References
- Bennett, Jennifer, Daniel Garcia, Marie Kendrick, Travis Hartman, Gregory Hyatt, Kornel Ehmann, Fengqi You, and Jian Cao. 2019. “Repairing Automotive Dies with Directed Energy Deposition: Industrial Application and Life Cycle Analysis.” Journal of Manufacturing Science and Engineering 141 (2): 021019(1–9). doi: https://doi.org/10.1115/1.4042078
- Bi, Guijun, Andres Gasser, Konrad Wissenbach, Alexander Drenker, and Reinhart Poprawe. 2006. “Characterization of the Process Control for the Direct Laser Metallic Powder Deposition.” Surface and Coatings Technology 201 (6): 2676–2683. doi: https://doi.org/10.1016/j.surfcoat.2006.05.006
- Bordin, Alberto, Stefania Bruschi, Andrea Ghiotti, Francesco Bucciotti, and Luca Facchini. 2014. “Comparison Between Wrought and EBM Ti6Al4 V Machinability Characteristics.” In Key Engineering Materials, edited by Jari Larkiola, Vol. 611, 1186–1193. Zurich: Trans Tech Publ.
- Carlsson, Susanna, and P.-L. Larsson. 2001. “On the Determination of Residual Stress and Strain Fields by Sharp Indentation Testing.: Part I: Theoretical and Numerical Analysis.” Acta Materialia 49 (12): 2179–2191. doi: https://doi.org/10.1016/S1359-6454(01)00122-7
- Chen, Niechen, and Matthew Frank. 2019. “Process Planning for Hybrid Additive and Subtractive Manufacturing to Integrate Machining and Directed Energy Deposition.” Procedia Manufacturing 34: 205–213. doi: https://doi.org/10.1016/j.promfg.2019.06.140
- Chen, Wen, Thomas Voisin, Yin Zhang, Jean-Baptiste Florien, Christopher M Spadaccini, David L McDowell, Ting Zhu, and Y. Morris Wang. 2019. “Microscale Residual Stresses in Additively Manufactured Stainless Steel.” Nature Communications 10 (1): 1–12. doi: https://doi.org/10.1038/s41467-018-07882-8
- Chen, Yuan, Yanbing Guo, Mengjia Xu, Chunfei Ma, Qunli Zhang, Liang Wang, Jianhua Yao, and Zhuguo Li. 2019. “Study on the Element Segregation and Laves Phase Formation in the Laser Metal Deposited IN718 Superalloy by Flat Top Laser and Gaussian Distribution Laser.” Materials Science and Engineering: A 754: 339–347. doi: https://doi.org/10.1016/j.msea.2019.03.096
- Dávila, José Luis, Paulo Inforçatti Neto, Pedro Yoshito Noritomi, Reginaldo Teixeira Coelho, and Jorge Vicente Lopes da Silva. 2020. “Hybrid Manufacturing: A Review of the Synergy Between Directed Energy Deposition and Subtractive Processes.” The International Journal of Advanced Manufacturing Technology 110: 1–14.
