References
- Afrasiabi, Mohamadreza, Christof Lüthi, Markus Bambach, and Konrad Wegener. 2021. “Multi-Resolution SPH Simulation of a Laser Powder Bed Fusion Additive Manufacturing Process.” Applied Sciences 11 (7): 2962. https://doi.org/https://doi.org/10.3390/app11072962.
- Agrawal, Ankur Kumar, Gabriel Meric de Bellefon, and Dan Thoma. 2020. “High-Throughput Experimentation for Microstructural Design in Additively Manufactured 316L Stainless Steel.” Materials Science and Engineering: A 793 (August): 139841. https://doi.org/https://doi.org/10.1016/j.msea.2020.139841.
- AlFaify, Abdullah, James Hughes, and Keith Ridgway. 2019. “Controlling the Porosity of 316L Stainless Steel Parts Manufactured via the Powder Bed Fusion Process.” Rapid Prototyping Journal 25 (1): 162–175. https://doi.org/https://doi.org/10.1108/RPJ-11-2017-0226.
- Ammer, Regina, Matthias Markl, Ulric Ljungblad, Carolin Körner, and Ulrich Rüde. 2014. “Simulating Fast Electron Beam Melting with a Parallel Thermal Free Surface Lattice Boltzmann Method.” Computers & Mathematics with Applications. Mesoscopic Methods for Engineering and Science (Proceedings of ICMMES-2012, Taipei, Taiwan, 23–27 July 2012) 67 (2): 318–330. https://doi.org/https://doi.org/10.1016/j.camwa.2013.10.001.
- Anwar, Ahmad Bin, Imran Halimi Ibrahim, and Quang-Cuong Pham. 2019. “Spatter Transport by Inert Gas Flow in Selective Laser Melting: A Simulation Study.” Powder Technology 352 (June): 103–116. https://doi.org/https://doi.org/10.1016/j.powtec.2019.04.044.
- Bao, Hongyixi, Shengchuan Wu, Zhengkai Wu, Guozheng Kang, Xin Peng, and Philip J. Withers. 2021. “A Machine-Learning Fatigue Life Prediction Approach of Additively Manufactured Metals.” Engineering Fracture Mechanics 242 (February): 107508. https://doi.org/https://doi.org/10.1016/j.engfracmech.2020.107508.
- Bertocco, A., L. Esposito, A. Aurino, D. Borrelli, and A. Caraviello. 2021. “Influence of SLM Parameters on the Compressive Behaviour of Lattice Structures in 17-4PH Stainless Steel.” IOP Conference Series: Materials Science and Engineering 1038 (1): 012035. https://doi.org/https://doi.org/10.1088/1757-899X/1038/1/012035.
- Bian, Peiying, Xiaodong Shao, and Jingli Du. 2019. “Finite Element Analysis of Thermal Stress and Thermal Deformation in Typical Part during SLM.” Applied Sciences 9 (11): 2231. https://doi.org/https://doi.org/10.3390/app9112231.
- Bidare, P., I. Bitharas, R. M. Ward, M. M. Attallah, and A. J. Moore. 2018. “Fluid and Particle Dynamics in Laser Powder Bed Fusion.” Acta Materialia 142 (January): 107–120. https://doi.org/https://doi.org/10.1016/j.actamat.2017.09.051.
- Bierwisch, Claas. 2019. “DEM Powder Spreadingand SPH Powder Melting Models for Additive Manufacturing Processsimulations.” CIMNE. https://upcommons.upc.edu/handle/2117/186634.
- Brika, Salah Eddine, Morgan Letenneur, Christopher Alex Dion, and Vladimir Brailovski. 2020. “Influence of Particle Morphology and Size Distribution on the Powder Flowability and Laser Powder Bed Fusion Manufacturability of Ti-6Al-4V Alloy.” Additive Manufacturing 31 (January): 100929. https://doi.org/https://doi.org/10.1016/j.addma.2019.100929.
- Cao, Liu. 2019a. “Numerical Simulation of the Impact of Laying Powder on Selective Laser Melting Single-Pass Formation.” International Journal of Heat and Mass Transfer 141 (October): 1036–1048. https://doi.org/https://doi.org/10.1016/j.ijheatmasstransfer.2019.07.053.
- Cao, Liu. 2019b. “Study on the Numerical Simulation of Laying Powder for the Selective Laser Melting Process.” The International Journal of Advanced Manufacturing Technology 105 (5–6): 2253–2269. https://doi.org/https://doi.org/10.1007/s00170-019-04440-4.
- Cao, Liu. 2021a. “Mesoscopic-Scale Numerical Investigation Including the Inuence of Process Parameters on LPBFMulti-Layer Multi-Path Formation.” Computer Modeling in Engineering & Sciences 126 (1): 5–23. https://doi.org/https://doi.org/10.32604/cmes.2021.014693.
- Cao, Liu. 2021b. “Numerical Investigation on Molten Pool Dynamics during Multi-Laser Array Powder Bed Fusion Process.” Metallurgical and Materials Transactions A 52 (1): 211–227. https://doi.org/https://doi.org/10.1007/s11661-020-06076-6.
