References
- AlMahri, S., R. Santiago, D. W. Lee, H. Ramos, H. Alabdouli, M. Alteneiji, Z. Guan, W. Cantwell, et al. 2021. “Evaluation of the Dynamic Response of Triply Periodic Minimal Surfaces Subjected to High Strain-Rate Compression.” Additive Manufacturing 46: 102220. doi:https://doi.org/10.1016/j.addma.2021.102220.
- Ashby, M. F. 2006. “The Properties of Foams and Lattices.” Philosophical Transactions of the Royal Society of London. Series A: Mathematical, Physical, and Engineering Sciences 364 (1838): 15–30. doi:https://doi.org/10.1098/rsta.2005.1678.
- Bai, L., C. Gong, X. Chen, Y. Sun, L. Xin, H. Pu, Y. Peng, et al. 2020a. “Mechanical Properties and Energy Absorption Capabilities of Functionally Graded Lattice Structures: Experiments and Simulations.” International Journal of Mechanical Sciences 182: 105735. doi:https://doi.org/10.1016/j.ijmecsci.2020.105735.
- Bai, L., J. Zhang, Y. Xiong, X. Chen, Y. Sun, C. Gong, H. Pu, et al. 2020b. “Influence of Unit Cell Pose on the Mechanical Properties of Ti6Al4V Lattice Structures Manufactured by Selective Laser Melting.” Additive Manufacturing 34: 101222. doi:https://doi.org/10.1016/j.addma.2020.101222.
- Brodnik, N. R., J. Schmidt, P. Colombo, and K. T. Faber. 2020. “Analysis of Multi-Scale Mechanical Properties of Ceramic Trusses Prepared from Preceramic Polymers.” Additive Manufacturing 31: 100957. doi:https://doi.org/10.1016/j.addma.2019.100957.
- Cao, X., D. Xiao, Y. Li, W. Wen, T. Zhao, Z. Chen, Y. Jiang, and D. Fang. 2020. “Dynamic Compressive Behavior of a Modified Additively Manufactured Rhombic Dodecahedron 316L Stainless Steel Lattice Structure.” Thin-Walled Structures 148: 106586. doi:https://doi.org/10.1016/j.tws.2019.106586.
- Dong, L. 2019. “Mechanical Response of Ti–6Al–4V Hierarchical Architected Metamaterials.” Acta Materialia 175: 90–106. doi:https://doi.org/10.1016/j.actamat.2019.06.004.
- Dong, L. 2020. “Mechanical Responses of Snap-Fit Ti-6Al-4V Warren-Truss Lattice Structures.” International Journal of Mechanical Sciences 173: 105460. doi:https://doi.org/10.1016/j.ijmecsci.2020.105460.
- Drücker, S., M. Schulze, H. Ipsen, L. Bandegani, H. Hoch, M. Kluge, and B. Fiedler. 2021. “Experimental and Numerical Mechanical Characterization of Additively Manufactured Ti6Al4V Lattice Structures Considering Progressive Damage.” International Journal of Mechanical Sciences 189: 105986. doi:https://doi.org/10.1016/j.ijmecsci.2020.105986.
- Duan, Y., B. Du, X. Shi, B. Hou, and Y. Li. 2019. “Quasi-Static and Dynamic Compressive Properties and Deformation Mechanisms of 3D Printed Polymeric Cellular Structures with Kelvin Cells.” International Journal of Impact Engineering 132: 103303. doi:https://doi.org/10.1016/j.ijimpeng.2019.05.017.
- Duan, S., W. Wen, and D. Fang. 2020. “Additively-Manufactured Anisotropic and Isotropic 3D Plate-Lattice Materials for Enhanced Mechanical Performance: Simulations & Experiments.” Acta Materialia 199: 397–412. doi:https://doi.org/10.1016/j.actamat.2020.08.063.
