Robot-assisted conformal additive manufacturing for continuous fibre-reinforced grid-stiffened shell structures

References

• Alhijaily, Abdullah, Zekai Murat Kilic, and A. N. Paulo Bartolo. 2023. “Teams of Robots in Additive Manufacturing: A Review.” Virtual and Physical Prototyping 18 (1), doi:10.1080/17452759.2022.2162929.
   Web of Science ®Google Scholar
• Alkadi, Faez, Kyung Chang Lee, Abdullateef H. Bashiri, and Jae Won Choi. 2020. “Conformal Additive Manufacturing Using a Direct-Print Process.” Additive Manufacturing 32 (March): 100975. doi:10.1016/j.addma.2019.100975.
   Google Scholar
• Badarinath, Rakshith, and Vittaldas Prabhu. 2021. “Integration and Evaluation of Robotic Fused Filament Fabrication System.” Additive Manufacturing 41 (May): 101951. doi:10.1016/j.addma.2021.101951.
   Google Scholar
• Bhatt, Prahar M., Ariyan M. Kabir, Max Peralta, Hugh A. Bruck, and Satyandra K. Gupta. 2019. “A Robotic Cell for Performing Sheet Lamination-Based Additive Manufacturing.” Additive Manufacturing 27 (May): 278–289. doi:10.1016/j.addma.2019.02.002.
   Google Scholar
• Bhatt, Prahar M., Rishi K. Malhan, Aniruddha v. Shembekar, Yeo Jung Yoon, and Satyandra K. Gupta. 2020. “Expanding Capabilities of Additive Manufacturing Through Use of Robotics Technologies: A Survey.” Additive Manufacturing 31 (January): 100933. doi:10.1016/j.addma.2019.100933.
   Google Scholar
• Bi, Danjie, Fubao Xie, and Kai Tang. 2021. “Generation of Efficient Iso-Planar Printing Path for Multi-Axis FDM Printing.” Journal of Manufacturing and Materials Processing 5 (2): 59. doi:10.3390/jmmp5020059.
   Google Scholar
• Billah, Kazi Md Masum, Fernando A.R. Lorenzana, Nikki L. Martinez, Ryan B. Wicker, and David Espalin. 2020. “Thermomechanical Characterization of Short Carbon Fiber and Short Glass Fiber-Reinforced ABS Used in Large Format Additive Manufacturing.” Additive Manufacturing 35 (October): 101299. doi:10.1016/j.addma.2020.101299.
   Google Scholar
• Bo, Pengbo, Yujian Zheng, Xiaohong Jia, and Caiming Zhang. 2019. “Multi-Strip Smooth Developable Surfaces from Sparse Design Curves.” Computer-Aided Design 114 (September): 1–12. doi:10.1016/J.CAD.2019.05.001.
   Google Scholar
• Chen, Xiangjia, Guoxin Fang, Wei Hsin Liao, and Charlie C.L. Wang. 2022. “Field-Based Toolpath Generation for 3D Printing Continuous Fibre Reinforced Thermoplastic Composites.” Additive Manufacturing 49 (January), doi:10.1016/J.ADDMA.2021.102470.
   Google Scholar
• Choi, Pui Tung, and Lok Ming Lui. 2015. “Fast Disk Conformal Parameterization of Simply-Connected Open Surfaces.” Journal of Scientific Computing 65 (3): 1065–1090. doi:10.1007/s10915-015-9998-2.
   Web of Science ®Google Scholar
• Cui, Xiangyang, She Li, Hui Feng, and Guangyao Li. 2017. “A Triangular Prism Solid and Shell Interactive Mapping Element for Electromagnetic Sheet Metal Forming Process.” Journal of Computational Physics 336 (May): 192–211. doi:10.1016/J.JCP.2017.02.014.
   Google Scholar
• Dickson, Andrew N., James N. Barry, Kevin A. McDonnell, and Denis P. Dowling. 2017. “Fabrication of Continuous Carbon, Glass and Kevlar Fibre Reinforced Polymer Composites Using Additive Manufacturing.” Additive Manufacturing 16 (August): 146–152. doi:10.1016/j.addma.2017.06.004.
   Google Scholar
• Ehsani, Amir, and Hamid Dalir. 2019. “Multi-Objective Optimization of Composite Angle Grid Plates for Maximum Buckling Load and Minimum Weight Using Genetic Algorithms and Neural Networks.” Composite Structures 229 (December): 111450. doi:10.1016/j.compstruct.2019.111450.
