References
- Anderson, R., J. Terrell, J. Schneider, S. Thompson, and P. Gradl. 2019. “Characteristics of Bi-Metallic Interfaces Formed During Direct Energy Deposition Additive Manufacturing Processing.” Metallurgical and Materials Transactions. B, Process Metallurgy and Materials Processing Science 50 (4): 1921–1930. doi:https://doi.org/10.1007/s11663-019-01612-1.
- Beyerlein, I. J., N. A. Mara, J. Wang, J. S. Carpenter, S. J. Zheng, W. Z. Han, R. F. Zhang, K. Kang, T. Nizolek, and T. M. Pollock. 2012. “Structure–Property–Functionality of Bimetal Interfaces.” JOM Journal of the Minerals Metals and Materials Society 64: 1192–1207. doi:https://doi.org/10.1007/s11837-012-0431-0.
- Blakey-Milner, Byron, Paul Gradl, Glen Snedden, Michael Brooks, Jean Pitot, Elena Lopez, Martin Leary, Filippo Berto, and Anton du Plessis. 2021. “Metal Additive Manufacturing in Aerospace: A Review.” Materials & Design 209: 110008. doi:https://doi.org/10.1016/j.matdes.2021.110008.
- Bobbio, Lourdes D., Richard A. Otis, John Paul Borgonia, R. Peter Dillon, Andrew A. Shapiro, Zi-Kui Liu, and Allison M. Beese. 2017. “Additive Manufacturing of a Functionally Graded Material from Ti-6Al-4V to Invar: Experimental Characterization and Thermodynamic Calculations.” Acta Materialia 127: 133–142. doi:https://doi.org/10.1016/j.actamat.2016.12.070.
- Carroll, Beth E., Richard A. Otis, John Paul Borgonia, Jong-ook Suh, R. Peter Dillon, Andrew A. Shapiro, Douglas C. Hofmann, Zi-Kui Liu, and Allison M. Beese. 2016. “Functionally Graded Material of 304L Stainless Steel and Inconel 625 Fabricated by Directed Energy Deposition: Characterization and Thermodynamic Modeling.” Acta Materialia 108: 46–54. doi:https://doi.org/10.1016/j.actamat.2016.02.019.
- Chen, Bo, and Jyoti Mazumder. 2017. “Role of Process Parameters during Additive Manufacturing by Direct Metal Deposition of Inconel 718.” Rapid Prototyping Journal 23 (5): 919–929.
- Chen, Jie, Yongqiang Yang, Changhui Song, Mingkang Zhang, Shibiao Wu, and Di Wang. 2019. “Interfacial Microstructure and Mechanical Properties of 316L /CuSn10 Multi-Material Bimetallic Structure Fabricated by Selective Laser Melting.” Materials Science and Engineering: A 752: 75–85. doi:https://doi.org/10.1016/j.msea.2019.02.097.
- Gong, X., J. L. Fan, F. Ding, M. Song, and B. Y. Huang. 2012. “Effect of Tungsten Content on Microstructure and Quasi-Static Tensile Fracture Characteristics of Rapidly Hot-Extruded W–Ni–Fe Alloys.” International Journal of Refractory Metals and Hard Materials 30 (1): 71–77. doi:https://doi.org/10.1016/j.ijrmhm.2011.06.014.
- Guan, Tingting, Suiyuan Chen, Xueting Chen, Jing Liang, Changsheng Liu, and Mei Wang. 2019. “Effect of Laser Incident Energy on Microstructures and Mechanical Properties of 12CrNi2Y Alloy Steel by Direct Laser Deposition.” Journal of Materials Science & Technology 35 (2): 395–402. doi:https://doi.org/10.1016/j.jmst.2018.10.024.
- Hall, Loura. “Conventional and Flash Sintering of Tungsten and Tungsten Alloys.” Text. NASA, January 7, 2021. http://www.nasa.gov/directorates/spacetech/strg/early-stage-innovations-esi/esi2020/Conventional_and_Flash_Sintering_of_Tungsten_and_Tungsten_Alloys.
- Han, Pinlian. 2017. “Additive Design and Manufacturing of Jet Engine Parts.” Engineering 3 (5): 648–652. doi:https://doi.org/10.1016/J.ENG.2017.05.017.
