References
- Cai, Xingfang, Andrew Alexander Malcolm, Brian Stephen Wong, and Zheng Fan. 2015. “Measurement and Characterization of Porosity in Aluminium Selective Laser Melting Parts Using X-Ray CT.” Virtual and Physical Prototyping 10 (4): 195–206. doi:https://doi.org/10.1080/17452759.2015.1112412.
- Chen, Shengyang, Tae-Sik Jang, Houwen Matthew Pan, Hyun-Do Jung, Ming Wei Sia, Shuying Xie, Yao Hang, Mark Chong Seow Khoon, Dongan Wang, and Juha Song. 2020. “3D Freeform Printing of Nanocomposite Hydrogels Through in Situ Precipitation in Reactive Viscous Fluid.” International Journal of Bioprinting 6 (2): 21. doi:https://doi.org/10.18063/ijb.v6i2.258.
- Croteau, Joseph R., Seth Griffiths, Marta D. Rossell, Christian Leinenbach, Christoph Kenel, Vincent Jansen, David N. Seidman, David C. Dunand, and Nhon Q. Vo. 2018. “Microstructure and Mechanical Properties of Al-Mg-Zr Alloys Processed by Selective Laser Melting.” Acta Materialia 153: 35–44. doi:https://doi.org/10.1016/j.actamat.2018.04.053.
- DebRoy, T., H. L. Wei, J. S. Zuback, T. Mukherjee, J. W. Elmer, J. O. Milewski, A. M. Beese, A. Wilson-Heid, A. De, and W. Zhang. 2018. “Additive Manufacturing of Metallic Components – Process, Structure and Properties.” Progress in Materials Science 924: 112–224. doi:https://doi.org/10.1016/j.pmatsci.2017.10.001.
- Ding, Xueping, and Linzhi Wang. 2017. “Heat Transfer and Fluid Flow of Molten Pool During Selective Laser Melting of AlSi10Mg Powder: Simulation and Experiment.” Journal of Manufacturing Processes 26: 280–289. doi:https://doi.org/10.1016/j.jmapro.2017.02.009.
- Greco, Sebastian, Kevin Gutzeit, Hendrik Hotz, Benjamin Kirsch, and Jan C. Aurich. 2020. “Selective Laser Melting (SLM) of AISI 316L – Impact of Laser Power, Layer Thickness, and Hatch Spacing on Roughness, Density, and Microhardness at Constant Input Energy Density.” The International Journal of Advanced Manufacturing Technology 108 (5–6): 1551–1562. doi:https://doi.org/10.1007/s00170-020-05510-8.
- Heinz, A., A. Haszler, C. Keidel, S. Moldenhauer, R. Benedictus, and W. S. Miller. 2000. “Recent Development in Aluminium Alloys for Aerospace Applications.” Materials Science and Engineering: A 280 (1): 102–107. doi:https://doi.org/10.1016/S0921-5093(99)00674-7.
- Hu, Xiaowu, Fugang Jiang, Fanrong Ai, and Hong Yan. 2012. “Effects of Rare Earth Er Additions on Microstructure Development and Mechanical Properties of Die-Cast ADC12 Aluminum Alloy.” Journal of Alloys and Compounds 538: 21–27. doi:https://doi.org/10.1016/j.jallcom.2012.05.089.
- Hu, Zhiheng, Xiaojia Nie, Yang Qi, Hu Zhang, and Haihong Zhu. 2021. “Cracking Criterion for High Strength Al–Cu Alloys Fabricated by Selective Laser Melting.” Additive Manufacturing 37: 101709. doi:https://doi.org/10.1016/j.addma.2020.101709.
- Huang, Sheng, R. Lakshmi Narayan, Kuan Tan Joel Heang, Swee Leong Sing, and Wai Yee Yeong. 2021. “Resolving the Porosity-Unmelted Inclusion Dilemma During in-Situ Alloying of Ti34Nb via Laser Powder Bed Fusion.” Acta Materialia 204: 116522. doi:https://doi.org/10.1016/j.actamat.2020.116522.