   Google Scholar
• Fang, Guoxin, Tianyu Zhang, Sikai Zhong, Xiangjia Chen, Zichun Zhong, and Charlie C.L. Wang. 2020. “Reinforced FDM.” ACM Transactions on Graphics 39 (6), doi:10.1145/3414685.3417834.
   Web of Science ®Google Scholar
• Gibson, Brian T., Paritosh Mhatre, Michael C. Borish, Celeste E. Atkins, John T. Potter, Joshua E. Vaughan, and Lonnie J. Love. 2022. “Controls and Process Planning Strategies for 5-Axis Laser Directed Energy Deposition of Ti-6Al-4V Using an 8-Axis Industrial Robot and Rotary Motion.” Additive Manufacturing 58 (October): 103048. doi:10.1016/j.addma.2022.103048.
   Google Scholar
• Goh, Guo Dong, Song Jiang Casper Neo, Vishwesh Dikshit, and Wai Yee Yeong. 2022. “Quasi-Static Indentation and Sound-Absorbing Properties of 3D Printed Sandwich Core Panels.” Journal of Sandwich Structures & Materials 24 (2): 1206–1225. doi:10.1177/10996362211037015.
   Web of Science ®Google Scholar
• Goh, G. D., V. Dikshit, A. P. Nagalingam, G. L. Goh, S. Agarwala, S. L. Sing, J. Wei, and W. Y. Yeong. 2018. “Characterization of Mechanical Properties and Fracture Mode of Additively Manufactured Carbon Fiber and Glass Fiber Reinforced Thermoplastics.” Materials & Design 137 (January): 79–89. doi:10.1016/j.matdes.2017.10.021.
   Google Scholar
• Goh, Guo Liang, Haining Zhang, Tzyy Haur Chong, and Wai Yee Yeong. 2021. “3D Printing of Multilayered and Multimaterial Electronics: A Review.” Advanced Electronic Materials 7 (10): 2100445. doi:10.1002/aelm.202100445.
   Web of Science ®Google Scholar
• Gu, David Xianfeng, Feng Luo, and Shing Tung Yau. 2010. “Fundamentals of Computational Conformal Geometry.” Mathematics in Computer Science 4 (4): 389–429. doi:10.1007/S11786-011-0065-6.
   Google Scholar
• Gu, Xianfeng, Yalin Wang, Tony F. Chan, Paul M. Thompson, and Shing Tung Yau. 2004. “Genus Zero Surface Conformal Mapping and Its Application to Brain Surface Mapping.” IEEE Transactions on Medical Imaging 23 (8): 949–958. doi:10.1109/TMI.2004.831226.
   PubMed Web of Science ®Google Scholar
• Gu, Xianfeng David, Wei Zeng, Feng Luo, and Shing Tung Yau. 2012. “Numerical Computation of Surface Conformal Mappings.” Computational Methods and Function Theory 11 (2): 747–787. doi:10.1007/BF03321885.
   Web of Science ®Google Scholar
• Hou, Zhanghao, Xiaoyong Tian, Ziqi Zheng, Junkang Zhang, Lu Zhe, Dichen Li, Andrei V. Malakhov, and Alexander N. Polilov. 2020. “A Constitutive Model for 3D Printed Continuous Fiber Reinforced Composite Structures with Variable Fiber Content.” Composites Part B: Engineering 189 (May): 107893. doi:10.1016/J.COMPOSITESB.2020.107893.
   Google Scholar
• Jiang, Caigui, Kaust Cheng Wang, Kaust Florian Rist, Tu Wien Johannes Wallner, Tu Graz, Cheng Wang, Florian Rist, Tu Wien, Johannes Wallner, and Helmut Pottmann. 2020. “Quad-Mesh Based Isometric Mappings and Developable Surfaces.” ACM Transactions on Graphics 39 (4): 13. doi:10.1145/3386569.3392430.
   Web of Science ®Google Scholar
• Jiang, Jingchao, Xun Xu, and Jonathan Stringer. 2019. “Optimisation of Multi-Part Production in Additive Manufacturing for Reducing Support Waste.” Virtual and Physical Prototyping 14 (3): 219–228. doi:10.1080/17452759.2019.1585555.
