. Voisin, J. T. McKeown, J. Ye, N. P. Calta, Z. Li, Z. Zeng, et al. 2018b. “Additively Manufactured Hierarchical Stainless Steels with High Strength and Ductility.” Nature Materials 17: 63.
   PubMed Web of Science ®Google Scholar
• Wang, X., J. Yu, J. Liu, L. Chen, Q. Yang, H. Wei, J. Sun, et al. 2020. “Effect of Process Parameters on the Phase Transformation Behavior and Tensile Properties of NiTi Shape Memory Alloys Fabricated by Selective Laser Melting.” Additive Manufacturing 36: 101545.
   Web of Science ®Google Scholar
• Weaver, J. C., G. W. Milliron, A. Miserez, K. Evans-Lutterodt, S. Herrera, I. Gallana, W. J. Mershon, et al. 2012. “The Stomatopod Dactyl Club: A Formidable Damage-Tolerant Biological Hammer.” Science 336: 1275–1281.
   PubMed Web of Science ®Google Scholar
• Zhang, J. X., M. Sato, and A. Ishida. 2003. “On the Ti2Ni Precipitates and Guinier–Preston Zones in Ti-Rich Ti–Ni Thin Films.” Acta Materialia 51: 3121–3130.
   Web of Science ®Google Scholar
• Zhao, C., K. Fezzaa, R. W. Cunningham, H. Wen, F. D. Carlo, L. Chen, A. D. Rollett, and T. Sun. 2017. “Real-Time Monitoring of Laser Powder Bed Fusion Process Using High-Speed X-Ray Imaging and Diffraction.” Scientific Reports 7: 3602.
   PubMed Web of Science ®Google Scholar
• Zhao, C., Q. Guo, X. Li, N. Parab, K. Fezzaa, W. Tan, L. Chen, and T. Sun. 2019. “Bulk-Explosion-Induced Metal Spattering During Laser Processing.” Physical Review X 9: 021052.
   Web of Science ®Google Scholar
• Zhao, C., N. D. Parab, X. Li, K. Fezzaa, W. Tan, A. D. Rollett, and T. Sun. 2020. “Critical Instability at Moving Keyhole Tip Generates Porosity in Laser Melting.” Science 370: 1080–1086.
   PubMed Web of Science ®Google Scholar
• Zheng, X., W. Smith, J. Jackson, B. Moran, H. Cui, D. Chen, J. Ye, et al. 2016. “Multiscale Metallic Metamaterials.” Nature Materials 15: 1100.
   PubMed Web of Science ®Google Scholar
• Zhou, Q., M. D. Hayat, G. Chen, S. Cai, X. Qu, H. Tang, and P. Cao. 2019. “Selective Electron Beam Melting of NiTi: Microstructure, Phase Transformation and Mechanical Properties.” Materials Science & Engineering A 744: 290–298.
   Web of Science ®Google Scholar
• Zhu, Z. G., X. H. An, W. J. Lu, Z. M. Li, F. L. Ng, X. Z. Liao, U. Ramamurty, S. M. L. Nai, and J. Wei. 2019. “Selective Laser Melting Enabling the Hierarchically Heterogeneous Microstructure and Excellent Mechanical Properties in an Interstitial Solute Strengthened High Entropy Alloy.” Materials Research Letters 7: 453–459.
   Web of Science ®Google Scholar
• Zhu, C., Z. Qi, V. A. Beck, M. Luneau, J. Lattimer, W. Chen, M. A. Worsley, J. C. Ye, E. B. Duoss, and C. M. Spadaccini. 2018. “Toward Digitally Controlled Catalyst Architectures: Hierarchical Nanoporous Gold via 3D Printing.” Science Advance 4: 9459–9490.
   Google Scholar
• Zimmermann, E. A., B. Gludovatz, E. Schaible, N. K. N. Dave, W. Yang, M. A. Meyers, and R. O. Ritchie. 2013. “Mechanical Adaptability of the Bouligand-Type Structure in Natural Dermal Armour.” Nature Communications 4: 2634.
   PubMed Web of Science ®Google Scholar