The enhanced mechanical properties of laser powder bed fusion Al-Mn-Sc alloy via non-isothermal aging

References

• Zhang J, Song B, Wei Q, et al. A review of selective laser melting of aluminum alloys: processing, microstructure, property and developing trends. J Mater Sci Technol. 2019;35:270–284. doi:10.1016/j.jmst.2018.09.004
   Web of Science ®Google Scholar
• Liu M, Wei K, Zhou R, et al. Microstructure and mechanical property of high power laser powder bed fusion AlSi10Mg alloy before and after T6 heat treatment. Virtual Phys Prototyp. 2022;17:749–767. doi:10.1080/17452759.2022.2068294
   Web of Science ®Google Scholar
• Grushko B, Balanetskyy S. A study of phase equilibria in the Al-rich part of the Al–Mn alloy system. Int J Mater Res. 2008;99:1319–1323. doi:10.3139/146.101768
   Web of Science ®Google Scholar
• Mair P, Letofsky-Papst I, Leichtfried G. Microstructural features and mechanical properties of a novel Ti- and Zr-modified Al-Mn alloy processed by laser powder bed fusion. J Alloys Compd. 2022;897:1–10. doi:10.1016/j.jallcom.2021.163156
   Web of Science ®Google Scholar
• Mochugovskiy AG, Tabachkova NY, Mikhaylovskaya AV. Nanodispersoids of the quasicrystalline I-phase in Mn- and Mg-bearing aluminum-based alloys. Mater Lett. 2021;284:1–5. doi:10.1016/j.matlet.2020.128945
   Web of Science ®Google Scholar
• DebRoy T, Wei HL, Zuback JS, et al. Additive manufacturing of metallic components – process, structure and properties. Prog Mater Sci. 2018;92:112–224. doi:10.1016/j.pmatsci.2017.10.001
   Web of Science ®Google Scholar
• Zhao D, Han C, Peng B, et al. Corrosion fatigue behavior and anti-fatigue mechanisms of an additively manufactured biodegradable zinc-magnesium gyroid scaffold. Acta Biomater. 2022;153:614–629. doi:10.1016/j.actbio.2022.09.047
   PubMed Web of Science ®Google Scholar
• Yu W, Xiao Z, Zhang X, et al. Processing and characterization of crack-free 7075 aluminum alloys with elemental Zr modification by laser powder bed fusion. Mater Sci Addit Manuf. 2022;1:1–11. doi:10.18063/msam.v1i1.4
   Google Scholar
• Kuo CN, Chua CK, Peng PC, et al. Microstructure evolution and mechanical property response via 3D printing parameter development of Al–Sc alloy. Virtual Phys Prototyp. 2020;15:120–129. doi:10.1080/17452759.2019.1698967
   Web of Science ®Google Scholar
• Zhang H, Gu D, Dai D. Laser printing path and its influence on molten pool configuration, microstructure and mechanical properties of laser powder bed fusion processed rare earth element modified Al-Mg alloy. Virtual Phys Prototyp. 2022;17:308–328. doi:10.1080/17452759.2022.2036530
   Web of Science ®Google Scholar
• Qi Y, Zhang H, Yang X, et al. Achieving superior high-temperature mechanical properties in Al-Cu-Li-Sc-Zr alloy with nano-scale microstructure via laser additive manufacturing. Materials Research Letters. 2024;12:17–25. doi:10.1080/21663831.2023.2285388
   Web of Science ®Google Scholar
• Martin JH, Yahata BD, Hundley JM, et al. 3D printing of high-strength aluminium alloys. Nature. 2017;549:365–369. doi:10.1038/nature23894
   PubMed Web of Science ®Google Scholar
• Zhang X, Xiao Z, Yu W, et al. Influence of erbium addition on the defects of selective laser-melted 7075 aluminium alloy. Virtual Phys Prototyp. 2022;17:406–418. doi:10.1080/17452759.2021.1990358
