The strengthening mechanism synergy of heat-treated 3D printed Al-Sc alloy

References

• Best, James P., Xavier Maeder, Johann Michler, and Adriaan B. Spierings. 2019. “Mechanical Anisotropy Investigated in TheComplex SLM-Processed Sc- and Zr-Modified Al–Mg Alloy Microstructure.” Advanced Engineering Materials 21 (3): 1801113. doi:10.1002/adem.201801113
   Web of Science ®Google Scholar
• Cabrera-Correa, Leticia, Leandro González-Rovira, Juan de Dios López-Castro, Miguel Castillo-Rodríguez, and F. Javier Botana. 2023. “Effect of the Heat Treatment on the Mechanical Properties and Microstructure of Scalmalloy® Manufactured by Selective Laser Melting (SLM) Under Certified Conditions.” Materials Characterization 196: 112549. doi:10.1016/j.matchar.2022.112549
   Web of Science ®Google Scholar
• Chen, S. Y., C. N. Kuo, Y. L. Su, J. C. Huang, Y. C. Wu, Y. H. Lin, Y. C. Chung, and C. H. Ng. 2018. “Microstructure and Fracture Properties of Open-Cell Porous Ti-6Al-4 V with High Porosity Fabricated by Electron Beam Melting.” Materials Characterization 138: 255–262. doi:10.1016/j.matchar.2018.02.016
   Web of Science ®Google Scholar
• Choy, Sing Ying, Chen-Nan Sun, Wai Jack Sin, Kah Fai Leong, Pei-Chen Su, Jun Wei, and Pan Wang. 2021. “Superior Energy Absorption of Continuously Graded Microlattices by Electron Beam Additive Manufacturing.” Virtual and Physical Prototyping 16 (1): 14–28. doi:10.1080/17452759.2020.1868656
   Web of Science ®Google Scholar
• Chua, C. K., and K. F. Leong. 2017. 3D Printing and Additive Manufacturing: Principles and Applications, 5th ed. Singapore: World Scientific.
   Google Scholar
• Chua, Chee Kai, Kah Fai Leong, and Chu Sing Lim. 2010. Rapid Prototyping: Principles and Applications. Singapore: World Scientific.
   Google Scholar
• Churyumov, A.Yu., A. V. Pozdniakov, A. S. Prosviryakov, I. S. Loginova, D. K. Daubarayte, D. K. Ryabov, V. A. Korolev, A. N. Solonin, M. D. Pavlov, and S. V. Valchuk. 2019. “Microstructure and Mechanical Properties of a Novel Selective Laser Melted Al-Mg Alloy with low Sc Content.” Materials Research Express 6 (12): 126595. doi:10.1088/2053-1591/ab5bea
   Google Scholar
• Gibson, Ian, David W Rosen, and Brent Stucker. 2010. Additive Manufacturing Technologies. New York: Springer.
   Google Scholar
• Han, Binghao, Shuiqing Liu, Xin Wang, Yingguang Liang, Yuhang Xia, and Chunxiang Cui. 2021. “Simultaneously Improving Strength and Ductility of Hybrid Al–Si Matrix Composite with Polyphasic and Multi-Scale Ceramic Particles.” Materials Science and Engineering: A 804: 140517. doi:10.1016/j.msea.2020.140517
   Web of Science ®Google Scholar
• Iwamura, S., and Y. Miura. 2004. “Loss in Coherency and Coarsening Behavior of Al3Sc Precipitates.” Acta Materialia 52 (3): 591–600. doi:10.1016/j.actamat.2003.09.042
   Web of Science ®Google Scholar
• Jägle, A. Eric., L. Lu, L. Wu, and D. Raabe. 2016. “Alloy Design for Additive Manufacturing”, 1–43.
