References
- Athanasopoulos, N., and N. Siakavellas. 2017. “Smart Patterned Surfaces with Programmable Thermal Emissivity and Their Design Through Combinatorial Strategies.” Scientific Reports, doi:10.1038/s41598-017-13132-6.
- Barthlott, W., et al. 2010. “The Salvinia Paradox: Superhydrophobic Surfaces with Hydrophilic Pins for Air Retention Under Water.” Advanced Materials 22: 2325–2328.
- Barthlott, W., and C. Neinhuis. 1997. “Purity of the Sacred Lotus, or Escape from Contamination in Biological Surfaces.” Planta 202: 1–8.
- Boardman, A. Pioneers in Metamaterials: John Pendry and Victor Veselago. Journal of Optices 13, 020401 (2010).
- Bückmann, T., et al. 2012. “Tailored 3D Mechanical Metamaterials Made by Dip-in Direct-Laser-Writing Optical Lithography.” Advanced Materials 24: 2710–2714.
- Carstensen, M. S., et al. 2018. “Holographic Resonant Laser Printing of Metasurfaces Using Plasmonic Template.” ACS Photonics 5: 1665–1670.
- Chen, H.-T., A. J. Taylor, and N. Yu. 2016. “A Review of Metasurfaces: Physics and Applications.” Reports on Progress in Physics 79: 076401.
- de Blas Romero, A. 2018. Design Strategies for Additive Manufacturing Using vat Photopolymerization Systems. Madrid, Spain: E.T.S.I. Industriales (UPM).
- De Blas Romero, A. 2018. “Design Strategies for Additive Manufacturing Using Vat Photopolymerization Systems.” PhD Thesis, Universidad Politécnica de Madrid.
- Dirdal, C. A., et al. 2020. “Towards High-Throughput Large-Area Metalens Fabrication Using UV-Nanoimprint Lithography and Bosch Deep Reactive ion Etching.” Optics Express 28: 15542–15561.
- Díaz Lantada, A., et al. 2020. “Synergies Between Surface Microstructuring and Molecular Nanopatterning for Controlling Cell Populations on Polymeric Biointerfaces.” Polymers (Basel) 12: E655.
- Díaz Lantada A., F. Franco-Martínez, S. Hengsbach, F. Rupp, R. Thelen, and K. Bade. 2020. “Artificial Intelligence Aided Design of Microtextured Surfaces: Application to Controlling Wettability.” Nanomaterials (Basel) 10 (11): 2287. doi:10.3390/nano10112287.
- Faraji Rad, Z., P. D. Prewett, and G. J. & Davies. 2021. “High-resolution Two-photon Polymerization: The Most Versatile Technique for the Fabrication of Microneedle Arrays.” Microsystems & Nanoengineering 7 (1): 71. doi:10.1038/s41378-021-00298-3.
- Gad-el-Hak, M. 2001. The MEMS Handbook. Notre Dame, Indiana, USA: CRC Press.
- Gaymann, A., F. Montomoli, and M. Pietropaoli. 2017. “Design for Additive Manufacturing: Valves Without Moving Parts.” In: American Society of Mechanical Engineers Digital Collection, 8, Charlotte, North Carolina, USA. doi:10.1115/GT2017-64872.
- Göppert-Mayer, M. 1931. “Über Elementarakte mit Zwei Quantensprüngen.” Annalen der Physik 401 (3): 273–294.
- Hasanov, S., S. Alkunte, M. Rajeshirke, A. Gupta, O. Huseynov, I. Fidan, F. Alifui-Segbaya, and A. Rennie. 2022. “Review on Additive Manufacturing of Multi-Material Parts: Progress and Challenges.” J. Manuf. Mater. Process 6 (4), 1–32.
- Hengsbach, S., and A. D. Lantada. 2014. “Rapid Prototyping of Multi-Scale Biomedical Microdevices by Combining Additive Manufacturing Technologies.” Biomedical microdevices 16: 617–627.