- DebRoy, T., T. Mukherjee, J. O. Milewski, J. W. Elmer, B. Ribic, J. J. Blecher, and W. Zhang. 2019. “Scientific, Technological and Economic Issues in Metal Printing and Their Solutions.” Nature Materials 18 (10): 1026–1032. doi: https://doi.org/10.1038/s41563-019-0408-2
- DebRoy, Tarasankar, H. L. Wei, J. S. Zuback, T. Mukherjee, J. W. Elmer, J. O. Milewski, Allison Michelle Beese, A. D. Wilson-Heid, A. De, and W. Zhang. 2018. “Additive Manufacturing of Metallic Components–Process, Structure and Properties.” Progress in Materials Science 92: 112–224. doi: https://doi.org/10.1016/j.pmatsci.2017.10.001
- Dwivedi, Rajeev, Srdja Zekovic, and Radovan Kovacevic. 2007. “A Novel Approach to Fabricate Uni-Directional and Branching Slender Structures Using Laser-Based Direct Metal Deposition.” International Journal of Machine Tools and Manufacture 47 (7-8): 1246–1256. doi: https://doi.org/10.1016/j.ijmachtools.2006.08.012
- Feldhausen, Thomas, Narendran Raghavan, Kyle Saleeby, Lonnie Love, and Thomas Kurfess. 2021. “Mechanical Properties and Microstructure of 316L Stainless Steel Produced by Hybrid Manufacturing.” Journal of Materials Processing Technology 290: 116970. doi: https://doi.org/10.1016/j.jmatprotec.2020.116970
- Fernandez-Zelaia, Patxi, Michael M Kirka, Andrés Márquez Rossy, Yousub Lee, and Sebastien N Dryepondt. 2021. “Nickel-Based Superalloy Single Crystals Fabricated via Electron Beam Melting.” Acta Materialia 216: 117133. doi: https://doi.org/10.1016/j.actamat.2021.117133
- Flynn, Joseph M, Alborz Shokrani, Stephen T Newman, and Vimal Dhokia. 2016. “Hybrid Additive and Subtractive Machine Tools–Research and Industrial Developments.” International Journal of Machine Tools and Manufacture 101: 79–101. doi: https://doi.org/10.1016/j.ijmachtools.2015.11.007
- Furukawa, Minoru, Yoshinori Iwahashi, Zenji Horita, Minoru Nemoto, Nikolai K Tsenev, Ruslan Z Valiev, and Terence G Langdon. 1997. “Structural Evolution and the Hall-Petch Relationship in an Al-Mg-Li-Zr Alloy with Ultra-Fine Grain Size.” Acta Materialia 45 (11): 4751–4757. doi: https://doi.org/10.1016/S1359-6454(97)00120-1
- Gibson, Ian, David Rosen, Brent Stucker, and Mahyar Khorasani. 2021. “Post-processing.” In Additive Manufacturing Technologies, 457–489. Cham: Springer.
- Gu, Dongdong, Xinyu Shi, Reinhart Poprawe, David L Bourell, Rossitza Setchi, and Jihong Zhu. 2021. “Material-Structure-Performance Integrated Laser-metal Additive Manufacturing.” Science 372 (6545): 932–947. doi: https://doi.org/10.1126/science.abg1487
- Han, Changjun, Qihong Fang, Yusheng Shi, Shu Beng Tor, Chee Kai Chua, and Kun Zhou. 2020. “Recent Advances on High-entropy Alloys for 3D Printing.” Advanced Materials 32 (26): 1903855. doi: https://doi.org/10.1002/adma.201903855
- Helmer, H., A. Bauereiß, R. F. Singer, and C. Körner. 2016. “Grain Structure Evolution in Inconel 718 During Selective Electron Beam Melting.” Materials Science and Engineering: A 668: 180–187. doi: https://doi.org/10.1016/j.msea.2016.05.046
- Hou, Guanming, Anhai Li, Xuhao Song, Hu Sun, and Jun Zhao. 2018. “Effect of Cutting Parameters on Surface Quality in Multi-step Turning of Ti-6Al-4V Titanium Alloy.” The International Journal of Advanced Manufacturing Technology 98 (5): 1355–1365. doi: https://doi.org/10.1007/s00170-018-2317-y
- Hu, Yunlong, Xin Lin, Yunlong Li, Yongchao Ou, Xuehao Gao, Qiang Zhang, Wei Li, and Weidong Huang. 2021. “Microstructural Evolution and Anisotropic Mechanical Properties of Inconel 625 Superalloy Fabricated by Directed Energy Deposition.” Journal of Alloys and Compounds 870: 159426. doi: https://doi.org/10.1016/j.jallcom.2021.159426