- Cao, Liu. 2021c. “Workpiece-Scale Numerical Simulations of SLM Molten Pool Dynamic Behavior of 316L Stainless Steel.” Computers & Mathematics with Applications 96 (August): 209–228. https://doi.org/https://doi.org/10.1016/j.camwa.2020.04.020.
- Cao, Liu, and Wei Guan. 2021. “Simulation and Analysis of LPBF Multi-Layer Single-Track Forming Process Under Different Particle Size Distributions.” The International Journal of Advanced Manufacturing Technology 114 (7–8): 2141–2157. https://doi.org/https://doi.org/10.1007/s00170-021-06987-7.
- Carter, L. N., X. Wang, N. Read, R. Khan, M. Aristizabal, and K. Essa. 2016. “Process Optimisation of Selective Laser Melting Using Energy Density Model for Nickel Based Superalloys.” Materials Science and Technology 32 (7): 657–661. https://doi.org/https://doi.org/10.1179/1743284715Y.0000000108.
- Cattenone, Alberto, Simone Morganti, and Ferdinando Auricchio. 2020. “Basis of the Lattice Boltzmann Method for Additive Manufacturing.” Archives of Computational Methods in Engineering 27 (4): 1109–1133. https://doi.org/https://doi.org/10.1007/s11831-019-09347-7.
- Chen, Hui, and Wentao Yan. 2020. “Spattering and Denudation in Laser Powder Bed Fusion Process: Multiphase Flow Modelling.” Acta Materialia 196 (September): 154–167. https://doi.org/https://doi.org/10.1016/j.actamat.2020.06.033.
- Concli, Franco, Andrea Gilioli, and Filippo Nalli. 2021. “Experimental–Numerical Assessment of Ductile Failure of Additive Manufacturing Selective Laser Melting Reticular Structures Made of Al A357.” Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 235 (10): 1909–1916. https://doi.org/https://doi.org/10.1177/0954406219832333.
- Cordova, Laura, Ton Bor, Marc de Smit, Simone Carmignato, Mónica Campos, and Tiedo Tinga. 2020. “Effects of Powder Reuse on the Microstructure and Mechanical Behaviour of Al–Mg–Sc–Zr Alloy Processed by Laser Powder Bed Fusion (LPBF).” Additive Manufacturing 36 (December): 101625. https://doi.org/https://doi.org/10.1016/j.addma.2020.101625.
- Costas, Miguel, David Morin, Mario de Lucio, and Magnus Langseth. 2020. “Testing and Simulation of Additively Manufactured AlSi10Mg Components Under Quasi-Static Loading.” European Journal of Mechanics – A/Solids 81 (May): 103966. https://doi.org/https://doi.org/10.1016/j.euromechsol.2020.103966.
- Dao, My Ha, and Jing Lou. 2021. “Simulations of Laser Assisted Additive Manufacturing by Smoothed Particle Hydrodynamics.” Computer Methods in Applied Mechanics and Engineering 373 (January): 113491. https://doi.org/https://doi.org/10.1016/j.cma.2020.113491.
- Dietrich, S., M. Wunderer, A. Huissel, and M. F. Zaeh. 2016. “A New Approach for a Flexible Powder Production for Additive Manufacturing.” Procedia Manufacturing, 16th Machining Innovations Conference for Aerospace Industry – MIC 2016, 6 (January): 88–95. https://doi.org/https://doi.org/10.1016/j.promfg.2016.11.012.
- Foroozmehr, Ali, Mohsen Badrossamay, Ehsan Foroozmehr, and Sa’id Golabi. 2016. “Finite Element Simulation of Selective Laser Melting Process Considering Optical Penetration Depth of Laser in Powder Bed.” Materials & Design 89 (January): 255–263. https://doi.org/https://doi.org/10.1016/j.matdes.2015.10.002.
- Fürstenau, Jan-Philipp, Henning Wessels, Christian Weißenfels, and Peter Wriggers. 2020. “Generating Virtual Process Maps of SLM Using Powder-Scale SPH Simulations.” Computational Particle Mechanics 7 (4): 655–677. https://doi.org/https://doi.org/10.1007/s40571-019-00296-3.
- Gao, Xuesong, Guilherme Abreu Faria, Wei Zhang, and Kevin R. Wheeler. 2020. “Numerical Analysis of Non-Spherical Particle Effect on Molten Pool Dynamics in Laser-Powder Bed Fusion Additive Manufacturing.” Computational Materials Science 179 (June): 109648. https://doi.org/https://doi.org/10.1016/j.commatsci.2020.109648.
- Giganto, Sara, Susana Martínez-Pellitero, Joaquín Barreiro, and Pablo Zapico. 2022. “Influence of 17-4 PH Stainless Steel Powder Recycling on Properties of SLM Additive Manufactured Parts.” Journal of Materials Research and Technology 16 (January): 1647–1658. https://doi.org/https://doi.org/10.1016/j.jmrt.2021.12.089.