- Henager, C., et al. 2015. “Recent Progress in the Development of Ductile-Phase Toughened Tungsten for Plasma-Facing Materials: W-Ni-Fe Composites,” June 2015, DxOI: https://doi.org/10.13140/RG.2.1.2088.4960, In book: Fusion Reactor Materials Program Semiannual Progress Reports DOE/ER-0313/58, Chapter: 4.2, Volume 58, http://web.ornl.gov/sci/physical_sciences_directorate/mst/fusionreactor/Vol58.shtml].
- Hosseini, E., and V. A. Popovich. 2019. “A Review of Mechanical Properties of Additively Manufactured Inconel 718.” Additive Manufacturing 30: 100877. doi:https://doi.org/10.1016/j.addma.2019.100877.
- Kumar, S. P., S. Elangovan, R. Mohanraj, and J. R. Ramakrishna. 2021. “A Review on Properties of Inconel 625 and Inconel 718 Fabricated Using Direct Energy Deposition.” Materials Today: Proceedings 46: 7892–7906. doi:https://doi.org/10.1016/j.matpr.2021.02.566.
- Li, Guangyu, Wenming Jiang, Feng Guan, Junwen Zhu, Zheng Zhang, and Zitian Fan. 2021. “Microstructure, Mechanical Properties and Corrosion Resistance of A356 Aluminum/AZ91D Magnesium Bimetal Prepared by a Compound Casting Combined with a Novel Ni-Cu Composite Interlayer.” Journal of Materials Processing Technology 288: 116874. doi:https://doi.org/10.1016/j.jmatprotec.2020.116874.
- Li, J. C., X. Lin, N. Kang, J. L. Lu, Q. Z. Wang, and W. D. Huang. 2020a. “Microstructure,: Tensile and Wear Properties of a Novel Graded Al Matrix Composite Prepared by Direct Energy Deposition.” Journal of Alloys and Compounds 826: 154077. doi:https://doi.org/10.1016/j.jallcom.2020.154077.
- Li, Chun, Yingpei Wang, Shiyu Ma, Xiaoshan Yang, Jinfeng Li, Yuzhao Zhou, Xue Liu, Jingang Tang, Xiaoying Wang, and Guomin Le. 2020b. “Densification, Microstructural Evolutions of 90W-7Ni-3Fe Tungsten Heavy Alloys during Laser Melting Deposition Process.” International Journal of Refractory Metals and Hard Materials 91: 105254. doi:https://doi.org/10.1016/j.ijrmhm.2020.105254.
- Loh, Giselle Hsiang, Eujin Pei, David Harrison, and Mario D. Monzón. 2018. “An Overview of Functionally Graded Additive Manufacturing.” Additive Manufacturing 23: 34–44. doi:https://doi.org/10.1016/j.addma.2018.06.023.
- Montazeri, S., M. Aramesh, A. F. M. Arif, and S. C. Veldhuis. 2019. “Tribological Behavior of Differently Deposited Al-Si Layer in the Improvement of Inconel 718 Machinability.” International Journal of Advanced Manufacturing Technology 105 (1): 1245–1258. doi:https://doi.org/10.1007/s00170-019-04281-1.
- Onuike, B., and A. Bandyopadhyay. 2018. “Additive manufacturing of Inconel 718 – Ti6Al4V bimetallic structures.” Additive Manufacturing 22: 844–851.
- Onuike, Bonny, Bryan Heer, and Amit Bandyopadhyay. 2018. “Additive Manufacturing of Inconel 718—Copper Alloy Bimetallic Structure Using Laser Engineered Net Shaping (LENSTM).” Additive Manufacturing 21: 133–140. doi:https://doi.org/10.1016/j.addma.2018.02.007.
- Pan, Tan, Xinchang Zhang, Tomoya Yamazaki, Austin Sutton, Wenyuan Cui, Lan Li, and Frank Liou. July 21, 2020. “Characteristics of Inconel 625—Copper Bimetallic Structure Fabricated by Directed Energy Deposition.” International Journal of Advanced Manufacturing Technology 109 (5/6): 1261–1274. doi:https://doi.org/10.1007/s00170-020-05713-z.
- Rajak, Dipen Kumar, Durgesh D. Pagar, Ravinder Kumar, and Catalin I. Pruncu. 2019. “Recent Progress of Reinforcement Materials: A Comprehensive Overview of Composite Materials.” Journal of Materials Research and Technology 8 (6): 6354–6374. doi:https://doi.org/10.1016/j.jmrt.2019.09.068.