- Ibaraki, Soichi, Takeyuki Iritani, and Tetsuya Matsushita. 2012. “Calibration of Location Errors of Rotary Axes on Five-axis Machine Tools by on-the-Machine Measurement Using a Touch-trigger Probe.” International Journal of Machine Tools and Manufacture 58: 44–53. doi: https://doi.org/10.1016/j.ijmachtools.2012.03.002
- Ibaraki, Soichi, Takeyuki Iritani, and Tetsuya Matsushita. 2013. “Error Map Construction for Rotary Axes on Five-Axis Machine Tools by on-the-Machine Measurement Using a Touch-trigger Probe.” International Journal of Machine Tools and Manufacture 68: 21–29. doi: https://doi.org/10.1016/j.ijmachtools.2013.01.001
- Jiang, Qi, Peilei Zhang, Zhishui Yu, Haichuan Shi, Di Wu Shaowei Li, Hua Yan, Xin Ye, and Jieshi Chen. 2021. “Microstructure and Mechanical Properties of Thick-Walled Inconel 625 Alloy Manufactured by Wire Arc Additive Manufacture with Different Torch Paths.” Advanced Engineering Materials 23 (1): 2000728. doi: https://doi.org/10.1002/adem.202000728
- Knapp, Gerry L, Narendran Raghavan, Alex Plotkowski, and Tarasankar Debroy. 2019. “Experiments and Simulations on Solidification Microstructure for Inconel 718 in Powder Bed Fusion Electron Beam Additive Manufacturing.” Additive Manufacturing 25: 511–521. doi: https://doi.org/10.1016/j.addma.2018.12.001
- Li, Boyuan, Changjun Han, Choon Wee Joel Lim, and Kun Zhou. 2022. “Interface Formation and Deformation Behaviors of an Additively Manufactured Nickel-Aluminum-Bronze/15-5 PH Multimaterial via Laser-powder Directed Energy Deposition.” Materials Science and Engineering: A 829: 142101. doi: https://doi.org/10.1016/j.msea.2021.142101
- Li, Boyuan, Han Zheng, Changjun Han, and Kun Zhou. 2021. “Nanotwins-Containing Microstructure and Superior Mechanical Strength of a Cu–9Al–5Fe–5Ni Alloy Additively Manufactured by Laser Metal Deposition.” Additive Manufacturing 39: 101825. doi: https://doi.org/10.1016/j.addma.2020.101825
- Li, Shuai, Bi Zhang, and Qian Bai. 2020. “Effect of Temperature Buildup on Milling Forces in Additive/Subtractive Hybrid Manufacturing of Ti-6Al-4V.” The International Journal of Advanced Manufacturing Technology 107 (9): 4191–4200. doi: https://doi.org/10.1007/s00170-020-05309-7
- Li, Simeng, Hui Xiao, Keyang Liu, Wenjia Xiao, Yanqin Li, Xu Han, Jyoti Mazumder, and Lijun Song. 2017. “Melt-Pool Motion, Temperature Variation and Dendritic Morphology of Inconel 718 During Pulsed-and Continuous-Wave Laser Additive Manufacturing: A Comparative Study.” Materials & Design 119: 351–360. doi: https://doi.org/10.1016/j.matdes.2017.01.065
- Li, Yingli, Kun Zhou, Pengfei Tan, Shu Beng Tor, Chee Kai Chua, and Kah Fai Leong. 2018. “Modeling Temperature and Residual Stress Fields in Selective Laser Melting.” International Journal of Mechanical Sciences 136: 24–35. doi: https://doi.org/10.1016/j.ijmecsci.2017.12.001
- Liu, F. Q., L. Wei, S. Q. Shi, and H. L. Wei. 2020. “On the Varieties of Build Features During Multi-Layer Laser Directed Energy Deposition.” Additive Manufacturing 36: 101491. doi: https://doi.org/10.1016/j.addma.2020.101491
- Liu, Renwei, Zhiyuan Wang, Todd Sparks, Frank Liou, and Joseph Newkirk. 2017. “Aerospace Applications of Laser Additive Manufacturing.” In Laser Additive Manufacturing, 351–371. Sawston, Cambridge: Elsevier.
- Liu, Shunyu, and Yung C Shin. 2019. “Additive Manufacturing of Ti6Al4 V Alloy: A Review.” Materials & Design 164: 107552. doi: https://doi.org/10.1016/j.matdes.2018.107552
- Mills, Kenneth C. 2002. Recommended Values of Thermophysical Properties for Selected Commercial Alloys. Sawston, Cambridge: Woodhead Publishing.