   Web of Science ®Google Scholar
• Sun Y, Wang J, Shi Y, et al. An SLM-processed Er- and Zr-modified Al–Mg alloy: microstructure and mechanical properties at room and elevated temperatures. Mater Sci Eng A. 2023;883:1–12. doi:10.1016/j.msea.2023.145485
   Web of Science ®Google Scholar
• Spierings AB, Dawson K, Kern K, et al. SLM-processed Sc- and Zr- modified Al-Mg alloy: mechanical properties and microstructural effects of heat treatment. Mater Sci Eng A. 2017;701:264–273. doi:10.1016/j.msea.2017.06.089
   Web of Science ®Google Scholar
• Yuan S, Wu M, Yin X, et al. Synchronous improvement of strength and corrosion resistance by an improved variable-rate non-isothermal aging process in Al-Zn-Mg-Cu alloy. Mater Charact. 2024;207:1–15. doi:10.1016/j.matchar.2023.113491
   Web of Science ®Google Scholar
• Wang J, Xie J, Mao Z, et al. Microstructure evolution and mechanical properties of the Al-Cu-Mg-Ag alloy during non-isothermal aging. J Alloys Compd. 2023;942:1–12. doi:10.1016/j.jallcom.2023.169031
   Web of Science ®Google Scholar
• Nicolas M, Deschamps A. Characterisation and modelling of precipitate evolution in an Al–Zn–Mg alloy during non-isothermal heat treatments. Acta Mater. 2003;51:6077–6094. doi:10.1016/S1359-6454(03)00429-4
   Web of Science ®Google Scholar
• Staley JT, Durham N. (2007). “Method and process of non-isothermal aging for aluminum alloys.” Us Patent 20070267113A1.
   Google Scholar
• Zang C, Xiao W, Fu Y, et al. Enhanced properties and homogeneity of Al-Zn-Mg-Cu alloy thick plate by non-isothermal aging. J Alloys Compd. 2023;952:1–16. doi:10.1016/j.jallcom.2023.170023
   Web of Science ®Google Scholar
• Jiang JT, Xiao WQ, Yang L, et al. Ageing behavior and stress corrosion cracking resistance of a non-isothermally aged Al–Zn–Mg–Cu alloy. Mater Sci Eng A. 2014;605:167–175. doi:10.1016/j.msea.2014.03.023
   Web of Science ®Google Scholar
• Liu Y, Jiang D, Li B, et al. Effect of cooling aging on microstructure and mechanical properties of an Al–Zn–Mg–Cu alloy. Mater Des. 2014;57:79–86. doi:10.1016/j.matdes.2013.12.024
   Web of Science ®Google Scholar
• Peng X, Guo Q, Liang X, et al. Mechanical properties, corrosion behavior and microstructures of a non-isothermal ageing treated Al-Zn-Mg-Cu alloy. Mater Sci Eng A. 2017;688:146–154. doi:10.1016/j.msea.2017.01.086
   Web of Science ®Google Scholar
• Jia Q, Zhang F, Rometsch P, et al. Precipitation kinetics, microstructure evolution and mechanical behavior of a developed Al–Mn–Sc alloy fabricated by selective laser melting. Acta Mater. 2020;193:239–251. doi:10.1016/j.actamat.2020.04.015
   Web of Science ®Google Scholar
• Wang M, Li R, Yuan T, et al. The evolution of quasicrystal during additive manufacturing and aging treatment of a Si-modified Al–Mn-Sc alloy. Mater Sci Eng A. 2022;859:1–7. doi:10.1016/j.msea.2022.144206
   Web of Science ®Google Scholar
• Jiang W, Deng Y, Guo X. Effect of heat treatment on microstructure and mechanical anisotropy of selective laser melted Al–Mn-Sc alloy. Mater Sci Eng A. 2023;887:1–11. doi:10.1016/j.msea.2023.145743
   Web of Science ®Google Scholar