- Gong, Xibing, and Kevin Chou. 2015. “Phase-Field Modeling of Microstructure Evolution in Electron Beam Additive Manufacturing.” JOM Journal of the Minerals Metals and Materials Society 67 (5): 1176–1182. https://doi.org/https://doi.org/10.1007/s11837-015-1352-5.
- Gu, Heng, Chao Wei, Lin Li, Quanquan Han, Rossitza Setchi, Michael Ryan, and Qian Li. 2020. “Multi-Physics Modelling of Molten Pool Development and Track Formation in Multi-Track, Multi-Layer and Multi-Material Selective Laser Melting.” International Journal of Heat and Mass Transfer 151 (April): 119458. https://doi.org/https://doi.org/10.1016/j.ijheatmasstransfer.2020.119458.
- Haeri, S. 2017. “Optimisation of Blade Type Spreaders for Powder Bed Preparation in Additive Manufacturing Using DEM Simulations.” Powder Technology 321 (November): 94–104. https://doi.org/https://doi.org/10.1016/j.powtec.2017.08.011.
- Han, Quanquan, Rossitza Setchi, and Sam L. Evans. 2016. “Synthesis and Characterisation of Advanced Ball-Milled Al-Al2O3 Nanocomposites for Selective Laser Melting.” Powder Technology 297 (September): 183–192. https://doi.org/https://doi.org/10.1016/j.powtec.2016.04.015.
- Hu, Haoyue, Florian Fetzer, Peter Berger, and Peter Eberhard. 2016. “Simulation of Laser Welding Using Advanced Particle Methods: Simulation of Laser Welding Using Advanced Particle Methods.” GAMM-Mitteilungen 39 (2): 149–169. https://doi.org/https://doi.org/10.1002/gamm.201610010.
- Jafari, Davoud, Wessel W. Wits, Tom H. J. Vaneker, Ali Gökhan Demir, Barbara Previtali, Bernard J. Geurts, and Ian Gibson. 2020. “Pulsed Mode Selective Laser Melting of Porous Structures: Structural and Thermophysical Characterization.” Additive Manufacturing 35 (October): 101263. https://doi.org/https://doi.org/10.1016/j.addma.2020.101263.
- Jiang, Junjie, Jianming Chen, Zhihao Ren, Zhongfa Mao, Xiangyu Ma, and David Z. Zhang. 2020. “The Influence of Process Parameters and Scanning Strategy on Lower Surface Quality of TA15 Parts Fabricated by Selective Laser Melting.” Metals 10 (9): 1228. https://doi.org/https://doi.org/10.3390/met10091228.
- Khairallah, Saad A., Andrew T. Anderson, Alexander Rubenchik, and Wayne E. King. 2016. “Laser Powder-Bed Fusion Additive Manufacturing: Physics of Complex Melt Flow and Formation Mechanisms of Pores, Spatter and Denudation Zones.” Acta Materialia 108 (April): 36–45. https://doi.org/https://doi.org/10.1016/j.actamat.2016.02.014.
- Khairallah, Saad A., Aiden A. Martin, Jonathan R. I. Lee, Gabe Guss, Nicholas P. Calta, Joshua A. Hammons, Michael H. Nielsen, et al. 2020. “Controlling Interdependent Meso-Nanosecond Dynamics and Defect Generation in Metal 3D Printing.” Science 368 (6491): 660–665. https://doi.org/https://doi.org/10.1126/science.aay7830.
- Koeppe, Arnd, Carlos Alberto Hernandez Padilla, Maximilian Voshage, Johannes Henrich Schleifenbaum, and Bernd Markert. 2018. “Efficient Numerical Modeling of 3D-Printed Lattice-Cell Structures Using Neural Networks.” Manufacturing Letters 15 (January): 147–150. https://doi.org/https://doi.org/10.1016/j.mfglet.2018.01.002.
- Korkmaz, Mehmet Erdi, Munish Kumar Gupta, Saad Waqar, Mustafa Kuntoğlu, Grzegorz M. Krolczyk, Radosław W Maruda, and Danil Yu Pimenov. 2022. “A Short Review on Thermal Treatments of Titanium & Nickel Based Alloys Processed by Selective Laser Melting.” Journal of Materials Research and Technology 16 (January): 1090–1101. https://doi.org/https://doi.org/10.1016/j.jmrt.2021.12.061.
- Kurzynowski, Tomasz, Edward Chlebus, Bogumiła Kuźnicka, and Jacek Reiner. 2012. ““Parameters in Selective Laser Melting for Processing Metallic Powders.” High Power Laser Materials Processing: Lasers, Beam Delivery, Diagnostics, and Applications 8239: 823914. International Society for Optics and Photonics. https://doi.org/https://doi.org/10.1117/12.907292.
- Kusoglu, Ihsan Murat, Bilal Gökce, and Stephan Barcikowski. 2020. “Research Trends in Laser Powder Bed Fusion of Al Alloys within the Last Decade.” Additive Manufacturing 36 (December): 101489. https://doi.org/https://doi.org/10.1016/j.addma.2020.101489.