- Ni, Chenbing, Lida Zhu, Zhongpeng Zheng, Jiayi Zhang, Yun Yang, Ruochen Hong, Yuchao Bai, Wen Feng Lu, and Hao Wang. 2020a. “Effects of Machining Surface and Laser Beam Scanning Strategy on Machinability of Selective Laser Melted Ti6Al4 V Alloy in Milling.” Materials & Design 194: 108880. doi: https://doi.org/10.1016/j.matdes.2020.108880
- Ni, Chenbing, Lida Zhu, Zhongpeng Zheng, Jiayi Zhang, Yun Yang, Jin Yang, Yuchao Bai, Can Weng, Wen Feng Lu, and Hao Wang. 2020b. “Effect of Material Anisotropy on Ultra-Precision Machining of Ti-6Al-4V Alloy Fabricated by Selective Laser Melting.” Journal of Alloys and Compounds 848: 156457. doi: https://doi.org/10.1016/j.jallcom.2020.156457
- Oyelola, Olusola, Pete Crawforth, Rachid M’Saoubi, and Adam T Clare. 2018. “On the Machinability of Directed Energy Deposited Ti6Al4 V.” Additive Manufacturing 19: 39–50. doi: https://doi.org/10.1016/j.addma.2017.11.005
- Panin, Alexey V, Marina S Kazachenok, Sergey V Panin, and Filippo Berto. 2020. “Scale Levels of Quasi-Static and Dynamic Fracture Behavior of Ti-6Al-4V Parts Built by Various Additive Manufacturing Methods.” Theoretical and Applied Fracture Mechanics 110: 102781. doi: https://doi.org/10.1016/j.tafmec.2020.102781
- Pei, Yutao T, and J Th M De Hosson. 2000. “Functionally Graded Materials Produced by Laser Cladding.” Acta Materialia 48 (10): 2617–2624. doi: https://doi.org/10.1016/S1359-6454(00)00065-3
- Pérez-Ruiz, José David, Luis Norberto López de Lacalle, Gorka Urbikain, Octavio Pereira, Silvia Martínez, and Jorge Bris. 2021. “On the Relationship Between Cutting Forces and Anisotropy Features in the Milling of LPBF Inconel 718 for Near Net Shape Parts.” International Journal of Machine Tools and Manufacture 170: 103801. doi: https://doi.org/10.1016/j.ijmachtools.2021.103801
- Poirier, David R. 1987. “Permeability for Flow of Interdendritic Liquid in Columnar-Dendritic Alloys.” Metallurgical Transactions B 18 (1): 245–255. doi: https://doi.org/10.1007/BF02658450
- Prabhakar, P., William J Sames, R. Dehoff, and Sudarsanam Suresh Babu. 2015. “Computational Modeling of Residual Stress Formation During the Electron Beam Melting Process for Inconel 718.” Additive Manufacturing 7: 83–91. doi: https://doi.org/10.1016/j.addma.2015.03.003
- Prasad, Arvind, Lang Yuan, Peter Lee, Mitesh Patel, Dong Qiu, Mark Easton, and David StJohn. 2020. “Towards Understanding Grain Nucleation Under Additive Manufacturing Solidification Conditions.” Acta Materialia 195: 392–403. doi: https://doi.org/10.1016/j.actamat.2020.05.012
- Rotella, Giovanna, Stano Imbrogno, Sebastiano Candamano, and Domenico Umbrello. 2018. “Surface Integrity of Machined Additively Manufactured Ti Alloys.” Journal of Materials Processing Technology 259: 180–185. doi: https://doi.org/10.1016/j.jmatprotec.2018.04.030
