References
- Lewandowski JJ, Seifi M. Metal additive manufacturing: a review of mechanical properties. Ann Rev Mater Res. 2016;46:151–186. https://www.annualreviews.org/doi/abs/10.1146annurev-matsci-070115-032024.
- Najmon JC, Raeisi S, Tovar A. 2 - Review of additive manufacturing technologies and applications in the aerospace industry. Addit Manuf Aerosp Ind. 2019: 7–31. doi:10.1016/B978-0-12-814062-8.00002-9
- Altıparmak SC, Yardley VA, Shi Z, et al. Challenges in additive manufacturing of high-strength aluminium alloys and current developments in hybrid additive manufacturing. Int J Lightweight Mater Manuf. 2021;4(2):246–261. doi:10.1016/j.ijlmm.2020.12.004
- DebRoy T, Wei HL, Zuback JS, et al. Additive manufacturing of metallic components – Process, structure and properties. Prog Mater Sci. 2018;92:112–224. doi:10.1016/j.pmatsci.2017.10.001. A. Alessandro, L. Adrian, L. Erica, F. Alessandro, Laser Directed Energy Deposition of Bulk 316L Stainless Steel, Lasers Manuf. Mater. Process. 7 (2020) 426-448, https://doi.org/10.1007/s40516-020-00128-w.
- Garcia-Colomo A, Wood D, Martina F, et al. A comparison framework to support the selection of the best additive manufacturing process for specific aerospace applications. Int J Rapid Manuf. 2020;9(3):194–211. doi:10.1504/IJRAPIDM.2020.10019230
- Lin Z, Song K, Yu X. A review on wire and arc additive manufacturing of titanium alloy. J Manuf Process. 2021;70:24–45. doi:10.1016/j.jmapro.2021.08.018
- Thomas L, Dylan R, Ehsan R, et al. Large-scale metal additive manufacturing: a holistic review of the state of the art and challenges. Int Mater Rev. 2022;67(4):410–459. doi:10.1080/09506608.2021.1971427
- Babu SS, Lonnie LJ, Peter WH, Dehoff R. Workshop report on additive manufacturing for large-scale metal components - development and deployment of metal big-area-additive-manufacturing (Large-Scale Metals AM) System, Technical Report, United States, 2016. doi:10.2172/1325459
- Sun J, Yu H, Zeng D, et al. Wire–powder–arc additive manufacturing: a viable strategy to fabricate carbide ceramic/aluminum alloy multi-material structures. Addit Manuf. 2022;51; doi:10.1016/j.addma.2022.102637
- Alessandro A, Adrian L, Erica L, et al. Laser directed energy deposition of bulk 316L stainless steel. Lasers Manuf Mater Process. 2020;7:426–448. doi:10.1007/s40516-020-00128-w
- Moghazi S, Wolfe T, Ivey D, et al. Plasma transfer arc additive manufacturing of 17-4 PH: assessment of defects. Int J Adv Manuf Technol. 2020;108:2301–2313. https://api.semanticscholar.org/CorpusID:253674910.
- Yu Y, Xiong J, Chen Y, et al. Process stability control of corner structures in robotic gas tungsten arc additive manufacturing via arc sensing. J Manuf Process. 2023;101:156–170. doi:10.1016/j.jmapro.2023.05.076
- Xiong J, Wen C. Arc plasma, droplet, and forming behaviors in bypass wire arc-directed energy deposition. Addit Manuf. 2023;70:103558. doi:10.1016/j.addma.2023.103558
- Ziółkowski M, Dyl T. Possible applications of additive manufacturing technologies in shipbuilding: a review. Machines. 2020;8(4):84. doi:10.3390/machines8040084
- He T, Yu S, Shi Y, et al. Forming and mechanical properties of wire arc additive manufacture for marine propeller bracket. J Manuf Process. 2020;52:96–105. doi:10.1016/j.jmapro.2020.01.053
- Li Y, Su C, Zhu J. Comprehensive review of wire arc additive manufacturing: hardware system, physical process, monitoring, property characterization, application and future prospects. Results Eng. 2022;13:100330. doi:10.1016/j.rineng.2021.100330
- Greer C, Nycz A, Noakes M, et al. Introduction to the design rules for metal big area additive manufacturing. Addit Manuf. 2019;27:159–166. doi:10.1016/j.addma.2019.02.016
- Dai Y, Yu S, Shi Y, et al. Wire and arc additive manufacture of high-building multi-directional pipe joint. Int J Adv Manuf Technol. 2018;96:2389–2396. doi:10.1007/s00170-018-1742-2
- Li Y, Huang X, Horváth I, et al. GMAW-based additive manufacturing of inclined multi-layer multi-bead parts with flat-position deposition. J Mater Process Technol. 2018;262:359–371. doi:10.1016/j.jmatprotec.2018.07.01
