Distortion analysis of generatively designed hinge bracket using meso-scaled thermomechanical simulation with experimental validation

References

• Ansari, Md Jonaet, Dinh Son Nguyen, and Hong Seok Park. 2019. “Investigation of SLM Process in Terms of Temperature Distribution and Melting Pool Size: Modeling and Experimental Approaches.” Materials 12 (8), https://doi.org/10.3390/ma12081272.
   Google Scholar
• Buonamici, Francesco, Monica Carfagni, Rocco Furferi, Yary Volpe, and Lapo Governi. 2020. “Generative Design: An Explorative Study.” Computer-Aided Design and Applications 18 (1): 144–155. https://doi.org/10.14733/cadaps.2021.144-155.
   Google Scholar
• Chen, Yisheng, Qianglong Wang, Chong Wang, Peng Gong, Yincheng Shi, Yi Yu, and Zhenyu Liu. 2021. “Topology Optimization Design and Experimental Research of a 3d-Printed Metal Aerospace Bracket Considering Fatigue Performance.” Applied Sciences (Switzerland) 11 (15), https://doi.org/10.3390/app11156671.
   Google Scholar
• Chiumenti, Michele, Eric Neiva, Emilio Salsi, Miguel Cervera, Santiago Badia, Joan Moya, Zhuoer Chen, Caroline Lee, and Christopher Davies. 2017. “Numerical Modelling and Experimental Validation in Selective Laser Melting.” Additive Manufacturing 18 (October): 171–185. https://doi.org/10.1016/j.addma.2017.09.002.
   Google Scholar
• Davies, Catrin M., Olivia Withnell, Tobias Ronnerberg, Richard Williams, and Paul A. Hooper. 2018. “Fracture Analysis of 316L Steel Samples Manufactured by Selective Laser Melting.” Procedia Structural Integrity 13: 1384–1389. https://doi.org/10.1016/j.prostr.2018.12.289.
   Google Scholar
• Dubrovskaya, Aleksandra, Konstantin Dongauzer, and Rustam Faskhutdinov. 2017. “The Design of Lightweight Gas Turbine Engine Parts Using Topology Optimization.” 01067. https://doi.org/10.1051/matecconf/201712901067.
   Google Scholar
• Foroozmehr, Ali, Mohsen Badrossamay, Ehsan Foroozmehr, and Sa’id Golabi. 2016. “Finite Element Simulation of Selective Laser Melting Process Considering Optical Penetration Depth of Laser in Powder Bed.” Materials and Design 89: 255–263. https://doi.org/10.1016/j.matdes.2015.10.002.
   Web of Science ®Google Scholar
• Hodge, N. E., R. M. Ferencz, and J. M. Solberg. 2014. “Implementation of a Thermomechanical Model for the Simulation of Selective Laser Melting.” Computational Mechanics 54 (1): 33–51. https://doi.org/10.1007/s00466-014-1024-2.
   Web of Science ®Google Scholar
• Kallioras, Nikos Ath, and Nikos D. Lagaros. 2020. “DzAIℕ: Deep Learning Based Generative Design.” Procedia Manufacturing 44: 591–598. https://doi.org/10.1016/j.promfg.2020.02.251.
   Google Scholar
• Khosravani, Mohammad Reza, and Tamara Reinicke. 2020. “On the Use of X-Ray Computed Tomography in Assessment of 3D-Printed Components.” Journal of Nondestructive Evaluation 39 (4), https://doi.org/10.1007/s10921-020-00721-1.
   Google Scholar
• Klippstein, Helge, Anne Duchting, Thomas Reiher, Florian Hengsbach, Dennis Menge, and Hans-joachim Schmid. 2019. “Development, Production and Post-processing of a Topology.” no. December.
   Google Scholar
• Li, C., C. H. Fu, Y. B. Guo, and F. Z. Fang. 2016. “A Multiscale Modeling Approach for Fast Prediction of Part Distortion in Selective Laser Melting.” Journal of Materials Processing Technology 229: 703–712. https://doi.org/10.1016/j.jmatprotec.2015.10.022.
   Web of Science ®Google Scholar
• Li, Yali, and Dongdong Gu. 2014. “Thermal Behavior during Selective Laser Melting of Commercially Pure Titanium Powder: Numerical Simulation and Experimental Study.” Additive Manufacturing 1-4: 99–109. https://doi.org/10.1016/j.addma.2014.09.001.