   Web of Science ®Google Scholar
• Jin, Miao, Xianfeng Gu, Ying He and Yalin Wang. 2022. “Conformal Geometry Computational Algorithms and Engineering Applications.” Accessed September 4.
   Google Scholar
• Khamayseh, Ahmed, and C. Wayne Mastin. 1996. “Computational Conformal Mapping for Surface Grid Generation.” Journal of Computational Physics 123 (2): 394–401. doi:10.1006/jcph.1996.0032.
   Web of Science ®Google Scholar
• Konaković, Mina, Keenan Crane, Bailin Deng, Sofien Bouaziz, Daniel Piker, and Mark Pauly. 2016. “Beyond Developable.” ACM Transactions on Graphics 35 (4), doi:10.1145/2897824.2925944.
   Web of Science ®Google Scholar
• Kubalak, Joseph R., Alfred L. Wicks, and Christopher B. Williams. 2018. “Using Multi-Axis Material Extrusion to Improve Mechanical Properties Through Surface Reinforcement.” Virtual and Physical Prototyping 13 (1): 32–38. doi:10.1080/17452759.2017.1392686.
   Web of Science ®Google Scholar
• Liang, Fusheng, Chengwei Kang, and Fengzhou Fang. 2020. “A Smooth Tool Path Planning Method on NURBS Surface Based on the Shortest Boundary Geodesic Map.” Journal of Manufacturing Processes 58 (October): 646–658. doi:10.1016/j.jmapro.2020.08.047.
   Google Scholar
• Lingappan, Niranjanmurthi, Sungmook Lim, Guk Hwan Lee, Huynh Thanh Tung, Van Hoang Luan, and Wonoh Lee. 2022. “Recent Advances on Fiber-Reinforced Multifunctional Composites for Structural Supercapacitors.” Functional Composites and Structures 4 (1): 012001. doi:10.1088/2631-6331/ac4de9.
   Google Scholar
• Liu, Guang, Yi Xiong, and Limin Zhou. 2021. “Additive Manufacturing of Continuous Fiber Reinforced Polymer Composites: Design Opportunities and Novel Applications.” Composites Communications 27 (October): 100907. doi:10.1016/J.COCO.2021.100907.
   Google Scholar
• Maes, Vincent K., Leonid Pavlov, and Sahak M.(Samo) Simonian. 2019. “An Efficient Semi-Automated Optimisation Approach for (Grid-Stiffened) Composite Structures: Application to Ariane 6 Interstage.” Composite Structures 209 (February): 1042–1049. doi:10.1016/j.compstruct.2016.02.082.
   Google Scholar
• Matsuzaki, Ryosuke, Masahito Ueda, Masaki Namiki, Tae Kun Jeong, Hirosuke Asahara, Keisuke Horiguchi, Taishi Nakamura, Akira Todoroki, and Yoshiyasu Hirano. 2016. “Three-Dimensional Printing of Continuous-Fiber Composites by in-Nozzle Impregnation.” Scientific Reports 6 (1): 1–7. doi:10.1038/srep23058.
   PubMedGoogle Scholar
• Naranjo-Lozada, Juan, Horacio Ahuett-Garza, Pedro Orta-Castañón, Wilco M.H. Verbeeten, and Daniel Sáiz-González. 2019. “Tensile Properties and Failure Behavior of Chopped and Continuous Carbon Fiber Composites Produced by Additive Manufacturing.” Additive Manufacturing 26 (March): 227–241. doi:10.1016/j.addma.2018.12.020.
   Google Scholar
• Nault, Isaac M., Gehn D. Ferguson, and Aaron T. Nardi. 2021. “Multi-Axis Tool Path Optimization and Deposition Modeling for Cold Spray Additive Manufacturing.” Additive Manufacturing 38 (February): 101779. doi:10.1016/j.addma.2020.101779.
   Google Scholar
• Nelson, Todd G., Trent K. Zimmerman, Spencer P. Magleby, Robert J. Lang, and Larry L. Howell. 2019. “Developable Mechanisms on Developable Surfaces.” Science Robotics 4 (27), doi:10.1126/SCIROBOTICS.AAU5171/SUPPL_FILE/AAU5171_SM.PDF.
   Web of Science ®Google Scholar
• Nuh, Mishael, Robin Oval, John Orr, and Paul Shepherd. 2022. “Digital Fabrication of Ribbed Concrete Shells Using Automated Robotic Concrete Spraying.” Additive Manufacturing 59 (November): 103159. doi:10.1016/J.ADDMA.2022.103159.