- Hengsbach, S., and A. Lantada. 2015. “Direct Laser Writing of Fractal Surfaces: Strategy to Design and Manufacture Textured Materials†.” Advanced Engineering Materials, 12(2), 172–180. doi:10.1002/ADEM.201400082.
- Holloway, C. L., et al. 2012. “An Overview of the Theory and Applications of Metasurfaces: The Two-Dimensional Equivalents of Metamaterials.” IEEE Antennas and Propagation Magazine 54: 10–35.
- Huang, Z., G. C.-P. Tsui, Y. Deng, and C.-Y. Tang. 2020. “Two-photon Polymerization Nanolithography Technology for Fabrication of Stimulus-Responsive Micro/Nano-Structures for Biomedical Applications.” Nanotechnology Reviews 9 (1): 1118–1136. doi:10.1515/ntrev-2020-0073.
- Jiang, T., C. Li, Q. He, and Z.-K. Peng. 2020. “Randomized Resonant Metamaterials for Single-Sensor Identification of Elastic Vibrations.” Nature Communications 11: 2353.
- Kadic, M., T. Buckmann, N. Stenger, M. Thiel, and M. Wegener. 2012. “On the Feasibility of Pentamode Mechanical Metamaterials.” Appl. Phys. Lett. 100, 191901. doi:10.1063/1.4709436.
- Kadic, M., T. Bückmann, R. Schittny, P. Gumbsch, and M. Wegener. 2014. “Pentamode Metamaterials with Independently Tailored Bulk Modulus and Mass Density.” Phys. Rev. Applied 2: 054007.
- Kadic, M., G. W. Milton, M. van Hecke, and M. Wegener. 2019. “3D Metamaterials.” Nat Rev Phys 1: 198–210.
- Kaiser, W., and C. Garrett. 1961. “Two-photon Excitation in Ca F 2: Eu 2+.” Physical Review Letters 7 (6): 229.
- Kessel, A., et al. 2020. “Soft Lithography for Manufacturing Scalable Perovskite Metasurfaces with Enhanced Emission and Absorption.” Advanced Optical Materials 8: 2001627.
- Kollmer, J., P. Dorfinger, J. Stampfl, and G. Mitteramskogler. 2017. “Non-metallic High Performance Materials for Lithography-Based Additive Manufacturing.” In Rapid.Tech ? International Trade Show & Conference for Additive Manufacturing, edited by M. Kynast, M. Eichmann, G. Witt, 244–254. Erfurt, Germany: Carl Hanser Verlag GmbH & Co. KG. doi:10.3139/9783446454606.018.
- Kornyshev, A. A. 2020. “Electrochemical Metamaterials.” Journal of Solid State Electrochemistry 24: 2101–2111.
- Laguna, O. H., P. F. Lietor, F. J. I. Godino, and F. A. Corpas-Iglesias. 2021. “A Review on Additive Manufacturing and Materials for Catalytic Applications: Milestones, key Concepts, Advances and Perspectives.” Materials & Design 208: 109927.
- Lantada, A. D., S. Hengsbach, and K. Bade. 2017. “Lotus-on-chip: Computer-Aided Design and 3D Direct Laser Writing of Bioinspired Surfaces for Controlling the Wettability of Materials and Devices.” Bioinspiration & Biomimetics 12: 066004.
- Lee, K.-S., R. H. Kim, D.-Y. Yang, and S. H. Park. 2008. “Advances in 3D Nano/Microfabrication Using two-Photon Initiated Polymerization.” Progress in Polymer Science 33 (6): 631–681.
- Li, L., et al. 2014. “Fabrication of Microinjection-Molded Miniature Freeform Alvarez Lenses.” Applied Optics, doi:10.1364/AO.53.004248.
- Liu, F., et al. 2019. “Intelligent Metasurfaces with Continuously Tunable Local Surface Impedance for Multiple Reconfigurable Functions.” Physical Review Applied 11, 044024-1-044024-10.