- Jia, Qingbo, Paul Rometsch, Sheng Cao, Kai Zhang, Aijun Huang, and Xinhua Wu. 2018. “Characterisation of AlScZr and AlErZr Alloys Processed by Rapid Laser Melting.” Scripta Materialia 151: 42–46. doi:https://doi.org/10.1016/j.scriptamat.2018.03.035.
- Kaufmann, N., M. Imran, T. M. Wischeropp, C. Emmelmann, S. Siddique, and F. Walther. 2016. “Influence of Process Parameters on the Quality of Aluminium Alloy EN AW 7075 Using Selective Laser Melting (SLM).” Physics Procedia 83: 918–926. doi:https://doi.org/10.1016/j.phpro.2016.08.096.
- Kuo, C. N., C. K. Chua, P. C. Peng, Y. W. Chen, S. L. Sing, S. Huang, and Y. L. Su. 2020. “Microstructure Evolution and Mechanical Property Response via 3D Printing Parameter Development of Al–Sc Alloy.” Virtual and Physical Prototyping 15 (1): 120–129. doi:https://doi.org/10.1080/17452759.2019.1698967.
- Le, Trong-Nhan, and Lo Yu-Lung. 2019. “Effects of Sulfur Concentration and Marangoni Convection on Melt-Pool Formation in Transition Mode of Selective Laser Melting Process.” Materials & Design 179: 107866. doi:https://doi.org/10.1016/j.matdes.2019.107866.
- Lei, Zhenglong, Jiang Bi, Yanbin Chen, Xi Chen, Xikun Qin, and Ze Tian. 2019. “Effect of Energy Density on Formability, Microstructure and Micro-Hardness of Selective Laser Melted Sc- and Zr- Modified 7075 Aluminum Alloy.” Powder Technology 356: 594–606. doi:https://doi.org/10.1016/j.powtec.2019.08.082.
- Leung, Chu Lun Alex, Sebastian Marussi, Robert C. Atwood, Michael Towrie, Philip J. Withers, and Peter D. Lee. 2018. “In Situ X-Ray Imaging of Defect and Molten Pool Dynamics in Laser Additive Manufacturing.” Nature Communications 9 (1): 1355. doi:https://doi.org/10.1038/s41467-018-03734-7.
- Li, Ruidi, Minbo Wang, Zhiming Li, Peng Cao, Tiechui Yuan, and Hongbin Zhu. 2020. “Developing a High-Strength Al-Mg-Si-Sc-Zr Alloy for Selective Laser Melting: Crack-Inhibiting and Multiple Strengthening Mechanisms.” Acta Materialia 193: 83–98. doi:https://doi.org/10.1016/j.actamat.2020.03.060.
- Liu, Peng, Jia-ying Hu, Huai-xue Li, Si-yu Sun, and Yuan-bin Zhang. 2020. “Effect of Heat Treatment on Microstructure, Hardness and Corrosion Resistance of 7075 Al Alloys Fabricated by SLM.” Journal of Manufacturing Processes 60: 578–585. doi:https://doi.org/10.1016/j.jmapro.2020.10.071.
- Liu, Xuefeng, Ang Li, Baoqiang Yin, Bo Yu, and Yang Yan. 2018. “Influence Law of Process Parameters on the Continuity and Dimensional Uniformity of 7075 Aluminum Alloy Single Tracks Manufactured by Selective Laser Melting.” In Advances in Materials Processing, edited by Yafang Han, 243–255. Singapore: Springer. Lecture Notes in Mechanical Engineering. doi:https://doi.org/10.1007/978-981-13-0107-0_23.
- Martin, Aiden A., Nicholas P. Calta, Saad A. Khairallah, Jenny Wang, Phillip J. Depond, Anthony Y. Fong, Vivek Thampy, et al. 2019. “Dynamics of Pore Formation During Laser Powder Bed Fusion Additive Manufacturing.” Nature Communications 10 (1): 1987. doi:https://doi.org/10.1038/s41467-019-10009-2.
