References
- Al-Rubaie, S. Kassim, Saulo Melotti, Alexsandro Rabelo, José M. Paiva, Mohamed A. Elbestawi, and Stephen C. Veldhuis. 2020. “Machinability of SLM-Produced Ti6Al4V Titanium Alloy Parts.” Journal of Manufacturing Processes 57 (January): 768–786. doi:https://doi.org/10.1016/j.jmapro.2020.07.035.
- Avila, Jose D., Murat Isik, and Amit Bandyopadhyay. 2020. “Titanium–Silicon on CoCr Alloy for Load-Bearing Implants Using Directed Energy Deposition-Based Additive Manufacturing.” ACS Applied Materials & Interfaces 12 (46): 51263–51272. doi:https://doi.org/10.1021/acsami.0c15279.
- Bagherzadeh, Amin. 2018. “Experimental Investigation of Alternative Cooling Methods in Machining Operations.” http://risc01.sabanciuniv.edu/record=b1918106 (Table of Contents).
- Bagherzadeh, Amin, and Erhan Budak. 2018. “Investigation of Machinability in Turning of Difficult-to-Cut Materials Using a New Cryogenic Cooling Approach.” Tribology International 119 (December 2017): 510–520. doi:https://doi.org/10.1016/j.triboint.2017.11.033.
- Bagherzadeh, Amin, Emel Kuram, and Erhan Budak. 2021. “Experimental Evaluation of Eco-Friendly Hybrid Cooling Methods in Slot Milling of Titanium Alloy.” Journal of Cleaner Production 289: 125817. doi:https://doi.org/10.1016/j.jclepro.2021.125817.
- Bandyopadhyay, Amit, Anish Shivaram, Murat Isik, Jose D. Avila, William S. Dernell, and Susmita Bose. 2019. “Additively Manufactured Calcium Phosphate Reinforced CoCrMo Alloy: Bio-Tribological and Biocompatibility Evaluation for Load-Bearing Implants.” Additive Manufacturing 28 (August): 312–324. doi:https://doi.org/10.1016/j.addma.2019.04.020.
- Bedmar, Javier, Ainhoa Riquelme, Pilar Rodrigo, Belen Torres, and Joaquin Rams. 2021. “Comparison of Different Additive Manufacturing Methods for 316 l Stainless Steel.” Materials 14: 21. doi:https://doi.org/10.3390/ma14216504.
- Brown, D., C. Li, Z. Y. Liu, X. Y. Fang, and Y. B. Guo. 2018. “Surface Integrity of Inconel 718 by Hybrid Selective Laser Melting and Milling.” Virtual and Physical Prototyping 13 (1): 26–31. doi:https://doi.org/10.1080/17452759.2017.1392681.
- Cao, G. H., T. Y. Sun, C. H. Wang, Xing Li, M. Liu, Z. X. Zhang, P. F. Hu, et al. 2018. “Investigations of Γ′, Γ″ and δ Precipitates in Heat-Treated Inconel 718 Alloy Fabricated by Selective Laser Melting.” Materials Characterization 136 (February): 398–406. doi:https://doi.org/10.1016/j.matchar.2018.01.006.
- Cheng, Bo, Subin Shrestha, and Kevin Chou. 2016. “Stress and Deformation Evaluations of Scanning Strategy Effect in Selective Laser Melting.” Additive Manufacturing 12: 240–251. doi:https://doi.org/10.1016/j.addma.2016.05.007.
- Dai, Xing, Kejia Zhuang, Donglin Pu, Weiwei Zhang, and Han Ding. 2020. “An Investigation of the Work Hardening Behavior in Interrupted Cutting Inconel 718 Under Cryogenic Conditions.” Materials 13: 9. doi:https://doi.org/10.3390/ma13092202.
- Do, Dang Khoa, and Peifeng Li. 2016. “The Effect of Laser Energy Input on the Microstructure,: Physical and Mechanical Properties of Ti-6Al-4V Alloys by Selective Laser Melting.” Virtual and Physical Prototyping 11 (1): 41–47. doi:https://doi.org/10.1080/17452759.2016.1142215.
- Fayed, Eslam M., Mohammad Saadati, Davood Shahriari, Vladimir Brailovski, Mohammad Jahazi, and Mamoun Medraj. 2021. “Effect of Homogenization and Solution Treatments Time on the Elevated-Temperature Mechanical Behavior of Inconel 718 Fabricated by Laser Powder Bed Fusion.” Scientific Reports 11 (1): 1–17. doi:https://doi.org/10.1038/s41598-021-81618-5.