- Song, Boxue, Tianbiao Yu, Xingyu Jiang, Wenchao Xi, Xiaoli Lin, Zhelun Ma, and Zhao Wang. 2021. “Development of the Molten Pool and Solidification Characterization in Single Bead Multilayer Direct Energy Deposition.” Additive Manufacturing: 102479. doi: https://doi.org/10.1016/j.addma.2021.102479
- Soshi, Masakazu, Jonathan Ring, Christian Young, Yohei Oda, and Masahiko Mori. 2017. “Innovative Grid Molding and Cooling Using an Additive and Subtractive Hybrid CNC Machine Tool.” CIRP Annals 66 (1): 401–404. doi: https://doi.org/10.1016/j.cirp.2017.04.093
- Stevens, Erica L, Jakub Toman, Albert C To, and Markus Chmielus. 2017. “Variation of Hardness, Microstructure, and Laves Phase Distribution in Direct Laser Deposited Alloy 718 Cuboids.” Materials & Design 119: 188–198. doi: https://doi.org/10.1016/j.matdes.2017.01.031
- Sui, Shang, Jing Chen, Zuo Li, Haosheng Li, Xuan Zhao, and Hua Tan. 2020. “Investigation of Dissolution Behavior of Laves Phase in Inconel 718 Fabricated by Laser Directed Energy Deposition.” Additive Manufacturing 32: 101055. doi: https://doi.org/10.1016/j.addma.2020.101055
- Sui, Shang, Hua Tan, Jing Chen, Chongliang Zhong, Zuo Li, Wei Fan, Andres Gasser, and Weidong Huang. 2019. “The Influence of Laves Phases on the Room Temperature Tensile Properties of Inconel 718 Fabricated by Powder Feeding Laser Additive Manufacturing.” Acta Materialia 164: 413–427. doi: https://doi.org/10.1016/j.actamat.2018.10.032
- Tang, Haibin, Haijun Huang, Changyong Liu, Zhao Liu, and Wentao Yan. 2021. “Multi-scale Modelling of Structure-property Relationship in Additively Manufactured Metallic Materials.” International Journal of Mechanical Sciences 194: 106185. doi: https://doi.org/10.1016/j.ijmecsci.2020.106185
- Varghese, Vinay, and Soham Mujumdar. 2021. “Micromilling-induced Surface Integrity of Porous Additive Manufactured Ti6Al4 V Alloy.” Procedia Manufacturing 53: 387–394. doi: https://doi.org/10.1016/j.promfg.2021.06.041
- Wang, Shuhao, Lida Zhu, Yichao Dun, Zhichao Yang, Jerry Ying Hsi Fuh, and Wentao Yan. 2021. “Multi-physics Modeling of Direct Energy Deposition Process of Thin-walled Structures: Defect Analysis.” Computational Mechanics 67 (4): 1229–1242. doi: https://doi.org/10.1007/s00466-021-01992-9
- Wang, Shuhao, Lida Zhu, Jerry Ying Hsi Fuh, Haiquan Zhang, and Wentao Yan. 2020. “Multi-physics Modeling and Gaussian Process Regression Analysis of Cladding Track Geometry for Direct Energy Deposition.” Optics and Lasers in Engineering 127: 105950. doi: https://doi.org/10.1016/j.optlaseng.2019.105950
- Wang, Xiaoqing, and Y. Kevin Chou. 2015. “A Method to Estimate Residual Stress in Metal Parts Made by Selective Laser Melting.” In ASME International Mechanical Engineering Congress and Exposition, 57359:V02AT02A015. American Society of Mechanical Engineers.