- Le, Trong-Nhan, Yu-Lung Lo, and Ze-Hong Lin. 2020. “Numerical Simulation and Experimental Validation of Melting and Solidification Process in Selective Laser Melting of IN718 Alloy.” Additive Manufacturing 36 (December): 101519. https://doi.org/https://doi.org/10.1016/j.addma.2020.101519.
- Lee, Yousub, A. Kate Gurnon, David Bodner, and Srdjan Simunovic. 2020. “Effect of Particle Spreading Dynamics on Powder Bed Quality in Metal Additive Manufacturing.” Integrating Materials and Manufacturing Innovation 9 (4): 410–422. https://doi.org/https://doi.org/10.1007/s40192-020-00193-1.
- Li, Jingchang, Longchao Cao, Jie Xu, Shengyi Wang, and Qi Zhou. 2022. “In Situ Porosity Intelligent Classification of Selective Laser Melting Based on Coaxial Monitoring and Image Processing.” Measurement 187 (January): 110232. https://doi.org/https://doi.org/10.1016/j.measurement.2021.110232.
- Li, Jingchang, Jiexiang Hu, Longchao Cao, Shengyi Wang, Huaping Liu, and Qi Zhou. 2021. “Multi-Objective Process Parameters Optimization of SLM Using the Ensemble of Metamodels.” Journal of Manufacturing Processes 68 (August): 198–209. https://doi.org/https://doi.org/10.1016/j.jmapro.2021.05.038.
- Li, Yingli, Kun Zhou, Pengfei Tan, Shu Beng Tor, Chee Kai Chua, and Kah Fai Leong. 2018. “Modeling Temperature and Residual Stress Fields in Selective Laser Melting.” International Journal of Mechanical Sciences 136 (February): 24–35. https://doi.org/https://doi.org/10.1016/j.ijmecsci.2017.12.001.
- Lindroos, Matti, Tatu Pinomaa, Atte Antikainen, Juha Lagerbom, Joni Reijonen, Tomi Lindroos, Tom Andersson, and Anssi Laukkanen. 2021. “Micromechanical Modeling Approach to Single Track Deformation, Phase Transformation and Residual Stress Evolution during Selective Laser Melting Using Crystal Plasticity.” Additive Manufacturing 38 (February): 101819. https://doi.org/https://doi.org/10.1016/j.addma.2020.101819.
- Liu, Dehao. 2021. “Investigation of Process-Structure Relationship for Additive Manufacturing with Multiphysics Simulation and Physics-Constrained Machine Learning.” Georgia Institute of Technology. https://scholar.google.com/citations?view_op=view_citation&hl=en&user=udTKihQAAAAJ&citation_for_view=udTKihQAAAAJ:MXK_kJrjxJIC.
- Liu, Binqi, Gang Fang, Liping Lei, and Wei Liu. 2020. “A New Ray Tracing Heat Source Model for Mesoscale CFD Simulation of Selective Laser Melting (SLM).” Applied Mathematical Modelling 79 (March): 506–520. https://doi.org/https://doi.org/10.1016/j.apm.2019.10.049.
- Markl, Matthias. 2015. Numerical Modeling and Simulation of Selective Electron Beam Melting Using a Coupled Lattice Boltzmann and Discrete Element Method. Erlangen, Germany: Der Technischen Fakultät: Friedrich-Alexander-Universität.
- Mercelis, Peter, and Jean-Pierre Kruth. 2006. “Residual Stresses in Selective Laser Sintering and Selective Laser Melting.” Rapid Prototyping Journal 12 (5): 254–265. https://doi.org/https://doi.org/10.1108/13552540610707013.
- Moeinfar, Kh, F. Khodabakhshi, S. F. Kashani-bozorg, M. Mohammadi, and A. P. Gerlich. 2022. “A Review on Metallurgical Aspects of Laser Additive Manufacturing (LAM): Stainless Steels,: Nickel Superalloys, and Titanium Alloys.” Journal of Materials Research and Technology 16 (January): 1029–1068. https://doi.org/https://doi.org/10.1016/j.jmrt.2021.12.039.
- Mohd Yusuf, Shahir, Edmund Choo, and Nong Gao. 2020. “Comparison between Virgin and Recycled 316L SS and AlSi10Mg Powders Used for Laser Powder Bed Fusion Additive Manufacturing.” Metals 10 (12): 1625. https://doi.org/https://doi.org/10.3390/met10121625.
- Moser, Daniel, Michael Cullinan, and Jayathi Murthy. 2019. “Multi-Scale Computational Modeling of Residual Stress in Selective Laser Melting with Uncertainty Quantification.” Additive Manufacturing 29 (October): 100770. https://doi.org/https://doi.org/10.1016/j.addma.2019.06.021.
- Moser, Daniel, Sreekanth Pannala, and Jayathi Murthy. 2016. “Computation of Effective Thermal Conductivity of Powders for Selective Laser Sintering Simulations.” Journal of Heat Transfer 138 (8), 15–1397. https://doi.org/https://doi.org/10.1115/1.4033351.