- Flynn, Joseph M., Alborz Shokrani, Stephen T. Newman, and Vimal Dhokia. 2016. “Hybrid Additive and Subtractive Machine Tools - Research and Industrial Developments.” International Journal of Machine Tools and Manufacture 101: 79–101. doi:https://doi.org/10.1016/j.ijmachtools.2015.11.007.
- Godec, M., S. Malej, D. Feizpour, C. Donik, M. Balažic, D. Klobčar, L. Pambaguian, M. Conradi, and A. Kocijan. 2021. “Hybrid Additive Manufacturing of Inconel 718 for Future Space Applications.” Materials Characterization 172, doi:https://doi.org/10.1016/j.matchar.2020.110842.
- Goel, Sneha, Anumat Sittiho, Indrajit Charit, Uta Klement, and Shrikant Joshi. 2019. “Effect of Post-Treatments under Hot Isostatic Pressure on Microstructural Characteristics of EBM-Built Alloy 718.” Additive Manufacturing 28 (December 2018): 727–737. doi:https://doi.org/10.1016/j.addma.2019.06.002.
- Hao, Tan Jun, Wai Leong Eugene Wong, and Kenneth William Dalgarno. 2017. ““An Overview of Powder Granulometry on Feedstock and Part Performance in the Selective Laser Melting Process.”.” Additive Manufacturing 18: 228–255. doi:https://doi.org/10.1016/j.addma.2017.10.011.
- Huang, Runze, Matthew Riddle, Diane Graziano, Joshua Warren, Sujit Das, Sachin Nimbalkar, Joe Cresko, and Eric Masanet. 2016. “Energy and Emissions Saving Potential of Additive Manufacturing: The Case of Lightweight Aircraft Components.” Journal of Cleaner Production 135: 1559–1570. doi:https://doi.org/10.1016/j.jclepro.2015.04.109.
- Isik, Murat, Jose D. Avila, and Amit Bandyopadhyay. 2020. “Alumina and Tricalcium Phosphate Added CoCr Alloy for Load-Bearing Implants.” Additive Manufacturing 36 (December): 101553. doi:https://doi.org/10.1016/j.addma.2020.101553.
- Isik, Murat, Erdal Kisa, Bahattin Koc, Mehmet Yildiz, Baris Pehlivanogullari, Akin Orhangul, Ozgur Poyraz, and Guray Akbulut. 2019. “Topology Optimization and Finite Elemental Analysis for an Inconel 718 Engine Mounting Bracket Manufactured via Electron Beam Melting.” https://research.sabanciuniv.edu/41130/.
- Ke, W. C., J. P. Oliveira, B. Q. Cong, S. S. Ao, Z. W. Qi, B. Peng, and Z. Zeng. 2022. “Multi-Layer Deposition Mechanism in Ultra High-Frequency Pulsed Wire Arc Additive Manufacturing (WAAM) of NiTi Shape Memory Alloys.” Additive Manufacturing 50 (November 2021): 102513. doi:https://doi.org/10.1016/j.addma.2021.102513.
- Khalil-Allafi, Jafar, Antonin Dlouhy, and Gunther Eggeler. 2002. “Ni4Ti3-Precipitation During Aging of NiTi Shape Memory Alloys and Its Influence on Martensitic Phase Transformations.” Acta Materialia 50 (17): 4255–4274. doi:https://doi.org/10.1016/S1359-6454(02)00257-4.
- Komarasamy, Mageshwari, Shivakant Shukla, Sarah Williams, Kumar Kandasamy, Shawn Kelly, and Rajiv S. Mishra. 2019. “Microstructure, Fatigue, and Impact Toughness Properties of Additively Manufactured Nickel Alloy 718.” Additive Manufacturing 28 (August): 661–675. doi:https://doi.org/10.1016/j.addma.2019.06.009.
- Kuan, Tan Joel Heang, Swee Leong Sing, and Wai Yee Yeong. 2020. ““Microstructure Modelling for Metallic Additive Manufacturing: A Review.”.” Virtual and Physical Prototyping 15 (1): 87–105. doi:https://doi.org/10.1080/17452759.2019.1677345.
- Lam, L. P., D. Q. Zhang, Z. H. Liu, and C. K. Chua. 2015. “Phase Analysis and Microstructure Characterisation of AlSi10Mg Parts Produced by Selective Laser Melting.” Virtual and Physical Prototyping 10 (4): 207–215. doi:https://doi.org/10.1080/17452759.2015.1110868.
- Liu, Z. Y., C. Li, X. Y. Fang, and Y. B. Guo. 2018. “Energy Consumption in Additive Manufacturing of Metal Parts” 26: 834–845. doi:https://doi.org/10.1016/j.promfg.2018.07.104.