- Wei, H. L., G. L. Knapp, T. Mukherjee, and Tarasankar DebRoy. 2019. “Three-dimensional Grain Growth During Multi-layer Printing of a Nickel-based Alloy Inconel 718.” Additive Manufacturing 25: 448–459. doi: https://doi.org/10.1016/j.addma.2018.11.028
- Yang, Lihang, Kaushalendra V Patel, Krzysztof Jarosz, and Tuğrul Özel. 2020. “Surface Integrity Induced in Machining Additively Fabricated Nickel Alloy Inconel 625.” Procedia CIRP 87: 351–354. doi: https://doi.org/10.1016/j.procir.2020.02.104
- Yang, Y., Yi Zhu, M. M. Khonsari, and H. Yang. 2019. “Wear Anisotropy of Selective Laser Melted 316L Stainless Steel.” Wear 428: 376–386. doi: https://doi.org/10.1016/j.wear.2019.04.001
- Yang, Yuying, Yadong Gong, Changhe Li, Xuelong Wen, and Jingyu Sun. 2021. “Mechanical Performance of 316 L Stainless Steel by Hybrid Directed Energy Deposition and Thermal Milling Process.” Journal of Materials Processing Technology 291: 117023. doi: https://doi.org/10.1016/j.jmatprotec.2020.117023
- Yang, Zhichao, Lida Zhu, Shuhao Wang, Jinsheng Ning, Yichao Dun, Guiru Meng, Pengsheng Xue, Peihua Xu, and Bo Xin. 2021. “Effects of Ultrasound on Multilayer Forming Mechanism of Inconel 718 in Directed Energy Deposition.” Additive Manufacturing 48: 102462. doi: https://doi.org/10.1016/j.addma.2021.102462
- Yang, Zhichao, Lida Zhu, Guixiang Zhang, Chenbing Ni, and Bin Lin. 2020. “Review of Ultrasonic Vibration-Assisted Machining in Advanced Materials.” International Journal of Machine Tools and Manufacture 156: 103594. doi: https://doi.org/10.1016/j.ijmachtools.2020.103594
- Zerbst, Uwe, Giovanni Bruno, Jean-Yves Buffiere, Thomas Wegener, Thomas Niendorf, Tao Wu, Xiang Zhang, Nikolai Kashaev, Giovanni Meneghetti, and Nik Hrabe. 2021. “Damage Tolerant Design of Additively Manufactured Metallic Components Subjected to Cyclic Loading: State of the Art and Challenges.” Progress in Materials Science 121: 100786. doi: https://doi.org/10.1016/j.pmatsci.2021.100786
- Zhang, Y. C., Z. G. Li, P. L. Nie, and Y. X. Wu. 2013. “Effect of Ultrarapid Cooling on Microstructure of Laser Cladding IN718 Coating.” Surface Engineering 29 (6): 414–418. doi: https://doi.org/10.1179/1743294413Y.0000000142
- Zhang, Yupeng, Qingkai Shen, Xizhang Chen, Subramanian Jayalakshmi, Ramachandra Arvind Singh, Sergey Konovalov, Vladislav B Deev, and Evgeny S Prusov. 2021. “Strengthening Mechanisms in CoCrFeNiX0. 4 (Al, Nb, Ta) High Entropy Alloys Fabricated by Powder Plasma Arc Additive Manufacturing.” Nanomaterials 11 (3): 721. doi: https://doi.org/10.3390/nano11030721
- Zhou, Y. H., Z. H. Zhang, Y. P. Wang, G. Liu, S. Y. Zhou, Y. L. Li, J. Shen, and M. Yan. 2019. “Selective Laser Melting of Typical Metallic Materials: An Effective Process Prediction Model Developed by Energy Absorption and Consumption Analysis.” Additive Manufacturing 25: 204–217. doi: https://doi.org/10.1016/j.addma.2018.10.046
- Zhu, L., S. Wang, H. Pan, C. Yuan, and X. Chen. 2020. “Research on Remanufacturing Strategy for 45 Steel Gear Using H13 Steel Powder Based on Laser Cladding Technology.” Journal of Manufacturing Processes 49: 344–354. doi:https://doi.org/10.1016/j.jmapro.2019.12.009
- Zhu, L., Z. Yang, B. Xin, S. Wang, G. Meng, J. Ning, and P. Xue. 2021. “Microstructure and Mechanical Properties of Parts Formed by Ultrasonic Vibration-assisted Laser Cladding of Inconel 718.” Surface and Coatings Technology 410. doi:https://doi.org/10.1016/j.surfcoat.2021.126964
- Zhu, Lida, Pengsheng Xue, Qing Lan, Guiru Meng, Yuan Ren, Zhichao Yang, Peihua Xu, and Zhe Liu. 2021. “Recent Research and Development Status of Laser Cladding: A Review.” Optics & Laser Technology 138: 106915. doi: https://doi.org/10.1016/j.optlastec.2021.106915