   Google Scholar
• Parandoush, Pedram, Levi Tucker, Chi Zhou, and Dong Lin. 2017. “Laser Assisted Additive Manufacturing of Continuous Fiber Reinforced Thermoplastic Composites.” Materials & Design 131 (October): 186–195. doi:10.1016/j.matdes.2017.06.013.
   Google Scholar
• Parker, M., A. Inthavong, E. Law, S. Waddell, N. Ezeokeke, R. Matsuzaki, and D. Arola. 2022. “3D Printing of Continuous Carbon Fiber Reinforced Polyphenylene Sulfide: Exploring Printability and Importance of Fiber Volume Fraction.” Additive Manufacturing 54 (June): 102763. doi:10.1016/j.addma.2022.102763.
   Google Scholar
• Pedersen, David Bue, Eyþór Rúnar Eiríksson, Hans Nørgaard Hansen, and Jakob Skov Nielsen. 2016. “A Self-Calibrating Robot Based upon a Virtual Machine Model of Parallel Kinematics.” Virtual and Physical Prototyping 11 (3): 227–234. doi:10.1080/17452759.2016.1208363.
   Web of Science ®Google Scholar
• Qiao, Jing, Yingrui Li, and Longqiu Li. 2019. “Ultrasound-Assisted 3D Printing of Continuous Fiber-Reinforced Thermoplastic (FRTP) Composites.” Additive Manufacturing 30 (December): 100926. doi:10.1016/j.addma.2019.100926.
   Google Scholar
• Shembekar, Aniruddha v, Yeo Jung Yoon, Alec Kanyuck, and Satyandra K. Gupta. 2019. “Generating Robot Trajectories for Conformal Three-Dimensional Printing Using Nonplanar Layers.” Journal of Computing and Information Science in Engineering 19 (3), doi:10.1115/1.4043013/726284.
   PubMed Web of Science ®Google Scholar
• Sieberer, Stefan, Chethan Savandaiah, Jürgen Leßlhumer, and Martin Schagerl. 2022. “Shear Property Measurement of Additively Manufactured Continuous Fibre Reinforced Plastics by In-Plane Torsion Testing.” Additive Manufacturing 55 (July): 102805. doi:10.1016/j.addma.2022.102805.
   Google Scholar
• Suzuki, Takuya, Shinya Fukushige, and Mitsuyoshi Tsunori. 2020. “Load Path Visualization and Fiber Trajectory Optimization for Additive Manufacturing of Composites.” Additive Manufacturing 31 (January): 100942. doi:10.1016/j.addma.2019.100942.
   Google Scholar
• Tan, Wen See, Muhammad Aidil bin Juhari, Qian Shi, Shengyang Chen, Domenico Campolo, and Juha Song. 2020. “Development of a New Additive Manufacturing Platform for Direct Freeform 3D Printing of Intrinsically Curved Flexible Membranes.” Additive Manufacturing 36 (December): 101563. doi:10.1016/J.ADDMA.2020.101563.
   Google Scholar
• Totaro, G., P. Spena, G. Giusto, F. de Nicola, S. Kiryenko, and S. Das. 2021. “Highly Efficient CFRP Anisogrid Lattice Structures for Central Tubes of Medium-Class Satellites: Design, Manufacturing, and Performance.” Composite Structures 258 (February): 113368. doi:10.1016/j.compstruct.2020.113368.
   Google Scholar
• van de Werken, Nekoda, Pratik Koirala, Jafar Ghorbani, Derek Doyle, and Mehran Tehrani. 2021. “Investigating the Hot Isostatic Pressing of an Additively Manufactured Continuous Carbon Fiber Reinforced PEEK Composite.” Additive Manufacturing 37 (January): 101634. doi:10.1016/j.addma.2020.101634.
   Google Scholar
• van de Werken, Nekoda, Halil Tekinalp, Pouria Khanbolouki, Soydan Ozcan, Andrew Williams, and Mehran Tehrani. 2020. “Additively Manufactured Carbon Fiber-Reinforced Composites: State of the Art and Perspective.” Additive Manufacturing 31 (January): 100962. doi:10.1016/j.addma.2019.100962.
   Google Scholar
• Vasiliev, V. V., V. A. Barynin, and A. F. Razin. 2012. “Anisogrid Composite Lattice Structures – Development and Aerospace Applications.” Composite Structures 94 (3): 1117–1127. doi:10.1016/j.compstruct.2011.10.023.