- Loh, L. E., Z. H. Liu, D. Q. Zhang, M. Mapar, S. L. Sing, C. K. Chua, and W. Y. Yeong. 2014. “Selective Laser Melting of Aluminium Alloy Using a Uniform Beam Profile: The Paper Analyzes the Results of Laser Scanning in Selective Laser Melting Using a Uniform Laser Beam.” Virtual and Physical Prototyping 9 (1): 11–16. doi:https://doi.org/10.1080/17452759.2013.869608.
- Lopes, J. G., Carla M. Machado, Valdemar R. Duarte, Tiago A. Rodrigues, Telmo G. Santos, and J. P. Oliveira. 2020. “Effect of Milling Parameters on HSLA Steel Parts Produced by Wire and Arc Additive Manufacturing (WAAM).” Journal of Manufacturing Processes 59 (March): 739–749. doi:https://doi.org/10.1016/j.jmapro.2020.10.007.
- Luo, Shuncun, Wenpu Huang, Huihui Yang, Jingjing Yang, Zemin Wang, and Xiaoyan Zeng. 2019. “Microstructural Evolution and Corrosion Behaviors of Inconel 718 Alloy Produced by Selective Laser Melting Following Different Heat Treatments.” Additive Manufacturing 30 (December): 100875. doi:https://doi.org/10.1016/j.addma.2019.100875.
- Margolis, Nancy, Keith Jamison, and Louise Dove. 1999. Energy and Environmental Profile of the U.S. Metal Casting Industry. Washington, DC: Office of Industrial Technologies. https://www.energy.gov/sites/prod/files/2013/11/f4/profile_0.pdf.
- Morrow, W. R., H. Qi, I. Kim, J. Mazumder, and S. J. Skerlos. 2007. “Environmental Aspects of Laser-Based and Conventional Tool and Die Manufacturing.” Journal of Cleaner Production 15 (10): 932–943. doi:https://doi.org/10.1016/j.jclepro.2005.11.030.
- Oliveira, J. P., A. D. LaLonde, and J. Ma. 2020a. “Processing Parameters in Laser Powder Bed Fusion Metal Additive Manufacturing.” Materials and Design 193: 1–12. doi:https://doi.org/10.1016/j.matdes.2020.108762.
- Oliveira, J. P., T. G. Santos, and R. M. Miranda. 2020b. “Revisiting Fundamental Welding Concepts to Improve Additive Manufacturing: From Theory to Practice.” Progress in Materials Science 107: 100590. doi:https://doi.org/10.1016/j.pmatsci.2019.100590.
- Oyelola, Olusola, Pete Crawforth, Rachid M’Saoubi, and Adam T. Clare. 2018. “Machining of Functionally Graded Ti6Al4V/WC Produced by Directed Energy Deposition.” Additive Manufacturing 24 (August): 20–29. doi:https://doi.org/10.1016/j.addma.2018.09.007.
- Papadakis, Loucas, Andreas Loizou, Jeroen Risse, Sebastian Bremen, and Johannes Schrage. 2014. “A Computational Reduction Model for Appraising Structural Effects in Selective Laser Melting Manufacturing: A Methodical Model Reduction Proposed for Time-Efficient Finite Element Analysis of Larger Components in Selective Laser Melting.” Virtual and Physical Prototyping 9 (1): 17–25. doi:https://doi.org/10.1080/17452759.2013.868005.
- Peng, Tao, Karel Kellens, Renzhong Tang, Chao Chen, and Gang Chen. 2018. “Sustainability of Additive Manufacturing: An Overview on Its Energy Demand and Environmental Impact.” Additive Manufacturing 21 (April): 694–704. doi:https://doi.org/10.1016/j.addma.2018.04.022.
- Peng, Shitong, Tao Li, Jiali Zhao, Shengping Lv, George Z. Tan, Mengmeng Dong, and Hongchao Zhang. 2019. “Towards Energy and Material Efficient Laser Cladding Process: Modeling and Optimization Using a Hybrid TS-GEP Algorithm and the NSGA-II.” Journal of Cleaner Production 227: 58–69. doi:https://doi.org/10.1016/j.jclepro.2019.04.187.
- Pérez-Ruiz, José David, Luis Norberto López de Lacalle, Gorka Urbikain, Octavio Pereira, Silvia Martínez, and Jorge Bris. 2021. “On the Relationship Between Cutting Forces and Anisotropy Features in the Milling of LPBF Inconel 718 for Near Net Shape Parts.” International Journal of Machine Tools and Manufacture 172 (September), doi:https://doi.org/10.1016/j.ijmachtools.2021.103801.