• Yu WH, Sing SL, Chua CK, et al. Particle-reinforced metal matrix nanocomposites fabricated by selective laser melting: A state of the art review. Prog Mater Sci. 2019;104:330–379. doi:10.1016/j.pmatsci.2019.04.006
   Web of Science ®Google Scholar
• Kongthep J, Juijerm P. Kinetics of precipitation hardening phase in aluminium alloy AA 6110. Mater Sci Technol. 2014;30:1815–1819. doi:10.1179/1743284713Y.0000000488
   Web of Science ®Google Scholar
• Varschavsky A, Donoso E. A differential scanning calorimetrie study of precipitation in Cu-2Be. Thermochim Acta. 1995;266:257–275. doi:10.1016/0040-6031(95)02338-0
   Web of Science ®Google Scholar
• Fatmi M, Ghebouli B, Ghebouli MA, et al. The kinetics of precipitation in Al-2.4wt% Cu alloy by kissinger, ozawa, bosswel and matusita methods. Phys B. 2011;406:2277–2280. doi:10.1016/j.physb.2011.03.053
   Web of Science ®Google Scholar
• Vlach M, Stulikova I, Smola B, et al. Precipitation in cold-rolled Al–Sc–Zr and Al–Mn–Sc–Zr alloys prepared by powder metallurgy. Mater Charact. 2013;86:59–68. doi:10.1016/j.matchar.2013.09.010
   Web of Science ®Google Scholar
• Pan S, Qian F, Li C, et al. Synergistic strengthening by nano-sized α-Al(Mn,Fe)Si and Al3Zr dispersoids in a heat-resistant Al–Mn–Fe–Si–Zr alloy. Mater Sci Eng A. 2021;819:1–12. doi:10.1016/j.msea.2021.141460
   Web of Science ®Google Scholar
• Khan IN, Starink MJ, Yan JL. A model for precipitation kinetics and strengthening in Al–Cu–Mg alloys. Mater Sci Eng A. 2008;472:66–74. doi:10.1016/j.msea.2007.03.033
   Web of Science ®Google Scholar
• Djema O, Bouabdallah M, Badji R, et al. Isothermal and non-isothermal precipitation kinetics in Al–Mg–Si-(Ag) alloy. Mater Chem Phys. 2020;240:1–9. doi:10.1016/j.matchemphys.2019.122073
   Web of Science ®Google Scholar
• Boumerzoug Z, Fatmi M. Effect of heat treatments on discontinuous precipitation kinetics in Al-30 wt.% Zn alloy. Mater Charact. 2009;60:768–774. doi:10.1016/j.matchar.2008.12.015
   Web of Science ®Google Scholar
• Guía-Tello JC, Garay-Reyes CG, Ruiz-Esparza-Rodríguez MA, et al. Effect of plastic deformation on the precipitation reaction in 2024 alloys. Mater Chem Phys. 2021;271:1–5. doi:10.1016/j.matchemphys.2021.124927
   Web of Science ®Google Scholar
• Eivani AR, Taheri AK. Modeling age hardening kinetics of an Al–Mg–Si–Cu aluminum alloy. J Mater Process Technol. 2008;205:388–393. doi:10.1016/j.jmatprotec.2007.11.195
   Web of Science ®Google Scholar
• Jia Q, Rometsch P, Kürnsteiner P, et al. Selective laser melting of a high strength Al Mn Sc alloy: alloy design and strengthening mechanisms. Acta Mater. 2019;171:108–118. doi:10.1016/j.actamat.2019.04.014
   Web of Science ®Google Scholar
• Jo H, Fujikawa S. Kinetics of precipitation in Al-Sc alloys and low temperature solid solubility of scandium in aluminium studied by electrical resistivity measurements. Mater Sci Eng A. 1993;171:151–161. doi:10.1016/0921-5093(93)90401-Y
   Web of Science ®Google Scholar
• Vlach M, Stulikova I, Smola B, et al. Effect of cold rolling on precipitation processes in Al–Mn–Sc–Zr alloy. Mater Sci Eng A. 2012;548:27–32. doi:10.1016/j.msea.2012.03.063
   Web of Science ®Google Scholar
• Vlach M, Stulíková I, Smola B, et al. Phase transformations in isochronally annealed mould-cast and cold-rolled Al–Sc–Zr-based alloy. J Alloys Compd. 2010;492:143–148. doi:10.1016/j.jallcom.2009.11.126