- Martin, John H., Brennan D. Yahata, Jacob M. Hundley, Justin A. Mayer, Tobias A. Schaedler, and Tresa M. Pollock. 2017. “3D Printing of High-Strength Aluminium Alloys.” Nature 549 (7672): 365–369. doi:https://doi.org/10.1038/nature23894.
- Martinez, Rafael, Iain Todd, and Kamran Mumtaz. 2019. “In Situ Alloying of Elemental Al-Cu12 Feedstock Using Selective Laser Melting.” Virtual and Physical Prototyping 14 (3): 242–252. doi:https://doi.org/10.1080/17452759.2019.1584402.
- Maskery, I., N. T. Aboulkhair, M. R. Corfield, C. Tuck, A. T. Clare, R. K. Leach, R. D. Wildman, I. A. Ashcroft, and R. J. M. Hague. 2016. “Quantification and Characterisation of Porosity in Selectively Laser Melted Al–Si10–Mg Using X-Ray Computed Tomography.” Materials Characterization 111: 193–204. doi:https://doi.org/10.1016/j.matchar.2015.12.001.
- Murr, Lawrence E., Sara M. Gaytan, Diana A. Ramirez, Edwin Martinez, Jennifer Hernandez, Krista N. Amato, Patrick W. Shindo, Francisco R. Medina, and Ryan B. Wicker. 2012. “Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies.” Journal of Materials Science & Technology 28 (1): 1–14. doi:https://doi.org/10.1016/S1005-0302(12)60016-4.
- Nadammal, Naresh, Tatiana Mishurova, Tobias Fritsch, Itziar Serrano-Munoz, Arne Kromm, Christoph Haberland, Pedro Dolabella Portella, and Giovanni Bruno. 2021. “Critical Role of Scan Strategies on the Development of Microstructure, Texture, and Residual Stresses During Laser Powder Bed Fusion Additive Manufacturing.” Additive Manufacturing 38: 101792. doi:https://doi.org/10.1016/j.addma.2020.101792.
- Okamoto, H. 2011. “Al-Er (Aluminum-Erbium).” Journal of Phase Equilibria and Diffusion 32 (3): 261–262. doi:https://doi.org/10.1007/s11669-011-9877-y.
- Otani, Yuki, and Shinya Sasaki. 2020. “Effects of the Addition of Silicon to 7075 Aluminum Alloy on Microstructure, Mechanical Properties, and Selective Laser Melting Processability.” Materials Science and Engineering: A 777: 139079. doi:https://doi.org/10.1016/j.msea.2020.139079.
- Prashanth, K. G., S. Scudino, H. J. Klauss, K. B. Surreddi, L. Löber, Z. Wang, A. K. Chaubey, U. Kühn, and J. Eckert. 2014. “Microstructure and Mechanical Properties of Al–12Si Produced by Selective Laser Melting: Effect of Heat Treatment.” Materials Science and Engineering: A 590: 153–160. doi:https://doi.org/10.1016/j.msea.2013.10.023.
- Qbau, N., N. D. Nam, N. X. Ca, and N. T. Hien. 2020. “The Crack Healing Effect of Scandium in Aluminum Alloys During Laser Additive Manufacturing.” Journal of Manufacturing Processes 50: 241–246. doi:https://doi.org/10.1016/j.jmapro.2019.12.050.
- Qi, Ting, Haihong Zhu, Hu Zhang, Jie Yin, Linda Ke, and Xiaoyan Zeng. 2017. “Selective Laser Melting of Al7050 Powder: Melting Mode Transition and Comparison of the Characteristics Between the Keyhole and Conduction Mode.” Materials & Design 135: 257–266. doi:https://doi.org/10.1016/j.matdes.2017.09.014.
- Rodriguez-Salvador, Marisela, and Laura Ruiz-Cantu. 2019. “Revealing Emerging Science and Technology Research for Dentistry Applications of 3D Bioprinting.” International Journal of Bioprinting 5: 1. doi:https://doi.org/10.18063/ijb.v5i1.170.
- Salmi, Alessandro, and Eleonora Atzeni. 2020. “Residual Stress Analysis of Thin AlSi10Mg Parts Produced by Laser Powder Bed Fusion.” Virtual and Physical Prototyping 15 (1): 49–61. doi:https://doi.org/10.1080/17452759.2019.1650237.