- Pérez-Ruiz, José David, Felipe Marin, Silvia Martínez, Aitzol Lamikiz, Gorka Urbikain, and Luis Norberto López de Lacalle. 2022. “Stiffening Near-Net-Shape Functional Parts of Inconel 718 LPBF Considering Material Anisotropy and Subsequent Machining Issues.” Mechanical Systems and Signal Processing 168 (November 2021): 108675. doi:https://doi.org/10.1016/j.ymssp.2021.108675.
- Raghavan, S., Baicheng Zhang, Pei Wang, Chen-Nan Sun, Mui Ling Sharon Nai, Tao Li, and Jun Wei. 2017. ““Effect of Different Heat Treatments on the Microstructure and Mechanical Properties in Selective Laser Melted INCONEL 718 Alloy.”.” Materials and Manufacturing Processes 32 (14): 1588–1595. doi:https://doi.org/10.1080/10426914.2016.1257805.
- Rodrigues, Tiago A., J. D. Escobar, Jiajia Shen, Valdemar R. Duarte, G. G. Ribamar, Julian A. Avila, Emad Maawad, Norbert Schell, Telmo G. Santos, and J. P. Oliveira. 2021. “Effect of Heat Treatments on 316 Stainless Steel Parts Fabricated by Wire and Arc Additive Manufacturing: Microstructure and Synchrotron X-Ray Diffraction Analysis.” Additive Manufacturing 48 (PB): 102428. doi:https://doi.org/10.1016/j.addma.2021.102428.
- Rotella, G., O. W. Dillon, D. Umbrello, L. Settineri, and I. S. Jawahir. 2014. “The Effects of Cooling Conditions on Surface Integrity in Machining of Ti6Al4 V Alloy.” International Journal of Advanced Manufacturing Technology 71 (1–4): 47–55. doi:https://doi.org/10.1007/s00170-013-5477-9.
- Rotella G., Lu T., Settineri L., Dillon O.W., Jawahir I.S. (2012) Dry and Cryogenic Machining: Comparison from the Sustainability Perspective. In: Seliger G. (eds) Sustainable Manufacturing. Springer, Berlin, Heidelberg.
- Shao, S., M. M. Khonsari, S. Guo, W. J. Meng, and N. Li. 2019. “Overview: Additive Manufacturing Enabled Accelerated Design of Ni-Based Alloys for Improved Fatigue Life.” Additive Manufacturing 29 (October): 100779. doi:https://doi.org/10.1016/j.addma.2019.100779.
- Sing, S. L., C. N. Kuo, C. T. Shih, C. C. Ho, and C. K. Chua. 2021. “Perspectives of Using Machine Learning in Laser Powder Bed Fusion for Metal Additive Manufacturing.” Virtual and Physical Prototyping 16 (3): 372–386. doi:https://doi.org/10.1080/17452759.2021.1944229.
- Sing, S. L., and W. Y. Yeong. 2020. “Laser Powder Bed Fusion for Metal Additive Manufacturing: Perspectives on Recent Developments.” Virtual and Physical Prototyping 15 (3): 359–370. doi:https://doi.org/10.1080/17452759.2020.1779999.
- Singh, Ambrish, Sajan Kapil, and Manas Das. 2020. “A Comprehensive Review of the Methods and Mechanisms for Powder Feedstock Handling in Directed Energy Deposition.” Additive Manufacturing 35 (May): 101388. doi:https://doi.org/10.1016/j.addma.2020.101388.
- Song, Hyeyun, Tom McGaughy, Alber Sadek, and Wei Zhang. 2019. “Effect of Structural Support on Microstructure of Nickel Base Superalloy Fabricated by Laser-Powder Bed Fusion Additive Manufacturing.” Additive Manufacturing 26 (September 2018): 30–40. doi:https://doi.org/10.1016/j.addma.2018.12.017.
- Strondl, A., R. Fischer, G. Frommeyer, and A. Schneider. 2008. “Investigations of MX and Γ′/Γ″ Precipitates in the Nickel-Based Superalloy 718 Produced by Electron Beam Melting.” Materials Science and Engineering A 480 (1–2): 138–147. doi:https://doi.org/10.1016/j.msea.2007.07.012.
- Torres-Carrillo, Sharon, Héctor R. Siller, Carlos Vila, Cecilio López, and Ciro A. Rodríguez. 2020. “Environmental Analysis of Selective Laser Melting in the Manufacturing of Aeronautical Turbine Blades.” Journal of Cleaner Production 246. doi:https://doi.org/10.1016/j.jclepro.2019.119068.
