Microstructure tuning enables synergistic improvements in strength and ductility of wire-arc additive manufactured commercial Al-Zn-Mg-Cu alloys

References

• Attarilar, S., M. Ebrahimi, F. Djavanroodi, Y. Fu, L. Wang, and J. Yang. 2020. “3D Printing Technologies in Metallic Implants: A Thematic Review on the Techniques and Procedures.” International Journal of Bioprinting 7 (1): 306.
   PubMed Web of Science ®Google Scholar
• Chen, S., R. Gu, Q. Liu, W. Wang, and X. Wei. 2020. “Experimental and Numerical Investigation on Strengthening Behavior of 7075 Aluminum Alloy Sheets in Hot Forming–Quenching Integrated Process.” Journal of Manufacturing Science and Engineering 142 (6): 61005.
   Web of Science ®Google Scholar
• Croteau, J. R., S. Griffiths, M. D. Rossell, C. Leinenbach, C. Kenel, and V. Jansen. 2018. “Microstructure and Mechanical Properties of Al-Mg-Zr Alloys Processed by Selective Laser Melting.” Acta Materialia 153: 35–44.
   Web of Science ®Google Scholar
• Davis, J. R. 1993. Aluminum and Aluminum Alloys. Materials Park, OH: ASM International.
   Google Scholar
• Derekar, K. S., B. Ahmad, X. Zhang, S. S. Joshi, J. Lawrence, and L. Xu. 2022. “Effects of Process Variants on Residual Stresses in Wire Arc Additive Manufacturing of Aluminum Alloy 5183.” Journal of Manufacturing Science and Engineering 144: 7.
   Google Scholar
• Ding, J., P. Colegrove, J. Mehnen, S. Ganguly, P. M. Sequeira Almeida, and F. Wang. 2011. “Thermo-Mechanical Analysis of Wire and Arc Additive Layer Manufacturing Process on Large Multi-Layer Parts.” Computational Materials Science 50 (12): 3315–3322.
   Web of Science ®Google Scholar
• Dong, B., X. Cai, S. Lin, X. Li, C. Fan, and C. Yang. 2020. “Wire Arc Additive Manufacturing of Al-Zn-Mg-Cu Alloy: Microstructures and Mechanical Properties.” Additive Manufacturing 36: 101447.
   Web of Science ®Google Scholar
• Dong, B., X. Cai, Y. Xia, S. Lin, C. Fan, and F. Chen. 2021. “Effects of Interlayer Temperature on the Microstructures of Wire Arc Additive Manufactured Al-Zn-Mg-Cu Alloy: Insights Into Texture Responses and Dynamic Precipitation Behaviors.” Additive Manufacturing 48: 102453.
   Web of Science ®Google Scholar
• Fang, X., G. Chen, J. Yang, Y. Xie, K. Huang, and B. Lu. 2021. “Wire and Arc Additive Manufacturing of High-Strength Al–Zn–Mg Aluminum Alloy.” Frontiers in Materials 8: 656429.
   PubMed Web of Science ®Google Scholar
• Fu, R., S. Tang, J. Lu, Y. Cui, Z. Li, and H. Zhang. 2021. “Hot-Wire Arc Additive Manufacturing of Aluminum Alloy with Reduced Porosity and High Deposition Rate.” Materials & Design 199: 109370.
   Web of Science ®Google Scholar
• Guo, Y., Q. Han, J. Hu, X. Yang, P. Mao, and J. Wang. 2022. “Comparative Study on Wire-Arc Additive Manufacturing and Conventional Casting of Al–Si Alloys: Porosity, Microstructure and Mechanical Property.” Acta Metallurgica Sinica (English Letters) 35: 475–485.
   Web of Science ®Google Scholar
• Hauser, T., R. T. Reisch, P. P. Breese, B. S. Lutz, M. Pantano, and Y. Nalam. 2021. “Porosity in Wire Arc Additive Manufacturing of Aluminium Alloys.” Additive Manufacturing 41: 101993.
   Web of Science ®Google Scholar
• Huang, S., P. Kumar, W. Y. Yeong, R. L. Narayan, and U. Ramamurty. 2022. “Fracture Behavior of Laser Powder Bed Fusion Fabricated Ti41Nb via in-Situ Alloying.” Acta Materialia 225: 117593.