- Sahasrabudhe, Himanshu, Susmita Bose, and Amit Bandyopadhyay. 2018. “Laser Processed Calcium Phosphate Reinforced CoCrMo for Load-Bearing Applications: Processing and Wear Induced Damage Evaluation.” Acta Biomaterialia 66: 118–128. doi:https://doi.org/10.1016/j.actbio.2017.11.022.
- Schuster, Brian, Lee Magness, and U.S. Army Research Laboratory, issuing body. 2005. A Comparison of the Deformation, Flow, and Failure of Two Tungsten Heavy Alloys in Ballistic Impacts. Aberdeen Proving Ground, MD: Army Research Laboratory.
- Shakerin, Sajad, Mehdi Sanjari, Babak Shalchi Amirkhiz, and Mohsen Mohammadi. 2020. “Interface Engineering of Additively Manufactured Maraging Steel-H13 Bimetallic Structures.” Materials Characterization 170: 110728. doi:https://doi.org/10.1016/j.matchar.2020.110728.
- Shang, Chun, Chenyang Wang, Guojian Xu, Changfu Li, and Junhua You. 2019. “Laser Additive Manufacturing of TA15 - Inconel 718 Bimetallic Structure via Nb/Cu Multi-Interlayer.” Vacuum 169: 108888. doi:https://doi.org/10.1016/j.vacuum.2019.108888.
- Sreekanth, Suhas, Ehsan Ghassemali, Kjell Hurtig, Shrikant Joshi, and Joel Andersson. 2020. “Effect of Direct Energy Deposition Process Parameters on Single-Track Deposits of Alloy 718.” Metals 10 (1), doi:https://doi.org/10.3390/met10010096.
- Sun, Shanshan, Qing Teng, Yin Xie, Tong Liu, Rui Ma, Jie Bai, Chao Cai, and Qingsong Wei, “Two-step heat treatment for laser powder bed fusion of a nickel-based superalloy with simultaneously enhanced tensile strength and ductility,” Additive Manufacturing, 46, 102168 (2021). doi:https://doi.org/10.1016/j.addma.2021.102168.
- Şahin, Y. 2014. “Recent Progress in Processing of Tungsten Heavy Alloys.” Journal of Powder Technology 2014 (764306): 22. doi:https://doi.org/10.1155/2014/764306.
- Xiang, D. P., L. Ding, Y. Y. Li, G. B. Chen, and Y. W. Zhao. 2013. “Preparation of Fine-Grained Tungsten Heavy Alloys by Spark Plasma Sintered W–7Ni–3Fe Composite Powders with Different Ball Milling Time.” Journal of Alloys and Compounds 562: 19–24. doi:https://doi.org/10.1016/j.jallcom.2013.02.014.
- Xiang, D. P., L. Ding, Y. Y. Li, J. B. Li, X. Q. Li, and C. Li. 2012. “Microstructure and Mechanical Properties of Fine-Grained W–7Ni–3Fe Heavy Alloy by Spark Plasma Sintering.” Materials Science and Engineering: A 551: 95–99. doi:https://doi.org/10.1016/j.msea.2012.04.099.
- Yu, Xiaobin, Xin Lin, Fencheng Liu, Lilin Wang, Yao Tang, Jiacong Li, Shuya Zhang, and Weidong Huang. 2020. “Influence of Post-Heat-Treatment on the Microstructure and Fracture Toughness Properties of Inconel 718 Fabricated with Laser Directed Energy Deposition Additive Manufacturing.” Materials Science and Engineering: A 798: 140092. doi:https://doi.org/10.1016/j.msea.2020.140092.
- Zakipour, Shahrokh, Ayoub Halvaee, Ahmad Ali Amadeh, Majid Samavatian, and Alireza Khodabandeh. 2015. “An Investigation on Microstructure Evolution and Mechanical Properties during Transient Liquid Phase Bonding of Stainless Steel 316L to Ti–6Al–4V.” Journal of Alloys and Compounds 626: 269–276. doi:https://doi.org/10.1016/j.jallcom.2014.11.160.
- Zhang, Yanning, and Amit Bandyopadhyay. 2021. “Tailoring compositionally graded interface of 316L stainless steel to Al12Si aluminum alloy bimetallic structures via Additive Manufacturing.” ACS Applied Materials & Interfaces 13 (7): 9174–9185. DOI?.