- Mukherjee, T., and T. DebRoy. 2018. “Mitigation of Lack of Fusion Defects in Powder Bed Fusion Additive Manufacturing.” Journal of Manufacturing Processes 36 (December): 442–449. https://doi.org/https://doi.org/10.1016/j.jmapro.2018.10.028.
- Mukherjee, T., H. L. Wei, A. De, and T. DebRoy. 2018. “Heat and Fluid Flow in Additive Manufacturing—Part I: Modeling of Powder Bed Fusion.” Computational Materials Science 150 (July): 304–313. https://doi.org/https://doi.org/10.1016/j.commatsci.2018.04.022.
- Nandy, Jyotirmoy, Seshadev Sahoo, Natraj Yedla, and Hrushikesh Sarangi. 2020. “Molecular Dynamics Simulation of Coalescence Kinetics and Neck Growth in Laser Additive Manufacturing of Aluminum Alloy Nanoparticles.” Journal of Molecular Modeling 26 (6): 125. https://doi.org/https://doi.org/10.1007/s00894-020-04395-4.
- Olleak, Alaa, and Zhimin Xi. 2020. “Calibration and Validation Framework for Selective Laser Melting Process Based on Multi-Fidelity Models and Limited Experiment Data.” Journal of Mechanical Design 142: 8. https://doi.org/https://doi.org/10.1115/1.4045744.
- Panwisawas, C., Mark Hardy, Eric Huron, Uwe Glatzel, Brian Griffin, Beth Lewis, Cathie Rae, et al. 2016. “A Multi-Scale Multi-Physics Approach to Modelling of Additive Manufacturing in Nickel-Based Superalloys.” Proceedings of the 13th International Symposium on Superalloys, 1021–1030. https://doi.org/https://doi.org/10.1002/9781119075646.ch108.
- Panwisawas, C., Chunlei Qiu, Magnus J. Anderson, Yogesh Sovani, Richard P. Turner, Moataz M. Attallah, Jeffery W. Brooks, and Hector C. Basoalto. 2017. “Mesoscale Modelling of Selective Laser Melting: Thermal Fluid Dynamics and Microstructural Evolution.” Computational Materials Science 126 (January): 479–490. https://doi.org/https://doi.org/10.1016/j.commatsci.2016.10.011.
- Park, Hong-Seok, and Dinh-Son Nguyen. 2017. “Study on Flaking Behavior in Selective Laser Melting Process.” Procedia CIRP, Manufacturing Systems 4.0 – Proceedings of the 50th CIRP Conference on Manufacturing Systems, 63 (January): 569–572. https://doi.org/https://doi.org/10.1016/j.procir.2017.03.146.
- Parteli, Eric J.R., and Thorsten Pöschel. 2016. “Particle-Based Simulation of Powder Application in Additive Manufacturing.” Powder Technology 288 (January): 96–102. https://doi.org/https://doi.org/10.1016/j.powtec.2015.10.035.
- Pereira, Juan Carlos, Jon Aranzabe, Mari Carmen Taboada, Noelia Ruiz, and Pedro Pablo Rodriguez. 2021. “Analysis of Microstructure and Mechanical Properties in As-Built/As-Cast and Heat-Treated Conditions for IN718 Alloy Obtained by Selective Laser Melting and Investment Casting Processes.” Crystals 11 (10): 1196. https://doi.org/https://doi.org/10.3390/cryst11101196.
- Pleass, Christopher, and Sathiskumar Jothi. 2018. “Influence of Powder Characteristics and Additive Manufacturing Process Parameters on the Microstructure and Mechanical Behaviour of Inconel 625 Fabricated by Selective Laser Melting.” Additive Manufacturing 24 (December): 419–431. https://doi.org/https://doi.org/10.1016/j.addma.2018.09.023.
- Pratheesh Kumar, S., S. Elangovan, R. Mohanraj, and J. R. Ramakrishna. 2021. “Review on the Evolution and Technology of State-of-the-Art Metal Additive Manufacturing Processes.” Materials Today: Proceedings 46: 7907–7920. https://doi.org/https://doi.org/10.1016/j.matpr.2021.02.567.
- Ran, Jiangtao, Xiaojing Sun, Shiliang Wei, Zhuo Chen, and Hong Zhao. 2021. “Spatial and Direction-Based Characterization of Microstructures and Microhardness of TA15 Titanium Alloy Produced by Electron Beam Melting.” Crystals 11 (5): 495. https://doi.org/https://doi.org/10.3390/cryst11050495.
- Rankouhi, Behzad, Salman Jahani, Frank E. Pfefferkorn, and Dan J. Thoma. 2021. “Compositional Grading of a 316L-Cu Multi-Material Part Using Machine Learning for the Determination of Selective Laser Melting Process Parameters.” Additive Manufacturing 38 (February): 101836. https://doi.org/https://doi.org/10.1016/j.addma.2021.101836.