   Web of Science ®Google Scholar
• Khan, M. A., Y. Wang, M. Hamza, G. Yasin, M. Tabish, and C. Feng. 2021. “Precipitation Behaviour in an Al-Zn-Mg-Cu Alloy Subjected to High Strain Rate Compression Tests.” Materials Characterization 180: 111398.
   Web of Science ®Google Scholar
• Kim, J., X. Gao, and T. S. Srivatsan. 2004. “Modeling of Void Growth in Ductile Solids: Effects of Stress Triaxiality and Initial Porosity.” Engineering Fracture Mechanics 71 (3): 379–400.
   Web of Science ®Google Scholar
• Klein, T., G. Graf, P. Staron, A. Stark, H. Clemens, and P. Spoerk-Erdely. 2021a. “Microstructure Evolution Induced by the Intrinsic Heat Treatment Occurring During Wire-Arc Additive Manufacturing of an Al-Mg-Zn-Cu Crossover Alloy.” Materials Letters 303: 130500.
   Web of Science ®Google Scholar
• Klein, T., M. Schnall, B. Gomes, P. Warczok, D. Fleischhacker, and P. J. Morais. 2021b. “Wire-Arc Additive Manufacturing of a Novel High-Performance Al-Zn-Mg-Cu Alloy: Processing, Characterization and Feasibility Demonstration.” Additive Manufacturing 37: 101663.
   Web of Science ®Google Scholar
• Kürnsteiner, P., M. B. Wilms, A. Weisheit, B. Gault, E. A. Jägle, and D. Raabe. 2020. “High-Strength Damascus Steel by Additive Manufacturing.” Nature 582 (7813): 515–519.
   PubMed Web of Science ®Google Scholar
• Li, K., M. A. Klecka, S. Chen, and W. Xiong. 2021a. “Wire-Arc Additive Manufacturing and Post-Heat Treatment Optimization on Microstructure and Mechanical Properties of Grade 91 Steel.” Additive Manufacturing 37: 101734.
   Web of Science ®Google Scholar
• Li, S., J. Ning, G. Zhang, L. Zhang, J. Wu, and L. Zhang. 2021b. “Microstructural and Mechanical Properties of Wire-Arc Additively Manufactured Al–Zn–Mg Aluminum Alloy: The Comparison of as-Deposited and Heat-Treated Samples.” Vacuum 184: 109860.
   Web of Science ®Google Scholar
• Li, Z., K. G. Pradeep, Y. Deng, D. Raabe, and C. C. Tasan. 2016. “Metastable High-Entropy Dual-Phase Alloys Overcome the Strength–Ductility Trade-Off.” Nature 534: 227.
   PubMed Web of Science ®Google Scholar
• Li, R., M. Wang, Z. Li, P. Cao, T. Yuan, and H. Zhu. 2020a. “Developing a High-Strength Al-Mg-Si-Sc-Zr Alloy for Selective Laser Melting: Crack-Inhibiting and Multiple Strengthening Mechanisms.” Acta Materialia 193: 83–98.
   Web of Science ®Google Scholar
• Li, S., L. Zhang, J. Ning, X. Wang, G. Zhang, and J. Zhang. 2020b. “Microstructures and Mechanical Properties of Al–Zn–Mg Aluminium Alloy Samples Produced by Wire + Arc Additive Manufacturing.” Journal of Materials Research and Technology 9 (6): 13770–13780.
   Google Scholar
• Lin, T., C. Cao, M. Sokoluk, L. Jiang, X. Wang, and J. M. Schoenung. 2019. “Aluminum with Dispersed Nanoparticles by Laser Additive Manufacturing.” Nature Communications 10: 1.
   PubMed Web of Science ®Google Scholar
• Liu, D., D. Wu, G. Ma, C. Zhong, F. Niu, and A. Gasser. 2020. “Effect of Post-Deposition Heat Treatment on Laser-TIG Hybrid Additive Manufactured Al-Cu Alloy.” Virtual and Physical Prototyping 15 (4): 445–459.
   Web of Science ®Google Scholar
• Lu, T., C. Liu, Z. Li, Q. Wu, J. Wang, and T. Xu. 2020. “Hot-Wire Arc Additive Manufacturing Ti–6.5Al–2Zr–1Mo–1V Titanium Alloy: Pore Characterization, Microstructural Evolution, and Mechanical Properties.” Journal of Alloys and Compounds 817: 153334.