   Web of Science ®Google Scholar
• Wang, Hao, Jie Tao, Kai Jin, Xiaoyue Wang, and Ying Dong. 2022. “Multifunctional Pressure/Temperature/Bending Sensor Made of Carbon Fibre-Multiwall Carbon Nanotubes for Artificial Electronic Application.” Composites Part A: Applied Science and Manufacturing 154 (March): 106796. doi:10.1016/j.compositesa.2021.106796.
   Google Scholar
• Wang, Yaohui, Guoquan Zhang, Huilin Ren, Guang Liu, and Yi Xiong. 2022. “Fabrication Strategy for Joints in 3D Printed Continuous Fiber Reinforced Composite Lattice Structures.” Composites Communications 30 (February): 101080. doi:10.1016/j.coco.2022.101080.
   Google Scholar
• Xiong, Yi, Sang In Park, Suhasini Padmanathan, Audelia Gumarus Dharmawan, Shaohui Foong, David William Rosen, and Gim Song Soh. 2019. “Process Planning for Adaptive Contour Parallel Toolpath in Additive Manufacturing with Variable Bead Width.” The International Journal of Advanced Manufacturing Technology 105 (10): 4159–4170. doi:10.1007/s00170-019-03954-1.
   Web of Science ®Google Scholar
• Xu, Ke, Yingguang Li, Lufeng Chen, and Kai Tang. 2019. “Curved Layer Based Process Planning for Multi-Axis Volume Printing of Freeform Parts.” Computer-Aided Design 114 (September): 51–63. doi:10.1016/J.CAD.2019.05.007.
   Google Scholar
• Zeng, Chengjun, Liwu Liu, Wenfeng Bian, Jinsong Leng, and Yanju Liu. 2021. “Compression Behavior and Energy Absorption of 3D Printed Continuous Fiber Reinforced Composite Honeycomb Structures with Shape Memory Effects.” Additive Manufacturing 38 (February): 101842. doi:10.1016/j.addma.2021.101842.
   Google Scholar
• Zhang, Zhongsen, Yu Long, Zhe Yang, Kunkun Fu, and Yan Li. 2022. “An Investigation Into Printing Pressure of 3D Printed Continuous Carbon Fiber Reinforced Composites.” Composites Part A: Applied Science and Manufacturing 162 (November): 107162. doi:10.1016/j.compositesa.2022.107162.
   Google Scholar
• Zhang, Guoquan, Yaohui Wang, Jian He, and Yi Xiong. 2023. “A Graph-Based Path Planning Method for Additive Manufacturing of Continuous Fiber-Reinforced Planar Thin-Walled Cellular Structures.” Rapid Prototyping Journal, 29 (2): 344–353. doi:10.1108/RPJ-01-2022-0027/FULL/XML.
   Web of Science ®Google Scholar
• Zhang, Guoquan, Yaohui Wang, Wanglin Qiu, Ke Dong, and Yi Xiong. 2022. “Geometric Characteristics of Single Bead Fabricated by Continuous Fiber Reinforced Polymer Composite Additive Manufacturing.” Materials Today: Proceedings 70. doi:10.1016/J.MATPR.2022.09.361.
   PubMedGoogle Scholar
• Zhao, Donghua, and Weizhong Guo. 2020. “Shape and Performance Controlled Advanced Design for Additive Manufacturing: A Review of Slicing and Path Planning.” Journal of Manufacturing Science and Engineering, Transactions of the ASME 142 (1), doi:10.1115/1.4045055/1046939.
   Web of Science ®Google Scholar
• Zhou, Ying, Liang Gao, and Hao Li. 2022. “Graded Infill Design Within Free-Form Surfaces by Conformal Mapping.” International Journal of Mechanical Sciences 224 (June): 107307. doi:10.1016/j.ijmecsci.2022.107307.
   Google Scholar
• Zolfagharian, Ali, M. A. Parvez Mahmud, Saleh Gharaie, Mahdi Bodaghi, Abbas Z. Kouzani, and Akif Kaynak. 2020. “3D/4D-Printed Bending-Type Soft Pneumatic Actuators: Fabrication, Modelling, and Control.” Virtual and Physical Prototyping 15 (4): 373–402. doi:10.1080/17452759.2020.1795209.
   Web of Science ®Google Scholar