- Tucho, Wakshum M., and Vidar Hansen. 2019. “Characterization of SLM-Fabricated Inconel 718 After Solid Solution and Precipitation Hardening Heat Treatments.” Journal of Materials Science 54 (1): 823–839. doi:https://doi.org/10.1007/s10853-018-2851-x.
- Wang, Zemin, Kai Guan, Ming Gao, Xiangyou Li, Xiaofeng Chen, and Xiaoyan Zeng. 2012. “The Microstructure and Mechanical Properties of Deposited-IN718 by Selective Laser Melting.” Journal of Alloys and Compounds 513: 518–523. doi:https://doi.org/10.1016/j.jallcom.2011.10.107.
- Watring, Dillon S., Kristen C. Carter, Dustin Crouse, Bart Raeymaekers, and Ashley D. Spear. 2019. “Mechanisms Driving High-Cycle Fatigue Life of as-Built Inconel 718 Processed by Laser Powder Bed Fusion.” Materials Science and Engineering A 761 (May): 137993. doi:https://doi.org/10.1016/j.msea.2019.06.003.
- Wilson, J. Michael, Cecil Piya, Yung C. Shin, Fu Zhao, and Karthik Ramani. 2014. “Remanufacturing of Turbine Blades by Laser Direct Deposition with Its Energy and Environmental Impact Analysis.” Journal of Cleaner Production 80: 70–178. doi:https://doi.org/10.1016/j.jclepro.2014.05.084.
- Wolff, Sarah J., Zhengtao Gan, Stephen Lin, Jennifer L. Bennett, Wentao Yan, Gregory Hyatt, Kornel F. Ehmann, Gregory J. Wagner, Wing Kam Liu, and Jian Cao. 2019. “Experimentally Validated Predictions of Thermal History and Microhardness in Laser-Deposited Inconel 718 on Carbon Steel.” Additive Manufacturing 27 (October 2018): 540–551. doi:https://doi.org/10.1016/j.addma.2019.03.019.
- Xu, Z., J. W. Murray, C. J. Hyde, and A. T. Clare. 2018. “Effect of Post Processing on the Creep Performance of Laser Powder Bed Fused Inconel 718.” Additive Manufacturing 24 (December): 486–497. doi:https://doi.org/10.1016/j.addma.2018.10.027.
- Yang, Shu, Domenico Umbrello, Oscar W. Dillon, David A. Puleo, and I. S. Jawahir. 2015. “Cryogenic Cooling Effect on Surface and Subsurface Microstructural Modifications in Burnishing of Co-Cr-Mo Biomaterial.” Journal of Materials Processing Technology 217: 211–221. doi:https://doi.org/10.1016/j.jmatprotec.2014.11.004.
- Yap, C. Y., C. K. Chua, and Z. L. Dong. 2016. “An Effective Analytical Model of Selective Laser Melting.” Virtual and Physical Prototyping 11 (1): 21–26. doi:https://doi.org/10.1080/17452759.2015.1133217.
- Yi, Li, Moritz Glatt, Tai Yen Thomas Kuo, Ankyd Ji, Bahram Ravani, and Jan C. Aurich. 2020. “A Method for Energy Modeling and Simulation Implementation of Machine Tools of Selective Laser Melting.” Journal of Cleaner Production 263. doi:https://doi.org/10.1016/j.jclepro.2020.121282.
- Yu, Xiaobin, Xin Lin, Fencheng Liu, Lilin Wang, Yao Tang, Jiacong Li, Shuya Zhang, and Weidong Huang. 2020. “Influence of Post-Heat-Treatment on the Microstructure and Fracture Toughness Properties of Inconel 718 Fabricated with Laser Directed Energy Deposition Additive Manufacturing.” Materials Science and Engineering A 798 (August): 140092. doi:https://doi.org/10.1016/j.msea.2020.140092.
- Zeng, Z., B. Q. Cong, J. P. Oliveira, W. C. Ke, N. Schell, B. Peng, Z. W. Qi, F. G. Ge, W. Zhang, and S. S. Ao. 2020. “Wire and Arc Additive Manufacturing of a Ni-Rich NiTi Shape Memory Alloy: Microstructure and Mechanical Properties.” Additive Manufacturing 32 (September 2019), doi:https://doi.org/10.1016/j.addma.2020.101051.
- Zhu, Yi, Tao Peng, Guofei Jia, Hong Zhang, Shuangmei Xu, and Huayong Yang. 2019. “Electrical Energy Consumption and Mechanical Properties of Selective-Laser-Melting-Produced 316L Stainless Steel Samples Using Various Processing Parameters.” Journal of Cleaner Production 208: 77–85. doi:https://doi.org/10.1016/j.jclepro.2018.10.109.