   Web of Science ®Google Scholar
• Ma, K., H. Wen, T. Hu, T. D. Topping, D. Isheim, and D. N. Seidman. 2014. “Mechanical Behavior and Strengthening Mechanisms in Ultrafine Grain Precipitation-Strengthened Aluminum Alloy.” Acta Materialia 62: 141–155.
   Web of Science ®Google Scholar
• Mao, X., Y. Yi, H. He, S. Huang, and W. Guo. 2020. “Second Phase Particles and Mechanical Properties of 2219 Aluminum Alloys Processed by an Improved Ring Manufacturing Process.” Materials Science and Engineering: A 781: 139226.
   Web of Science ®Google Scholar
• Martin, J. H., B. D. Yahata, J. M. Hundley, J. A. Mayer, T. A. Schaedler, and T. M. Pollock. 2017. “3D Printing of High-Strength Aluminium Alloys.” Nature 549 (7672): 365–369.
   PubMed Web of Science ®Google Scholar
• Miao, Q., D. Wu, D. Chai, Y. Zhan, G. Bi, and F. Niu. 2020. “Comparative Study of Microstructure Evaluation and Mechanical Properties of 4043 Aluminum Alloy Fabricated by Wire-Based Additive Manufacturing.” Materials & Design 186: 108205.
   Web of Science ®Google Scholar
• Morais, P. J., B. Gomes, P. Santos, M. Gomes, R. Gradinger, and M. Schnall. 2020. “Characterisation of a High-Performance Al–Zn–Mg–Cu Alloy Designed for Wire Arc Additive Manufacturing.” Materials 13 (7): 1610.
   Web of Science ®Google Scholar
• Peng, S., Y. Wei, and H. Gao. 2020. “Nanoscale Precipitates as Sustainable Dislocation Sources for Enhanced Ductility and High Strength.” Proceedings of the National Academy of Sciences 117 (10): 5204.
   PubMed Web of Science ®Google Scholar
• Qi, Z., B. Qi, B. Cong, H. Sun, G. Zhao, and J. Ding. 2019. “Microstructure and Mechanical Properties of Wire + Arc Additively Manufactured 2024 Aluminum Alloy Components: As-Deposited and Post Heat-Treated.” Journal of Manufacturing Processes 40: 27–36.
   Web of Science ®Google Scholar
• Ryan, E. M., T. J. Sabin, J. F. Watts, and M. J. Whiting. 2018. “The Influence of Build Parameters and Wire Batch on Porosity of Wire and Arc Additive Manufactured Aluminium Alloy 2319.” Journal of Materials Processing Technology 262: 577–584.
   Web of Science ®Google Scholar
• Samei, J., M. Amirmaleki, M. Shirinzadeh Dastgiri, C. Marinelli, and D. E. Green. 2019. “In-Situ X-Ray Tomography Analysis of the Evolution of Pores During Deformation of AlSi10Mg Fabricated by Selective Laser Melting.” Materials Letters 255: 126512.
   Web of Science ®Google Scholar
• Sha, G., and A. Cerezo. 2004. “Early-Stage Precipitation in Al–Zn–Mg–Cu Alloy (7050).” Acta Materialia 52 (15): 4503–4516.
   Web of Science ®Google Scholar
• She, H., D. Shu, W. Chu, J. Wang, and B. Sun. 2013. “Microstructural Aspects of Second Phases in As-Cast and Homogenized 7055 Aluminum Alloy with Different Impurity Contents.” Metallurgical and Materials Transactions A 44 (8): 3504–3510.
   Google Scholar
• Shimokawa, T., T. Niiyama, T. Miyaki, M. Ikeda, and K. Higashida. 2022. “A Novel Work Hardening Mechanism of Nanoscale Materials by Grain Boundary Transformation.” Acta Materialia 224: 117536.
   Google Scholar
• Sing, S. L., C. N. Kuo, C. T. Shih, C. C. Ho, and C. K. Chua. 2021. “Perspectives of Using Machine Learning in Laser Powder Bed Fusion for Metal Additive Manufacturing.” Virtual and Physical Prototyping 16 (3): 372–386.
   Web of Science ®Google Scholar
• Sokoluk, M., C. Cao, S. Pan, and X. Li. 2019. “Nanoparticle-Enabled Phase Control for Arc Welding of Unweldable Aluminum Alloy 7075.” Nature Communications 10: 1.