- Shuai, Cijun, Wenjing Yang, Youwen Yang, Chengde Gao, Chongxian He, and Hao Pan. 2019. “A Continuous Net-Like Eutectic Structure Enhances the Corrosion Resistance of Mg Alloys.” International Journal of Bioprinting 5 (2): 49. doi:https://doi.org/10.18063/ijb.v5i2.207.
- Sing, S. L., S. Huang, G. D. Goh, G. L. Goh, C. F. Tey, J. H. K. Tan, and W. Y. Yeong. 2021a. “Emerging Metallic Systems for Additive Manufacturing: In-Situ Alloying and Multi-Metal Processing in Laser Powder Bed Fusion.” Progress in Materials Science 119: 100795. doi:https://doi.org/10.1016/j.pmatsci.2021.100795.
- Sing, S. L., C. N. Kuo, C. T. Shih, C. C. Ho, and C. K. Chua. 2021b. “Perspectives of Using Machine Learning in Laser Powder Bed Fusion for Metal Additive Manufacturing.” Virtual and Physical Prototyping 16 (3): 372–386. doi:https://doi.org/10.1080/17452759.2021.1944229.
- Stojanovic, Blaza, Bukvic Мilan, and Igor Epler. 2018. “Application of Aluminum and Aluminum Alloys in Engineering.” Applied Engineering Letters: Journal of Engineering and Applied Sciences 3 (2): 52–62. doi:https://doi.org/10.18485/aeletters.2018.3.2.2.
- Tan, Qiyang, Zhiqi Fan, Xiaoqin Tang, Yu Yin, Gan Li, Danni Huang, Jingqi Zhang, et al. 2021. “A Novel Strategy to Additively Manufacture 7075 Aluminium Alloy with Selective Laser Melting.” Materials Science and Engineering: A 821: 141638. doi:https://doi.org/10.1016/j.msea.2021.141638.
- Tan, Qiyang, Jingqi Zhang, Ning Mo, Zhiqi Fan, Yu Yin, Michael Bermingham, Yingang Liu, Han Huang, and Ming-Xing Zhang. 2020. “A Novel Method to 3D-Print Fine-Grained AlSi10Mg Alloy with Isotropic Properties via Inoculation with LaB6 Nanoparticles.” Additive Manufacturing 32: 101034. doi:https://doi.org/10.1016/j.addma.2019.101034.
- Trevisan, Francesco, Flaviana Calignano, Massimo Lorusso, Jukka Pakkanen, Alberta Aversa, Elisa Ambrosio, Mariangela Lombardi, Paolo Fino, and Diego Manfredi. 2017. “On the Selective Laser Melting (SLM) of the AlSi10Mg Alloy: Process, Microstructure, and Mechanical Properties.” Materials 10 (1): 76. doi:https://doi.org/10.3390/ma10010076.
- van Dalen, Marsha E., Richard A. Karnesky, Joseph R. Cabotaje, David C. Dunand, and David N. Seidman. 2009. “Erbium and Ytterbium Solubilities and Diffusivities in Aluminum as Determined by Nanoscale Characterization of Precipitates.” Acta Materialia 57 (14): 4081–4089. doi:https://doi.org/10.1016/j.actamat.2009.05.007.
- Wang, Jinlian, Jun Xu, and Feng Pan. 2018. “Effect of Annealing on Microstructure and Properties of Er Modified 5052 Alloy.” Results in Physics 10: 476–480. doi:https://doi.org/10.1016/j.rinp.2018.06.048.
- Weingarten, Christian, Damien Buchbinder, Norbert Pirch, Wilhelm Meiners, Konrad Wissenbach, and Reinhart Poprawe. 2015. “Formation and Reduction of Hydrogen Porosity During Selective Laser Melting of AlSi10Mg.” Journal of Materials Processing Technology 221: 112–120. doi:https://doi.org/10.1016/j.jmatprotec.2015.02.013.