   Google Scholar
• Jeyaprakash, N., Che-Hua Yang, and M. Saravana Kumar. 2022. “Influence of Coherent Intermetallic Nano-Precipitates on the Nano-Level Mechanical and Tribological Properties of the Laser-Powder bed Fused Scalmalloy.” Materials Characterization 193: 112269. doi:10.1016/j.matchar.2022.112269
   Web of Science ®Google Scholar
• Koutny, Daniel, Daniel Skulina, Libor Pantělejev, David Paloušek, Blanka Lenczowski, Frank Palm, and Andreas Nick. 2018. “Processing of Al-Sc Aluminum Alloy Using SLM Technology.” Procedia CIRP 74: 44–48. doi:10.1016/j.procir.2018.08.027
   Google Scholar
• Kuo, C. N., C. K. Chua, P. C. Peng, Y. W. Chen, S. L. Sing, S. Huang, and Y. L. Su. 2019. “Microstructure Evolution and Mechanical Property Response via 3D Printing Parameter Development of Al–Sc Alloy.” Virtual and Physical Prototyping 15 (1): 120–129. doi:10.1080/17452759.2019.1698967
   Web of Science ®Google Scholar
• Kuo, C. N., P. C. Peng, D. H. Liu, and C. Y. Chao. 2021. “Microstructure Evolution and Mechanical Property Response of 3D-Printed Scalmalloy with Different Heat-Treatment Times at 325oC.” Metals 11: 555. doi:10.3390/met11040555
   Google Scholar
• Li, Ruidi, Minbo Wang, Tiechui Yuan, Bo Song, Chao Chen, Kechao Zhou, and Peng Cao. 2017. “Selective Laser Melting of a Novel Sc and Zr Modified Al-6.2 Mg Alloy: Processing, Microstructure, and Properties.” Powder Technology 319: 117–128. doi:10.1016/j.powtec.2017.06.050
   Web of Science ®Google Scholar
• Liu, Y. J., S. J. Li, H. L. Wang, W. T. Hou, Y. L. Hao, R. Yang, T. B. Sercombe, and L. C. Zhang. 2016. “Microstructure,: Defects and Mechanical Behavior of Beta-Type Titanium Porous Structures Manufactured by Electron Beam Melting and Selective Laser Melting.” Acta Materialia 113: 56–67. doi:10.1016/j.actamat.2016.04.029
   Web of Science ®Google Scholar
• Liu, Shuiqing, Xin Wang, Qun Zu, Binghao Han, Xu Han, and Chunxiang Cui. 2021. “Significantly Improved Particle Strengthening of Al–Sc Alloy by High Sc Composition Design and Rapid Solidification.” Materials Science & Engineering A 800: 140304. doi:10.1016/j.msea.2020.140304
   Web of Science ®Google Scholar
• Mikhaylovskaya, A. V., A. G. Mochugovskiy, V. S. Levchenko, N.Yu. Tabachkova, W. Mufalo, and V. K. Portnoy. 2018. “Precipitation Behavior of L12 Al3Zr Phase in Al-Mg-Zr Alloy.” Materials Characterization 139: 30–37. doi:10.1016/j.matchar.2018.02.030
   Web of Science ®Google Scholar
• Murr, L. E. 2017. “Open-cellular Metal Implant Design and Fabrication for Biomechanical Compatibility with Bone Using Electron Beam Melting.” Journal of the Mechanical Behavior of Biomedical Materials 76: 164–177. doi:10.1016/j.jmbbm.2017.02.019
   PubMed Web of Science ®Google Scholar
• Schimbäck, D., P. Mair, L. Kaserer, L. Perfler, F. Palm, G. Leichtfried, and S. Pogatscher. 2022. “An Improved Process Scan Strategy to Obtain High-Performance Fatigue Properties for Scalmalloy.” Materials & Design 224: 111410. doi:10.1016/j.matdes.2022.111410
   Web of Science ®Google Scholar
• Schmidtke, K., F. Palm, A. Hawkins, and C. Emmelmann. 2011. “Process and Mechanical Properties: Applicability of a Scandium Modified Al-Alloy for Laser Additive Manufacturing.” Physics Procedia 12: 369–374. doi:10.1016/j.phpro.2011.03.047
   Google Scholar