- Fang, Z., Y. Ding, Y. Jiang, Y. Zheng, Z. Wang, and F. Zhou. 2021. “Failure Mode Analysis of Stiffness-Guided Lattice Structures Under Quasi-Static and Dynamic Compressions.” Composite Structures 275: 114414. doi:https://doi.org/10.1016/j.compstruct.2021.114414.
- Feng, Y., X. Guo, K. Huang, H. Elsayed, G. Franchin, H. Gong, and P. Colombo. 2021. “Enhanced Electromagnetic Microwave Absorption of SiOC Ceramics Targeting the Integration of Structure and Function.” Journal of the European Ceramic Society 41 (13): 6393–6405. doi:https://doi.org/10.1016/j.jeurceramsoc.2021.06.007.
- Habib, F., P. Iovenitti, S. Masood, M. Nikzad, and D. Ruan. 2019. “Design and Evaluation of 3D Printed Polymeric Cellular Materials for Dynamic Energy Absorption.” The International Journal of Advanced Manufacturing Technology 103 (5–8): 2347–2361. doi:https://doi.org/10.1007/s00170-019-03541-4.
- He, C., C. Ma, X. Li, L. Yan, F. Hou, J. Liu, and A. Guo. 2020. “Polymer-Derived SiOC Ceramic Lattice with Thick Struts Prepared by Digital Light Processing.” Additive Manufacturing 35: 101366. doi:https://doi.org/10.1016/j.addma.2020.101366.
- Huang, K., H. Elsayed, G. Franchin, and P. Colombo. 2021. “Additive Manufacturing of SiOC Scaffolds with Tunable Structure-Performance Relationship.” Journal of the European Ceramic Society 41 (15): 7552–7559. doi:https://doi.org/10.1016/j.jeurceramsoc.2021.08.043.
- Huang, Y., Y. Xue, X. Wang, and F. Han. 2017a. “Effect of Cross Sectional Shape of Struts on the Mechanical Properties of Aluminum Based Pyramidal Lattice Structures.” Materials Letters 202: 55–58. doi:https://doi.org/10.1016/j.matlet.2017.05.073.
- Huang, Y., Y. Xue, X. Wang, and F. Han. 2017b. “Mechanical Behavior of Three-Dimensional Pyramidal Aluminum Lattice Materials.” Materials Science & Engineering: A 696: 520–528. doi:https://doi.org/10.1016/j.msea.2017.04.053.
- Jana, P., O. Santoliquido, A. Ortona, P. Colombo, and G. D. Sorarù. 2018. “Polymer-Derived SiCN Cellular Structures from Replica of 3D Printed Lattices.” Journal of the American Ceramic Society 101 (7): 2732–2738. doi:https://doi.org/10.1111/jace.15533.
- Jin, N., F. Wang, Y. Wang, B. Zhang, H. Cheng, and H. Zhang. 2019a. “Effect of Structural Parameters on Mechanical Properties of Pyramidal Kagome Lattice Material Under Impact Loading.” International Journal of Impact Engineering 132: 103313. doi:https://doi.org/10.1016/j.ijimpeng.2019.06.002.
- Jin, N., F. Wang, Y. Wang, B. Zhang, H. Cheng, and H. Zhang. 2019b. “Failure and Energy Absorption Characteristics of Four Lattice Structures Under Dynamic Loading.” Materials & Design 169: 107655. doi:https://doi.org/10.1016/j.matdes.2019.107655.
- Kaur, M., T. G. Yun, S. M. Han, E. L. Thomas, and W. S. Kim. 2017. “3D Printed Stretching-Dominated Micro-Trusses.” Materials & Design 134: 272–280. doi:https://doi.org/10.1016/j.matdes.2017.08.061.
- Leary, M., M. Mazur, H. Williams, E. Yang, A. Alghamdi, B. Lozanovski, X. Zhang, et al. 2018. “Inconel 625 Lattice Structures Manufactured by Selective Laser Melting (SLM): Mechanical Properties, Deformation and Failure Modes.” Materials & Design 157: 179–199. doi:https://doi.org/10.1016/j.matdes.2018.06.010.