- Razavykia, Abbas, Eugenio Brusa, Cristiana Delprete, and Reza Yavari. 2020. “An Overview of Additive Manufacturing Technologies—A Review to Technical Synthesis in Numerical Study of Selective Laser Melting.” Materials 13 (17): 3895. https://doi.org/https://doi.org/10.3390/ma13173895.
- Riener, Kirstin, Nikolaj Albrecht, Stefan Ziegelmeier, Robert Ramakrishnan, Lukas Haferkamp, Adriaan B. Spierings, and Gerhard J. Leichtfried. 2020. “Influence of Particle Size Distribution and Morphology on the Properties of the Powder Feedstock as Well as of AlSi10Mg Parts Produced by Laser Powder Bed Fusion (LPBF).” Additive Manufacturing 34 (August): 101286. https://doi.org/https://doi.org/10.1016/j.addma.2020.101286.
- Roehling, Tien T., Sheldon S. Q. Wu, Saad A. Khairallah, John D. Roehling, S. Stefan Soezeri, Michael F. Crumb, and Manyalibo J. Matthews. 2017. “Modulating Laser Intensity Profile Ellipticity for Microstructural Control during Metal Additive Manufacturing.” Acta Materialia 128 (April): 197–206. https://doi.org/https://doi.org/10.1016/j.actamat.2017.02.025.
- Röttger, Arne, Karina Geenen, Matthias Windmann, Florian Binner, and Werner Theisen. 2016. “Comparison of Microstructure and Mechanical Properties of 316L Austenitic Steel Processed by Selective Laser Melting with Hot-Isostatic Pressed and Cast Material.” Materials Science and Engineering: A 678 (December): 365–376. https://doi.org/https://doi.org/10.1016/j.msea.2016.10.012.
- Russell, M. A., A. Souto-Iglesias, and T. I. Zohdi. 2018. “Numerical Simulation of Laser Fusion Additive Manufacturing Processes Using the SPH Method.” Computer Methods in Applied Mechanics and Engineering 341 (November): 163–187. https://doi.org/https://doi.org/10.1016/j.cma.2018.06.033.
- Scime, Luke, and Jack Beuth. 2018. “A Multi-Scale Convolutional Neural Network for Autonomous Anomaly Detection and Classification in a Laser Powder Bed Fusion Additive Manufacturing Process.” Additive Manufacturing 24 (December): 273–286. https://doi.org/https://doi.org/10.1016/j.addma.2018.09.034.
- Shevchik, S. A., C. Kenel, C. Leinenbach, and K. Wasmer. 2018. “Acoustic Emission for in Situ Quality Monitoring in Additive Manufacturing Using Spectral Convolutional Neural Networks.” Additive Manufacturing 21 (May): 598–604. https://doi.org/https://doi.org/10.1016/j.addma.2017.11.012.
- Shi, Rongpei, Saad Khairallah, Tae Wook Heo, Matthew Rolchigo, Joseph T. McKeown, and Manyalibo J. Matthews. 2019. “Integrated Simulation Framework for Additively Manufactured Ti-6Al-4V: Melt Pool Dynamics, Microstructure, Solid-State Phase Transformation, and Microelastic Response.” JOM Journal of the Minerals Metals and Materials Society 71 (10): 3640–3655. https://doi.org/https://doi.org/10.1007/s11837-019-03618-1.
- Skalon, Mateusz, Benjamin Meier, Thomas Leitner, Siegfried Arneitz, Sergio T. Amancio-Filho, and Christof Sommitsch. 2021. “Reuse of Ti6Al4 V Powder and Its Impact on Surface Tension, Melt Pool Behavior and Mechanical Properties of Additively Manufactured Components.” Materials 14 (5): 1251. https://doi.org/https://doi.org/10.3390/ma14051251.
- Sun, Zhe, Yuan-Hui Chueh, and Lin Li. 2020. “Multiphase Mesoscopic Simulation of Multiple and Functionally Gradient Materials Laser Powder Bed Fusion Additive Manufacturing Processes.” Additive Manufacturing 35 (October): 101448. https://doi.org/https://doi.org/10.1016/j.addma.2020.101448.
- Sutton, Austin T., Caitlin S. Kriewall, Sreekar Karnati, Ming C. Leu, Joseph W. Newkirk, Wes Everhart, and Ben Brown. 2020. “Evolution of AISI 304L Stainless Steel Part Properties Due to Powder Recycling in Laser Powder-Bed Fusion.” Additive Manufacturing 36 (December): 101439. https://doi.org/https://doi.org/10.1016/j.addma.2020.101439.
- Tan, Pengfei, Raj Kiran, and Kun Zhou. 2021. “Effects of Sub-Atmospheric Pressure on Keyhole Dynamics and Porosity in Products Fabricated by Selective Laser Melting.” Journal of Manufacturing Processes 64 (April): 816–827. https://doi.org/https://doi.org/10.1016/j.jmapro.2021.01.058.
- Tan, Jun Hao, Wai Leong Eugene Wong, and Kenneth William Dalgarno. 2017. “An Overview of Powder Granulometry on Feedstock and Part Performance in the Selective Laser Melting Process.” Additive Manufacturing 18 (December): 228–255. https://doi.org/https://doi.org/10.1016/j.addma.2017.10.011.