- Wen, S. P., K. Y. Gao, Y. Li, H. Huang, and Z. R. Nie. 2011. “Synergetic Effect of Er and Zr on the Precipitation Hardening of Al–Er–Zr Alloy.” Scripta Materialia 65 (7): 592–595. doi:https://doi.org/10.1016/j.scriptamat.2011.06.033.
- Wen, S. P., Z. B. Xing, H. Huang, B. L. Li, W. Wang, and Z. R. Nie. 2009. “The Effect of Erbium on the Microstructure and Mechanical Properties of Al–Mg–Mn–Zr Alloy.” Materials Science and Engineering: A 516 (1–2): 42–49. doi:https://doi.org/10.1016/j.msea.2009.02.045.
- Wenhui, Yu, Swee Leong Sing, Chee Kai Chua, and Xuelei Tian. 2019. “Influence of Re-Melting on Surface Roughness and Porosity of AlSi10Mg Parts Fabricated by Selective Laser Melting.” Journal of Alloys and Compounds 792: 574–581. doi:https://doi.org/10.1016/j.jallcom.2019.04.017.
- Wu, Hong, Yaojia Ren, Junye Ren, Anhui Cai, Min Song, Yong Liu, Xiaolan Wu, et al. 2020. “Effect of Melting Modes on Microstructure and Tribological Properties of Selective Laser Melted AlSi10Mg Alloy.” Virtual and Physical Prototyping 15 (Suppl. 1): 570–582. doi:https://doi.org/10.1080/17452759.2020.1811932.
- Xing, Pengfei, Bo Gao, Yanxin Zhuang, Kaihua Liu, and Ganfeng Tu. 2010. “Effect of Erbium on Properties and Microstructure of Al-Si Eutectic Alloy.” Journal of Rare Earths 28 (6): 927–930. doi:https://doi.org/10.1016/S1002-0721(09)60222-2.
- Yang, Youwen, Guoyong Wang, Huixin Liang, Chengde Gao, Shuping Peng, Lida Shen, and Cijun Shuai. 2019. “Additive Manufacturing of Bone Scaffolds.” International Journal of Bioprinting 5: 1. doi:https://doi.org/10.18063/ijb.v5i1.148.
- Yu, W. H., S. L. Sing, C. K. Chua, C. N. Kuo, and X. L. Tian. 2019. “Particle-Reinforced Metal Matrix Nanocomposites Fabricated by Selective Laser Melting: A State of the Art Review.” Progress in Materials Science 104: 330–379. doi:https://doi.org/10.1016/j.pmatsci.2019.04.006.
- Zhang, Han, Dongdong Gu, Donghua Dai, Chenglong Ma, Yuxin Li, Ruolin Peng, Shuhui Li, Gang Liu, and Biqi Yang. 2020. “Influence of Scanning Strategy and Parameter on Microstructural Feature, Residual Stress and Performance of Sc and Zr Modified Al–Mg Alloy Produced by Selective Laser Melting.” Materials Science and Engineering: A 788: 139593. doi:https://doi.org/10.1016/j.msea.2020.139593.
- Zhang, Jinliang, Bo Song, Qingsong Wei, Dave Bourell, and Yusheng Shi. 2019. “A Review of Selective Laser Melting of Aluminum Alloys: Processing, Microstructure, Property and Developing Trends.” Journal of Materials Science & Technology 35 (2): 270–284. doi:https://doi.org/10.1016/j.jmst.2018.09.004.
- Zhao, Yufan, Kenta Aoyagi, Kenta Yamanaka, and Akihiko Chiba. 2020. “Role of Operating and Environmental Conditions in Determining Molten Pool Dynamics During Electron Beam Melting and Selective Laser Melting.” Additive Manufacturing 36: 101559. doi:https://doi.org/10.1016/j.addma.2020.101559.
- Zolfagharian, Ali, Martin Denk, Abbas Z. Kouzani, Bodaghi Bodaghi, Saeid Nahavandi, and Akif Kaynak. 2020. “Effects of Topology Optimization in Multimaterial 3D Bioprinting of Soft Actuators.” International Journal of Bioprinting 6: 2. doi:https://doi.org/10.18063/ijb.v6i2.260.