- Li, Z., Z. Chen, J. Liu, Y. Fu, C. Liu, P. Wang, M. Jiang, and C. Lao. 2020. “Additive Manufacturing of Lightweight and High-Strength Polymer-Derived SiOC Ceramics.” Virtual and Physical Prototyping 15 (2): 163–177. doi:https://doi.org/10.1080/17452759.2019.1710919.
- Li, S., M. Hu, L. Xiao, and W. Song. 2020. “Compressive Properties and Collapse Behavior of Additively-Manufactured Layered-Hybrid Lattice Structures Under Static and Dynamic Loadings.” Thin-Walled Structures 157: 107153. doi:https://doi.org/10.1016/j.tws.2020.107153.
- Li, Z., Y. Nie, B. Liu, Z. Kuai, M. Zhao, and F. Liu. 2020. “Mechanical Properties of AlSi10Mg Lattice Structures Fabricated by Selective Laser Melting.” Materials & Design 192: 108709. doi:https://doi.org/10.1016/j.matdes.2020.108709.
- Li, X., L. Xiao, and W. Song. 2021. “Compressive Behavior of Selective Laser Melting Printed Gyroid Structures Under Dynamic Loading.” Additive Manufacturing 46: 102054. doi:https://doi.org/10.1016/j.addma.2021.102054.
- Li, Q., X. Zhi, and F. Fan. 2022. “Quasi-static Compressive Behaviour of 3D-Printed Origami-Inspired Cellular Structure: Experimental, Numerical and Theoretical Studies.” Virtual and Physical Prototyping 17 (1): 69–91. doi:https://doi.org/10.1080/17452759.2021.1987051.
- Ling, C., A. Cernicchi, M. D. Gilchrist, and P. Cardiff. 2019. “Mechanical Behaviour of Additively-Manufactured Polymeric Octet-Truss Lattice Structures Under Quasi-Static and Dynamic Compressive Loading.” Materials & Design 162: 106–118. doi:https://doi.org/10.1016/j.matdes.2018.11.035.
- Liu, W., H. Song, and C. Huang. 2020. “Maximizing Mechanical Properties and Minimizing Support Material of PolyJet Fabricated 3D Lattice Structures.” Additive Manufacturing 35: 101257. doi:https://doi.org/10.1016/j.addma.2020.101257.
- Mei, H., Y. Tan, W. Huang, P. Chang, Y. and Fan, and L. Cheng. 2021. “Structure Design Influencing the Mechanical Performance of 3D Printing Porous Ceramics.” Ceramics International 47 (6): 8389–8397. doi:https://doi.org/10.1016/j.ceramint.2020.11.203.
- Mei, H., R. Zhao, Y. Xia, J. Du, X. Wang, and L. Cheng. 2019. “Ultrahigh Strength Printed Ceramic Lattices.” Journal of Alloys and Compounds 797 (797): 786–796. doi:https://doi.org/10.1016/j.jallcom.2019.05.117.
- Minasyan, T., L. Liu, Y. Holovenko, S. Aydinyan, and I. Hussainova. 2019. “Additively Manufactured Mesostructured MoSi2-Si3N4 Ceramic Lattice.” Ceramics International 45 (8): 9926–9933. doi:https://doi.org/10.1016/j.ceramint.2019.02.035.
- Novak, N., O. Al-Ketan, L. Krstulović-Opara, R. Rowshan, R. K. Abu Al-Rub, M. Vesenjak, and Z. Ren. 2021. “Quasi-Static and Dynamic Compressive Behaviour of Sheet TPMS Cellular Structures.” Composite Structures 266: 113801. doi:https://doi.org/10.1016/j.compstruct.2021.113801.