- Tonelli, Lavinia, Erica Liverani, Giuseppe Valli, Alessandro Fortunato, and Lorella Ceschini. 2020. “Effects of Powders and Process Parameters on Density and Hardness of A357 Aluminum Alloy Fabricated by Selective Laser Melting.” The International Journal of Advanced Manufacturing Technology 106 (1–2): 371–383. https://doi.org/https://doi.org/10.1007/s00170-019-04641-x.
- Wang, Xiaoqing, and Kevin Chou. 2019. “Microstructure Simulations of Inconel 718 During Selective Laser Melting Using a Phase Field Model.” The International Journal of Advanced Manufacturing Technology 100 (9–12): 2147–2162. https://doi.org/https://doi.org/10.1007/s00170-018-2814-z.
- Wang, Zhen, Zhiyu Xiao, Ying Tse, Chuanshou Huang, and Weiwen Zhang. 2019. “Optimization of Processing Parameters and Establishment of a Relationship between Microstructure and Mechanical Properties of SLM Titanium Alloy.” Optics & Laser Technology 112 (April): 159–167. https://doi.org/https://doi.org/10.1016/j.optlastec.2018.11.014.
- Wang, Zekun, Wentao Yan, Wing Kam Liu, and Moubin Liu. 2019. “Powder-Scale Multi-Physics Modeling of Multi-Layer Multi-Track Selective Laser Melting with Sharp Interface Capturing Method.” Computational Mechanics 63 (4): 649–661. https://doi.org/https://doi.org/10.1007/s00466-018-1614-5.
- Waqar, Saad, Kai Guo, and Jie Sun. 2022. “Evolution of Residual Stress Behavior in Selective Laser Melting (SLM) of 316L Stainless Steel through Preheating and in-Situ Re-Scanning Techniques.” Optics & Laser Technology 149 (May): 107806. https://doi.org/https://doi.org/10.1016/j.optlastec.2021.107806.
- Wei, Lien Chin, Lili E. Ehrlich, Matthew J. Powell-Palm, Colt Montgomery, Jack Beuth, and Jonathan A. Malen. 2018. “Thermal Conductivity of Metal Powders for Powder Bed Additive Manufacturing.” Additive Manufacturing 21 (May): 201–208. https://doi.org/https://doi.org/10.1016/j.addma.2018.02.002.
- Xia, Mujian, Dongdong Gu, Guanqun Yu, Donghua Dai, Hongyu Chen, and Qimin Shi. 2017. “Porosity Evolution and Its Thermodynamic Mechanism of Randomly Packed Powder-Bed during Selective Laser Melting of Inconel 718 Alloy.” International Journal of Machine Tools and Manufacture 116 (May): 96–106. https://doi.org/https://doi.org/10.1016/j.ijmachtools.2017.01.005.
- Xing, Wei, Tianyi Lyu, Xin Chu, Yiming Rong, Chi-Guhn Lee, Qiang Sun, and Yu Zou. 2021. “Recognition and Classification of Single Melt Tracks Using Deep Neural Network: A Fast and Effective Method to Determine Process Windows in Selective Laser Melting.” Journal of Manufacturing Processes 68 (August): 1746–1757. https://doi.org/https://doi.org/10.1016/j.jmapro.2021.06.076.
- Yadav, Pinku, Olivier Rigo, Corinne Arvieu, Emilie Le Guen, and Eric Lacoste. 2021. “Data Treatment of In Situ Monitoring Systems in Selective Laser Melting Machines.” Advanced Engineering Materials 23 (5): 2001327. https://doi.org/https://doi.org/10.1002/adem.202001327.
- Yadroitsev, I., A. Gusarov, I. Yadroitsava, and I. Smurov. 2010. “Single Track Formation in Selective Laser Melting of Metal Powders.” Journal of Materials Processing Technology 210 (12): 1624–1631. https://doi.org/https://doi.org/10.1016/j.jmatprotec.2010.05.010.
- Yakout, Mostafa, M. A. Elbestawi, and Stephen C. Veldhuis. 2019. “Density and Mechanical Properties in Selective Laser Melting of Invar 36 and Stainless Steel 316L.” Journal of Materials Processing Technology 266 (April): 397–420. https://doi.org/https://doi.org/10.1016/j.jmatprotec.2018.11.006.
- Yakout, Mostafa, M. A. Elbestawi, S. C. Veldhuis, and S. Nangle-Smith. 2020. “Influence of Thermal Properties on Residual Stresses in SLM of Aerospace Alloys.” Rapid Prototyping Journal 26 (1): 213–222. https://doi.org/https://doi.org/10.1108/RPJ-03-2019-0065.
- Yang, Min, Lu Wang, and Wentao Yan. 2021. “Phase-Field Modeling of Grain Evolutions in Additive Manufacturing from Nucleation, Growth, to Coarsening.” Npj Computational Materials 7 (1): 56. https://doi.org/https://doi.org/10.1038/s41524-021-00524-6.