   PubMed Web of Science ®Google Scholar
• Suryawanshi, J., K. G. Prashanth, S. Scudino, J. Eckert, O. Prakash, and U. Ramamurty. 2016. “Simultaneous Enhancements of Strength and Toughness in an Al-12Si Alloy Synthesized Using Selective Laser Melting.” Acta Materialia 115: 285–294.
   Web of Science ®Google Scholar
• Teng, G. B., C. Y. Liu, Z. Y. Ma, W. B. Zhou, L. L. Wei, and Y. Chen. 2018. “Effects of Minor Sc Addition on the Microstructure and Mechanical Properties of 7055 Al Alloy During Aging.” Materials Science and Engineering: A 713: 61–66.
   Web of Science ®Google Scholar
• Teng, X., H. Mae, Y. Bai, and T. Wierzbicki. 2009. “Pore Size and Fracture Ductility of Aluminum Low Pressure Die Casting.” Engineering Fracture Mechanics 76 (8): 983–996.
   Web of Science ®Google Scholar
• Wang, W., Q. Pan, X. Wang, Y. Sun, L. Long, and Z. Huang. 2018. “Mechanical Properties and Microstructure Evolution of Ultra-High Strength Al-Zn-Mg-Cu Alloy Processed by Room Temperature ECAP with Post Aging.” Materials Science and Engineering: A 731: 195–208.
   Web of Science ®Google Scholar
• Xu, D., Z. Li, G. Wang, X. Li, X. Lv, and Y. Zhang. 2017. “Phase Transformation and Microstructure Evolution of an Ultra-High Strength Al-Zn-Mg-Cu Alloy During Homogenization.” Materials Characterization 131: 285–297.
   Web of Science ®Google Scholar
• Xue, C., Y. Zhang, P. Mao, C. Liu, Y. Guo, and F. Qian. 2021. “Improving Mechanical Properties of Wire Arc Additively Manufactured AA2196 Al–Li Alloy by Controlling Solidification Defects.” Additive Manufacturing 43: 102019.
   Web of Science ®Google Scholar
• Yu, Z., T. Yuan, M. Xu, H. Zhang, X. Jiang, and S. Chen. 2021. “Microstructure and Mechanical Properties of Al-Zn-Mg-Cu Alloy Fabricated by Wire + Arc Additive Manufacturing.” Journal of Manufacturing Processes 62: 430–439.
   Web of Science ®Google Scholar
• Zhang, X., Z. Xiao, W. Yu, C. K. Chua, L. Zhu, and Z. Wang. 2021. “Influence of Erbium Addition on the Defects of Selective Laser-Melted 7075 Aluminium Alloy.” Virtual and Physical Prototyping, Epub ahead of print. https://doi.org/https://doi.org/10.1080/17452759.2021.1990358.
   Google Scholar
• Zhong, H., B. Qi, B. Cong, Z. Qi, and H. Sun. 2019. “Microstructure and Mechanical Properties of Wire + Arc Additively Manufactured 2050 Al–Li Alloy Wall Deposits.” Chinese Journal of Mechanical Engineering 32: 1.
   Web of Science ®Google Scholar
• Zhou, Y., X. Lin, N. Kang, W. Huang, and Z. Wang. 2021. “Mechanical Properties and Precipitation Behavior of the Heat-Treated Wire + Arc Additively Manufactured 2219 Aluminum Alloy.” Materials Characterization 171: 110735.
   Web of Science ®Google Scholar
• Zhou, Y., X. Lin, N. Kang, W. Huang, J. Wang, and Z. Wang. 2020. “Influence of Travel Speed on Microstructure and Mechanical Properties of Wire + Arc Additively Manufactured 2219 Aluminum Alloy.” Journal of Materials Science & Technology 37: 143–153.
   Web of Science ®Google Scholar
• Zhu, Z., F. L. Ng, H. L. Seet, W. Lu, C. H. Liebscher, Z. Rao, et al. 2021. “Superior Mechanical Properties of a Selective-Laser-Melted AlZnMgCuScZr Alloy Enabled by a Tunable Hierarchical Microstructure and Dual-Nanoprecipitation.” Materials Today. Epub ahead of print. https://doi.org/https://doi.org/10.1016/j.mattod.2021.11.019
   Google Scholar