   Web of Science ®Google Scholar
• Senkov ON, Shagiev MR, Senkova SV, et al. Precipitation of Al3(Sc,Zr) particles in an Al–Zn–Mg–Cu–Sc–Zr alloy during conventional solution heat treatment and its effect on tensile properties. Acta Mater. 2008;56:3723–3738. doi:10.1016/j.actamat.2008.04.005
   Web of Science ®Google Scholar
• Luiggi NJ. Analysis of thermoelectric power measurements in the study of precipitation kinetics in 3003 Al alloy. Metall Mater Trans B. 1997;28:149–159. doi:10.1007/s11663-997-0137-9
   Web of Science ®Google Scholar
• Wierszyłłowski I, Wieczorek S, Stankowiak A, et al. Kinetics of transformation during supersaturation and aging of the Al-4.7mass%Cu alloy: grain size, dilatometric, and differential thermal analysis studies. J Phase Equilibria Diffus. 2005;26:555–560. doi:10.1007/s11669-005-0050-3
   Web of Science ®Google Scholar
• Ghosh KS, Gao N. Determination of kinetic parameters from calorimetric study of solid state reactions in 7150 Al-Zn-Mg alloy. Trans Nonferrous Met Soc China. 2011;21:1199–1209. doi:10.1016/S1003-6326(11)60843-1
   Web of Science ®Google Scholar
• Feng D, Zhang X, Liu S, et al. Non-isothermal retrogression kinetics for grain boundary precipitate of 7A55 aluminum alloy. Trans Nonferrous Met Soc China. 2014;24:2122–2129. doi:10.1016/S1003-6326(14)63322-7
   Web of Science ®Google Scholar
• Zhao J, Wang B, Liu T, et al. Study of in situ formed quasicrystals in Al-Mn based alloys fabricated by SLM. J Alloys Compd. 2022;909:164847. doi:10.1016/j.jallcom.2022.164847
   Web of Science ®Google Scholar
• Gargarella P, Almeida A, Vilar R, et al. Microstructural characterization of a laser remelted coating of Al91Fe4Cr3Ti2 quasicrystalline alloy. Scr Mater. 2009;61:709–712. doi:10.1016/j.scriptamat.2009.06.010
   Web of Science ®Google Scholar
• Qian F, Jin S, Sha G, et al. Enhanced dispersoid precipitation and dispersion strengthening in an Al alloy by microalloying with Cd. Acta Mater. 2018;157:114–125. doi:10.1016/j.actamat.2018.07.001
   Web of Science ®Google Scholar
• Vo NQ, Dunand DC, Seidman DN. Atom probe tomographic study of a friction-stir-processed Al–Mg–Sc alloy. Acta Mater. 2012;60:7078–7089. doi:10.1016/j.actamat.2012.09.015
   Web of Science ®Google Scholar
• Zhang Z, Sun J, Wu J, et al. Influence of heat treatment on corrosion behavior of Al–Mn–Mg–Sc–Zr alloy produced by laser powder bed fusion. J Mater Res Technol. 2023;23:4734–4746. doi:10.1016/j.jmrt.2023.02.029
   Google Scholar
• Li R, Wang M, Li Z, et al. Developing a high-strength Al-Mg-Si-Sc-Zr alloy for selective laser melting: crack-inhibiting and multiple strengthening mechanisms. Acta Mater. 2020;193:83–98. doi:10.1016/j.actamat.2020.03.060
   Web of Science ®Google Scholar
• Fuller CB, Seidman DN, Dunand DC. Mechanical properties of Al(Sc,Zr) alloys at ambient and elevated temperatures. Acta Mater. 2003;51:4803–4814. doi:10.1016/S1359-6454(03)00320-3
   Web of Science ®Google Scholar
• Krug ME, Mao Z, Seidman DN, et al. Comparison between dislocation dynamics model predictions and experiments in precipitation-strengthened Al–Li–Sc alloys. Acta Mater. 2014;79:382–395. doi:10.1016/j.actamat.2014.06.038
   Web of Science ®Google Scholar