- Metamaterials: Physics and Engineering Explorations. 2006. edited by N. Engheta, R.W. Ziolkowski, 1–440 Wiley: IEEE Press. https://www.wiley.com/en-ie/Metamaterials%3A+Physics+and+Engineering+Explorations+-p-9780471761020.
- Mitteramskogler, G., M. Schwentenwein, and C. Burkhardt. 2018. “Lithography-based Metal Manufacturing of 316L Powder.” EPMA.
- Ou, H., F. Lu, Z. Xu, and Y.-S. Lin. 2020. “Terahertz Metamaterial with Multiple Resonances for Biosensing Application.” Nanomaterials (Basel) 10: 1038.
- Pawlicki, M., H. A. Collins, R. G. Denning, and H. L. Anderson. 2009. “Two-photon Absorption and the Design of two-Photon Dyes.” Angewandte Chemie International Edition 48 (18): 3244–3266. doi:10.1002/anie.200805257.
- Pendry, J. B., A. J. Holden, D. J. Robbins, and W. J. Stewart. 1999. “Magnetism from Conductors and Enhanced Nonlinear Phenomena.” IEEE Transactions on Microwave Theory and Techniques 47: 2075–2084.
- Pendry, J. B., D. Schurig, and D. R. Smith. 2006. “Controlling Electromagnetic Fields.” Science, doi:10.1126/science.1125907.
- Rath, T., et al. 2021. “Developing an Ivory-Like Material for Stereolithography-Based Additive Manufacturing.” Applied Materials Today 23: 101016.
- Restrepo-Flórez, J. M., and M. Maldovan. 2016. “Mass Separation by Metamaterials.” Scientific Reports 6: 21971.
- Roy, T., et al. 2018. “Dynamic Metasurface Lens Based on MEMS Technology.” APL Photonics 3: 021302.
- Röhrig, M., et al. 2013. “Hot Pulling and Embossing of Hierarchical Nano- and Micro-structures.” J. Micromech. Microeng. 23, 105014. doi:10.1088/0960-1317/23/10/105014.
- Schurig, D., et al. 2006. “Metamaterial Electromagnetic Cloak at Microwave Frequencies.” Science 314: 977–980.
- Schwentenwein, M., P. Schneider, and J. Homa. 2014. “Lithography-Based Ceramic Manufacturing: A Novel Technique for Additive Manufacturing of High-Performance Ceramics.” Advances in Science and Technology 88: 60–64. https://doi.org/10.4028/www.scientific.net/ast.88.60.
- Surjadi, J. U., et al. 2019. “Mechanical Metamaterials and Their Engineering Applications.” Advanced Engineering Materials 21: 1800864.
- Theory and Phenomena of Metamaterials. 2017. edited by F. Capolino, 1–974, Boca Raton, USA: CRC Press. doi:10.1201/9781420054262.
- Tricinci, O., et al. 2015. “3D Micropatterned Surface Inspired by Salvinia Molesta Via Direct.” ACS Appl. Mater. Interfaces 46(7), 25560–25567.
- Veselago, V., L. Braginsky, V. Shklover, and C. Hafner. 2006. “Negative Refractive Index Materials.” Journal of Computational and Theoretical Nanoscience 3: 189–218.
- Wang, Q., et al. 2016. “Lightweight Mechanical Metamaterials with Tunable Negative Thermal Expansion.” Phys. Rev. Lett 117: 175901.
- Wilkinson, M., M. Dumontier, I. Aalbersberg, et al. 2016. “The FAIR Guiding Principles for Scientific Data Management and Stewardship.” Scientific Data 3: 160018. doi:10.1038/sdata.2016.18.
- Yu, N., and F. Capasso. 2014. “Flat Optics with Designer Metasurfaces.” Nature Materials 13: 139–150.
- Zadpoor, A. A. 2019. “Meta-biomaterials.” Biomaterials Science 8: 18–38.
- Zeiger, C., et al. 2016. “Microstructures of Superhydrophobic Plant Leaves - Inspiration for Efficient oil Spill Cleanup Materials.” Bioinspiration & Biomimetics 11: 056003.