• Sing, S. L., C. N. Kuo, C. T. Shih, C. C. Ho, and C. K. Chua. 2021. “Perspectives of Using Machine Learning in Laser Powder bed Fusion for Metal Additive Manufacturing.” Virtual and Physical Prototyping 16 (3): 372–386. doi:10.1080/17452759.2021.1944229
   Web of Science ®Google Scholar
• Sing, S. L., and W. Y. Yeong. 2020. “Laser Powder bed Fusion for Metal Additive Manufacturing: Perspectives on Recent Developments.” Virtual and Physical Prototyping 15 (3): 359–370. doi:10.1080/17452759.2020.1779999
   Web of Science ®Google Scholar
• Spierings, A. B., K. Dawson, T. Heeling, P. J. Uggowitzer, R. Schäublin, F. Palm, and K. Wegener. 2017a. “Microstructural Features of Sc- and Zr-Modified Al-Mg Alloys Processed by Selective Laser Melting.” Materials & Design 115: 52–63. doi:10.1016/j.matdes.2016.11.040
   Web of Science ®Google Scholar
• Spierings, A. B., K. Dawson, K. Kern, F. Palm, and K. Wegener. 2017b. “SLM-processed Sc- and Zr- Modified Al-Mg Alloy: Mechanical Properties and Microstructural Effects of Heat Treatment.” Materials Science & Engineering A 701: 264–273. doi:10.1016/j.msea.2017.06.089
   Web of Science ®Google Scholar
• Spierings, A. B., K. Dawson, P. J. Uggowitzer, and K. Wegener. 2018. “Influence of SLM Scan-Speed on Microstructure,: Precipitation of Al3Sc Particles and Mechanical Properties in Sc- and Zr-Modified Al-Mg Alloys.” Materials & Design 140: 134–143. doi:10.1016/j.matdes.2017.11.053
   Web of Science ®Google Scholar
• Spierings, Adriaan B., Karl Dawson, Mark Voegtlin, Frank Palm, and Peter J. Uggowitzer. 2016. “Microstructure and Mechanical Properties of as-Processed Scandium-Modified Aluminium Using Selective Laser Melting.” CIRP Annals 65 (1): 213–216. doi:10.1016/j.cirp.2016.04.057
   Web of Science ®Google Scholar
• Sudarmadji, N., J. Y. Tan, K. F. Leong, C. K. Chua, and Y. T. Loh. 2011. “Investigation of the Mechanical Properties and Porosity Relationships in Selective Laser-Sintered Polyhedral for Functionally Graded Scaffolds.” Acta Biomaterialia 7: 530–537. doi:10.1016/j.actbio.2010.09.024
   PubMed Web of Science ®Google Scholar
• Tan, Joel Heang Kuan, Swee Leong Sing, and Wai Yee Yeong. 2020. “Microstructure Modelling for Metallic Additive Manufacturing: A Review.” Virtual and Physical Prototyping 15 (1): 87–105. doi:10.1080/17452759.2019.1677345
   Web of Science ®Google Scholar
• Xu, Pian, Feng Jiang, Mengmeng Tong, Zhongqin Tang, Jingyu Jiang, Ning Yan, and Yongyi Peng. 2019. “Precipitation Characteristics and Morphological Transitions of Al3Sc Precipitates.” Journal of Alloys and Compounds 790: 509–516. doi:10.1016/j.jallcom.2019.03.256
   Web of Science ®Google Scholar
• Zhang, Z., and D. L. Chen. 2006. “*Consideration of Orowan Strengthening Effect in Particulate-Reinforced Metal Matrix Nanocomposites: A Model for Predicting Their Yield Strength.” Scripta Materialia 54: 1321–1326. doi:10.1016/j.scriptamat.2005.12.017
   Web of Science ®Google Scholar
• Zhao, Xiao Li, Shu Jun Li, Man Zhang, Yan Dong Liu, Timothy B. Sercombe, Shao Gang Wang, Yu Lin Hao, Rui Yang, and Lawrence E. Murr. 2016. “Comparison of the Microstructures and Mechanical Properties of Ti–6Al–4 V Fabricated by Selective Laser Melting and Electron Beam Melting.” Materials & Design 95: 21–31. doi:10.1016/j.matdes.2015.12.135
   Web of Science ®Google Scholar