   Google Scholar
• Li, C., J. F. Liu, X. Y. Fang, and Y. B. Guo. 2017. “Efficient Predictive Model of Part Distortion and Residual Stress in Selective Laser Melting.” Additive Manufacturing 17: 157–168. https://doi.org/10.1016/j.addma.2017.08.014.
   Web of Science ®Google Scholar
• Li, C., J. F. Liu, and Y. B. Guo. 2016a. “Efficient Multiscale Prediction of Cantilever Distortion by Selective Laser Melting.” Solid Freeform Fabrication 2016: Proceedings of the 27th Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference, SFF 2016, November, 236–246.
   Google Scholar
• Li, C., J. F. Liu, and Y. B. Guo. 2016b. “Prediction of Residual Stress and Part Distortion in Selective Laser Melting.” Procedia CIRP 45: 171–174. https://doi.org/10.1016/j.procir.2016.02.058.
   Google Scholar
• Lindgren, Lars-erik, Andreas Malmelöv, and Andreas Lundbäck. 2020. “History Reduction by Lumping for Time-E Ffi Cient.” Metals 10 (58): 1–17.
   Google Scholar
• Liu, Jikai, Andrew T. Gaynor, Shikui Chen, Zhan Kang, Krishnan Suresh, Akihiro Takezawa, Lei Li, et al. 2018. “Current and Future Trends in Topology Optimization for Additive Manufacturing”.
   Google Scholar
• Masoomi, M., S. M. Thompson, N. Shamsaei, A. Elwany, and L. Bian. 2020. “An Experimental-Numerical Investigation of Heat Transfer during Selective Laser Melting.” Proceedings – 26th Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference, SFF 2015, October, 229–242. https://doi.org/10.13140/RG.2.1.2325.0645.
   Google Scholar
• Mishnaevsky, Leon L. 2005. “Automatic Voxel-Based Generation of 3D Microstructural FE Models and Its Application to the Damage Analysis of Composites.” Materials Science and Engineering: A 407 (1–2): 11–23. https://doi.org/10.1016/j.msea.2005.06.047.
   Web of Science ®Google Scholar
• Mugwagwa, L., D. Dimitrov, S. Matope, and R. Muvunzi. 2016. “Residual Stresses and Distortions in Selective Laser Melting – a Review.” International Conference of the Rapid Product Development Association of South Africa, June.
   Google Scholar
• Neofytou, Andreas, and H. Alicia Kim. 2020. “Level Set Topology Optimization for Design-Dependent Pressure Loads Using the Reproducing Kernel Particle Method.” 2012.
   Google Scholar
• Ntintakis, Ioannis, and George E. Stavroulakis. 2020. “Progress and Recent Trends in Generative Design.” MATEC Web of Conferences 318: 01006. https://doi.org/10.1051/matecconf/202031801006.
   Google Scholar
• Pagac, Marek, Jiri Hajnys, Radim Halama, Tariq Aldabash, Jakub Mesicek, Lukas Jancar, and Jan Jansa. 2021. “Prediction of Model Distortion by Fem in 3d Printing via the Selective Laser Melting of Stainless Steel Aisi 316l.” Applied Sciences (Switzerland) 11 (4): 1–16. https://doi.org/10.3390/app11041656.
   Web of Science ®Google Scholar
• Reshid, Meseret, Khairul Wahid, Muhammad Nur, Farhan Saniman, W. M. Wan Muhamad, K. A. Abdul Wahid, and M. N. Reshid. 2020. “Mass Reduction of a Jet Engine Bracket Using Topology Optimisation for Additive Manufacturing Application.” International Journal of Advanced Science and Technology 29 (8s): 4438–4444. https://www.researchgate.net/publication/342378368.
   Google Scholar
• Setien, Iñaki, Michele Chiumenti, Sjoerd van der Veen, Maria San Sebastian, Fermín Garciandía, and Alberto Echeverría. 2019. “Empirical Methodology to Determine Inherent Strains in Additive Manufacturing.” Computers and Mathematics with Applications 78: 2282–2295. https://doi.org/10.1016/j.camwa.2018.05.015.