- Plocher, J., and A. Panesar. 2020. “Effect of Density and Unit Cell Size Grading on the Stiffness and Energy Absorption of Short Fibre-Reinforced Functionally Graded Lattice Structures.” Additive Manufacturing 33: 101171. doi:https://doi.org/10.1016/j.addma.2020.101171.
- Shen, M., W. Qin, B. Xing, W. Zhao, S. Gao, Y. Sun, T. Jiao, et al. 2021. “Mechanical Properties of 3D Printed Ceramic Cellular Materials with Triply Periodic Minimal Surface Architectures.” Journal of the European Ceramic Society 41 (2): 1481–1489. doi:https://doi.org/10.1016/j.jeurceramsoc.2020.09.062.
- Shen, M., C. Wang, and Z. Zhao. 2019. “Mechanical Properties of ZrO2 TPMS Structures Prepared by DLP 3D Printing.” IOP Conference Series: Materials Science and Engineering 678 (1): 12017. doi:https://doi.org/10.1088/1757-899X/678/1/012017.
- Smith, M., Z. Guan, and W. J. Cantwell. 2013. “Finite Element Modelling of the Compressive Response of Lattice Structures Manufactured Using the Selective Laser Melting Technique.” International Journal of Mechanical Sciences 67: 28–41. doi:https://doi.org/10.1016/j.ijmecsci.2012.12.004.
- Tancogne-Dejean, T., A. B. Spierings, and D. Mohr. 2016. “Additively-Manufactured Metallic Micro-Lattice Materials for High Specific Energy Absorption Under Static and Dynamic Loading.” Acta Materialia 116: 14–28. doi:https://doi.org/10.1016/j.actamat.2016.05.054.
- Xue, Y., W. Wang, and F. Han. 2019. “Enhanced Compressive Mechanical Properties of Aluminum Based Auxetic Lattice Structures Filled with Polymers.” Composites Part B: Engineering 171: 183–191. doi:https://doi.org/10.1016/j.compositesb.2019.05.002.
- Yao, Y., W. Qin, B. Xing, N. Sha, T. Jiao, and Z. Zhao. 2021. “High Performance Hydroxyapatite Ceramics and a Triply Periodic Minimum Surface Structure Fabricated by Digital Light Processing 3D Printing.” Journal of Advanced Ceramics 10 (1): 39–48. doi:https://doi.org/10.1007/s40145-020-0415-4.
- Ye, G., H. Bi, and Y. Hu. 2020. “Compression Behaviors of 3D Printed Pyramidal Lattice Truss Composite Structures.” Composite Structures 233: 111706. doi:https://doi.org/10.1016/j.compstruct.2019.111706.
- Yin, S., H. Chen, J. Li, T. X. Yu, and J. Xu. 2019. “Effects of Architecture Level on Mechanical Properties of Hierarchical Lattice Materials.” International Journal of Mechanical Sciences 157–158: 282–292. doi:https://doi.org/10.1016/j.ijmecsci.2019.04.051.
- Zeng, Q., C. Yang, D. Tang, J. Li, Z. Feng, J. Liu, and K. Guan. 2019. “Additive Manufacturing Alumina Components with Lattice Structures by Digital Light Processing Technique.” Journal of Materials Science & Technology 35 (12): 2751–2755. doi:https://doi.org/10.1016/j.jmst.2019.08.001.
- Zhang, K., C. Xie, G. Wang, R. He, G. Ding, M. Wang, D. Dai, and D. Fang. 2019. “High Solid Loading, Low Viscosity Photosensitive Al2O3 Slurry for Stereolithography Based Additive Manufacturing.” Ceramics International 45 (1): 203–208. doi:https://doi.org/10.1016/j.ceramint.2018.09.152.
- Zhao, W., C. Wang, B. Xing, M. Shen, and Z. Zhao. 2020. “Mechanical Properties of Zirconia Octet Truss Structures Fabricated by DLP 3D Printing.” Materials Research Express 7 (8): 85201. doi:https://doi.org/10.1088/2053-1591/aba643.