- Jafari D, Vaneker THJ, Gibson I. Wire and arc additive manufacturing: opportunities and challenges to control the quality and accuracy of manufactured parts. Mater Des. 2021;202:109471. doi:10.1016/j.matdes.2021.109471
- Xiong J, Zhang G, Gao H, et al. Modeling of bead section profile and overlapping beads with experimental validation for robotic GMAW-based rapid manufacturing. Robot Comput Integr Manuf. 2013;29:417–423. doi:10.1016/j.rcim.2012.09.011
- Li Y, Sun Y, Han Q, et al. Enhanced beads overlapping model for wire and arc additive manufacturing of multi-layer multi-bead metallic parts. J Mater Process Technol. 2018;252:838–848. doi:10.1016/j.jmatprotec.2017.10.017
- Ding D, Pan Z, Cuiuri D, et al. Wire-feed additive manufacturing of metal components: technologies, developments and future interests. Int J Adv Manuf Technol. 2015;81:465–481. doi:10.1007/s00170-015-7077-3
- Babu SS, Lonnie LJ, Peter WH, Dehoff R. Workshop report on additive manufacturing for large-scale metal components - development and deployment of metal big-area-additive-manufacturing (Large-Scale Metals AM) System, Technical Report, United States, 2016. doi:10.2172/1325459
- Lei Y, Xiong J, Li R. Effect of inter layer idle time on thermal behavior for multi-layer single-pass thin-walled parts in GMAW-based additive manufacturing. Int J Adv Manuf Technol. 2018;96:1355–1365. doi:10.1007/s00170-018-1699-1
- He T, Yu S, Huang A, et al. Path planning and forming of wire multi-arc additive collaborative manufacture for marine propeller bracket. J Manuf Process. 2021;68:1191–1201. doi:10.1016/j.jmapro.2021.06.028
- Reisgen U, Sharma R, Oster L. Plasma multiwire technology with alternating wire feed for tailor-made material properties in wire and arc additive manufacturing. Metals (Basel). 2019;9(7):745. doi:10.3390/met9070745
- Han Q, Gao J, Han C, et al. Experimental investigation on improving the deposition rate of gas metal arc-based additive manufacturing by auxiliary wire feeding method. Weld World. 2021;65:35–45. doi:10.1007/s40194-020-00994-0
- Urhal P, Weightman A, Diver C, et al. Robot assisted additive manufacturing: a review. Robot Comput-Integr Manuf. 2019;59:335–345. doi:10.1016/j.rcim.2019.05.005
- Zhang X, Li M, Lim JH, et al. Large-scale 3D printing by a team of mobile robots. Autom Constr. 2018;95:98–106. doi:10.1016/j.autcon.2018.08.004
- Bhatt PM, Nycz A, Gupta SK. Optimizing multi-robot placements for wire arc additive manufacturing, in: Proceedings of the 2022 International Conference on Robotics and Automation (ICRA), 2022, pp. 7942–7948.
- M. Manoharan, A.N. Shridhar, V.Y. Vinod, S. Kumaraguru, A novel volume decomposition methodology for multi-robots collaborative additive manufacturing, in: Proceedings of the 2020 IEEE 4th Conference on Information & Communication Technology (CICT), 2020, pp. 1-6.
- Shen H, Pan L, Qian J. Research on large-scale additive manufacturing based on multi-robot collaboration technology. Addit Manuf. 2019;30:100906. doi:10.1016/j.addma.2019.100906
- Ding D, Pan Z, Cuiuri D, et al. Adaptive path planning for wire-feed additive manufacturing using medial axis transformation. J Clean Prod. 2016;133:942–952. doi:10.1016/j.jclepro.2016.06.036
- Panchu KP, Rajmohan M, Sundar R, et al. Multi-objective optimisation of multi-robot task allocation with precedence constraints. Def Sci J. 2018;68:175–182. doi:10.14429/dsj.68.11187
- Li S, Xu X, Zuo L. Task assignment of multi-robot systems based on improved genetic algorithms. Proceedings of the 2015 IEEE International Conference on Mechatronics and Automation (ICMA), 2015, pp. 1430–101435.
- Suslova E, Fazli P. Multi-robot task allocation with time window and ordering constraints. Proceedings of the 2020 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), 2020, pp. 6909–6916.
- Poudel L, Zhou W, Sha Z. Resource-constrained scheduling for multi-robot cooperative three-dimensional printing. J Mech Des. 2021;143:072002. doi:10.1115/1.4050380
- McPherson J, Zhou W. A chunk-based slicer for cooperative 3D printing. Rapid Prototyp J. 2018;24(9):1436–1446. doi:10.1108/RPJ-07-2017-0150