   Web of Science ®Google Scholar
• Sochalski-Kolbus, L. M., E. A. Payzant, P. A. Cornwell, T. R. Watkins, S. S. Babu, R. R. Dehoff, M. Lorenz, O. Ovchinnikova, and C. Duty. 2015. “Comparison of Residual Stresses in Inconel 718 Simple Parts Made by Electron Beam Melting and Direct Laser Metal Sintering.” Metallurgical and Materials Transactions A 46 (3): 1419–1432. https://doi.org/10.1007/s11661-014-2722-2.
   Web of Science ®Google Scholar
• Taylor, Publisher, Loucas Papadakis, Andreas Loizou, Jeroen Risse, Sebastian Bremen, and Johannes Schrage. 2013. “Virtual and Physical Prototyping A Computational Reduction Model for Appraising Structural Effects in Selective Laser Melting Manufacturing A Computational Reduction Model for Appraising Structural Effects in Selective Laser Melting Manufacturing A Method,” January 2015: 37–41. https://doi.org/10.1080/17452759.2013.868005.
   Google Scholar
• Tran, Hong-chuong, and Yu-lung Lo. 2018. “Heat Transfer Simulations of Selective Laser Melting Process Based on Volumetric Heat Source with Powder Size Consideration.” Journal of Materials Processing Technology 255 (December 2017): 411–425. https://doi.org/10.1016/j.jmatprotec.2017.12.024.
   Google Scholar
• Wu, Amanda S., Donald W. Brown, Mukul Kumar, Gilbert F. Gallegos, and Wayne E. King. 2014. “An Experimental Investigation into Additive Manufacturing-Induced Residual Stresses in 316L Stainless Steel.” Metallurgical and Materials Transactions A 45 (13): 6260–6270. https://doi.org/10.1007/s11661-014-2549-x.
   Web of Science ®Google Scholar
• Xu, Jie, Richard A. Buswell, Peter Kinnell, Istvan Biro, John Hodgson, Nikolaos Konstantinidis, and Lieyun Ding. 2020. “Inspecting Manufacturing Precision of 3D Printed Concrete Parts Based on Geometric Dimensioning and Tolerancing.” Automation in Construction 117 (September 2019): 103233. https://doi.org/10.1016/j.autcon.2020.103233.
   Google Scholar
• Xu, Yangli, Tingting Li, Xuanyang Cao, Yuanqiang Tan, and Peihui Luo. 2021. “Compressive Properties of 316L Stainless Steel Topology-Optimized Lattice Structures Fabricated by Selective Laser Melting.” Advanced Engineering Materials 23 (3), https://doi.org/10.1002/adem.202000957.
   Google Scholar
• Yang, X. Y., Y. M. Xie, and G. P. Steven. 2005. “Evolutionary Methods for Topology Optimisation of Continuous Structures with Design Dependent Loads.” 83: 956–963. https://doi.org/10.1016/j.compstruc.2004.10.011.
   Google Scholar
• Zhan, Junjie, Jing Li, Pai Liu, and Yangjun Luo. 2021. “SS Symmetry A Gradient-Free Topology Optimization Strategy for Continuum Structures with Design-Dependent Boundary Loads”.
   Google Scholar
• Zhang, Yancheng, Gildas Guillemot, Marc Bernacki, and Michel Bellet. 2018. “Macroscopic Thermal Finite Element Modeling of Additive Metal Manufacturing by Selective Laser Melting Process.” Computer Methods in Applied Mechanics and Engineering 331: 514–535. https://doi.org/10.1016/j.cma.2017.12.003.
   Web of Science ®Google Scholar
• Zhao, Qinghai, Xiaokai Chen, Zheng Dong Ma, and Yi Lin. 2015. “Robust Topology Optimization Based on Stochastic Collocation Methods Under Loading Uncertainties.” Mathematical Problems in Engineering 2015, https://doi.org/10.1155/2015/580980.
   Google Scholar
• Zhu, J., M. Khurshid, and Z. Barsoum. 2019. “Accuracy of Computational Welding Mechanics Methods for Estimation of Angular Distortion and Residual Stresses.” Welding in the World 63 (5): 1391–1405. https://doi.org/10.1007/s40194-019-00746-9.
   Web of Science ®Google Scholar