- Yi, Feng, Qingjun Zhou, Chen Wang, Zhenyu Yan, and Binbin Liu. 2021. “Effect of Powder Reuse on Powder Characteristics and Properties of Inconel 718 Parts Produced by Selective Laser Melting.” Journal of Materials Research and Technology 13 (July): 524–533. https://doi.org/https://doi.org/10.1016/j.jmrt.2021.04.091.
- Yin, Jie, Gangyong Peng, Changpeng Chen, Jingjing Yang, Haihong Zhu, Linda Ke, Zemin Wang, et al. 2018. “Thermal Behavior and Grain Growth Orientation During Selective Laser Melting of Ti-6Al-4V Alloy.” Journal of Materials Processing Technology 260 (October): 57–65. https://doi.org/https://doi.org/10.1016/j.jmatprotec.2018.04.035.
- Yu, Tao, and Jidong Zhao. 2021. “Semi-Coupled Resolved CFD–DEM Simulation of Powder-Based Selective Laser Melting for Additive Manufacturing.” Computer Methods in Applied Mechanics and Engineering 377 (April): 113707. https://doi.org/https://doi.org/10.1016/j.cma.2021.113707.
- Yuan, Pengpeng, and Dongdong Gu. 2015. “Molten Pool Behaviour and Its Physical Mechanism During Selective Laser Melting of TiC/AlSi10Mg Nanocomposites: Simulation and Experiments.” Journal of Physics D: Applied Physics 48 (3): 035303. https://doi.org/https://doi.org/10.1088/0022-3727/48/3/035303.
- Zapico, Pablo, Sara Giganto, Joaquín Barreiro, and Susana Martínez-Pellitero. 2020. “Characterisation of 17-4PH Metallic Powder Recycling to Optimise the Performance of the Selective Laser Melting Process.” Journal of Materials Research and Technology 9 (2): 1273–1285. https://doi.org/https://doi.org/10.1016/j.jmrt.2019.11.054.
- Zhan, Zhixin. 2019. “Experiments and Numerical Simulations for the Fatigue Behavior of a Novel TA2-TA15 Titanium Alloy Fabricated by Laser Melting Deposition.” International Journal of Fatigue 121 (April): 20–29. https://doi.org/https://doi.org/10.1016/j.ijfatigue.2018.12.001.
- Zhang, Zhidong, Usman Ali, Yahya Mahmoodkhani, Yuze Huang, Shahriar Imani Shahabad, Adhitan Rani Kasinathan, and Ehsan Toyserkani. 2020. “Experimental and Numerical Investigation on the Effect of Layer Thickness during Laser Powder-Bed Fusion of Stainless Steel 17-4PH.” International Journal of Rapid Manufacturing 9 (2/3): 212. https://doi.org/https://doi.org/10.1504/IJRAPIDM.2020.107735.
- Zhang, Yancheng, Gildas Guillemot, Marc Bernacki, and Michel Bellet. 2018. “Macroscopic Thermal Finite Element Modeling of Additive Metal Manufacturing by Selective Laser Melting Process.” Computer Methods in Applied Mechanics and Engineering 331 (April): 514–535. https://doi.org/https://doi.org/10.1016/j.cma.2017.12.003.
- Zhang, Zhidong, Yuze Huang, Adhitan Rani Kasinathan, Shahriar Imani Shahabad, Usman Ali, and Yahya Mahmoodkhani. 2019. “3-Dimensional Heat Transfer Modeling for Laser Powder-Bed Fusion Additive Manufacturing with Volumetric Heat Sources Based on Varied Thermal Conductivity and Absorptivity.” Optics & Laser Technology 109 (January): 297–312. https://doi.org/https://doi.org/10.1016/j.optlastec.2018.08.012.
- Zhang, Shanshan, Brandon Lane, Justin Whiting, and Kevin Chou. 2019. “On Thermal Properties of Metallic Powder in Laser Powder Bed Fusion Additive Manufacturing.” Journal of Manufacturing Processes 47 (November): 382–392. https://doi.org/https://doi.org/10.1016/j.jmapro.2019.09.012.
- Zhang, Wentai, Akash Mehta, Prathamesh S. Desai, and C. Fred Higgs III. 2017. “Machine Learning Enabled Powder Spreading Process Map for Metal Additive Manufacturing (AM).” In 2017 International Solid Freeform Fabrication Symposium. University of Texas at Austin, 2017. Solid Freeform Fabrication Proceedings. pans.
- Zhang, Xing, Christopher J. Yocom, Bo Mao, and Yiliang Liao. 2019. “Microstructure Evolution during Selective Laser Melting of Metallic Materials: A Review.” Journal of Laser Applications 31 (3): 031201. https://doi.org/https://doi.org/10.2351/1.5085206.
- Zohdi, T. I. 2014. “Additive Particle Deposition and Selective Laser Processing-a Computational Manufacturing Framework.” Computational Mechanics 54 (1): 171–191. https://doi.org/https://doi.org/10.1007/s00466-014-1012-6.