Laser powder bed fusion of 316L stainless steel and K220 copper multi-material

References

• DebRoy T, Wei HL, Zuback JS, et al. Additive manufacturing of metallic components – Process, structure and properties. Prog Mater Sci. 2018;92:112–224.
   Web of Science ®Google Scholar
• Dong Z, Han C, Zhao Y, et al. Role of heterogenous microstructure and deformation behavior in achieving superior strength-ductility synergy in zinc fabricated via laser powder bed fusion. Int J Extrem Manuf. 2024;6.
   Google Scholar
• Kang SG, Gainov R, Heußen D, et al. Green laser powder bed fusion based fabrication and rate-dependent mechanical properties of copper lattices. Mater Des. 2023;231:112023.
   Web of Science ®Google Scholar
• Sun Z, Tsai SP, Konijnenberg P, et al. A large-volume 3D EBSD study on additively manufactured 316L stainless steel. Scr Mater. 2024;238:115723.
   Web of Science ®Google Scholar
• Sun Z, Sun B, Soh V, et al. Laser powder bed fusion of crack-susceptible stainless maraging steel undergoing solid-state phase transformations. Acta Mater. 2024;263:119534.
   Web of Science ®Google Scholar
• Roscher M, Sun Z, Jägle EA. Designing Al alloys for laser powder bed fusion via laser surface melting: Microstructure and processability of 7034 and modified 2065. J Mater Process Technol. 2024;326:118334.
   Web of Science ®Google Scholar
• Sun Z, Soh V, Lee C, et al. Effects of carbon content on precipitate evolution and crack susceptibility in additively manufactured IN738LC. MSAM. 2024;3:2264.
   Google Scholar
• Wei S, Zhao Y, Zhang B, et al. Mesoscopic chemical heterogeneities in laser powder bed fused CoCrMo and Ni mixed powders and their effect on the mechanical properties. Mater Sci Eng A. 2023;888:145795.
   Web of Science ®Google Scholar
• Wei S, Zhao Y, Li S-H, et al. Laser powder bed fusion of a Cu-Ni-Al alloy using the compositional grading approach. Scr Mater. 2023;231:115441.
   Web of Science ®Google Scholar
• Zhang Y, Groden C, Nyberg E, et al. W7Ni3Fe-Ti6Al4V bimetallic layered structures via directed energy deposition. Virtual Phys. Prototyp. 2023;18:e2137048.
   Web of Science ®Google Scholar
• Groden C, Champagne V, Bose S, et al. Inconel 718-CoCrMo bimetallic structures through directed energy deposition-based additive manufacturing. Mater Sci Add Manuf. 2022;1:18.
   Google Scholar
• Sing SL, Huang S, Goh GD, et al. Emerging metallic systems for additive manufacturing: In-situ alloying and multi-metal processing in laser powder bed fusion. Prog Mater Sci. 2021;119:100795.
   Web of Science ®Google Scholar
• Nazir A, Gokcekaya O, Md Masum Billah K, et al. Multi-material additive manufacturing: A systematic review of design, properties, applications, challenges, and 3D printing of materials and cellular metamaterials. Mater Des. 2023;226:111661.
   Web of Science ®Google Scholar
• Wei C, Liu L, Gu Y, et al. Multi-material additive-manufacturing of tungsten - copper alloy bimetallic structure with a stainless-steel interlayer and associated bonding mechanisms. Addit Manuf. 2022;50:102574.
   Web of Science ®Google Scholar
• Schmidt A, Jensch F, Härtel S. Multi-material additive manufacturing-functionally graded materials by means of laser remelting during laser powder bed fusion. Front Mech Eng. 2023;18:49.
   Web of Science ®Google Scholar
• Wei C, Li L, Zhang X, et al. 3D printing of multiple metallic materials via modified selective laser melting. CIRP Ann. 2018;67:245–248.
   Web of Science ®Google Scholar
• Tan C, Chew Y, Bi G, et al. Additive manufacturing of steel–copper functionally graded material with ultrahigh bonding strength. J Mater Sci Technol 2021;72:217–222.
   Web of Science ®Google Scholar
• Zhang W, Zhang B, Xiao H, et al. A layer-dependent analytical model for printability assessment of additive manufacturing copper/steel multi-material components by directed energy deposition. Micromachines (Basel). 2021;12:1394.
   PubMed Web of Science ®Google Scholar
• Ramon J, Basu R, Vander Voort G, et al. A comprehensive study on solidification (hot) cracking in austenitic stainless steel welds from a microstructural approach. Int J Press Vessel Pip. 2021;194:104560.
   Web of Science ®Google Scholar
• Liu ZH, Zhang DQ, Sing SL, et al. Interfacial characterization of SLM parts in multi-material processing: Metallurgical diffusion between 316L stainless steel and C18400 copper alloy. Mater Charact. 2014;94:116–125.
   Web of Science ®Google Scholar
• Chen J, Yang Y, Song C, et al. Interfacial microstructure and mechanical properties of 316L /CuSn10 multi-material bimetallic structure fabricated by selective laser melting. Mater Sci Eng A. 2019;752:75–85.
   Web of Science ®Google Scholar
• Zhang X, Sun C, Pan T, et al. Additive manufacturing of copper – H13 tool steel bi-metallic structures via Ni-based multi-interlayer. Addit. Manuf. 2020;36:101474.
   Web of Science ®Google Scholar
• Zhang X, Pan T, Chen Y, et al. Additive manufacturing of copper-stainless steel hybrid components using laser-aided directed energy deposition. J Mater Sci Technol. 2021;80:100–116.
   Web of Science ®Google Scholar
• Zhang B, Zhang W, Xiao H, et al. QCr0.8 Cu alloy /S06 stainless steel bimetal structure via In718 multi-interlayer fabricated by laser powder hybrid additive manufacturing. J. Mater. Res. Technol. 2023;24:1034–1042.
   Google Scholar
• Rankouhi B, Jahani S, Pfefferkorn FE, et al. Compositional grading of a 316L-Cu multi-material part using machine learning for the determination of selective laser melting process parameters. Addit Manuf. 2021;38:101836.
   Web of Science ®Google Scholar
• Yadav S, Paul CP, Rai AK, et al. Elucidating laser directed energy deposition based additive manufacturing of copper-stainless steel functionally graded material: Processing and material behavior. J Manuf Process. 2023;92:107–123.
   Web of Science ®Google Scholar
• Schneck M, Horn M, Schindler M, et al. Capability of multi-material laser-based powder bed fusion—development and analysis of a prototype large bore engine component. Metals (Basel). 2022;12:44.
   Web of Science ®Google Scholar
• Meyer I, Oel M, Ehlers T, et al. Additive manufacturing of multi-material parts – Design guidelines for manufacturing of 316L/CuCrZr in laser powder bed fusion. Heliyon. 2023;9:e18301.
   PubMedGoogle Scholar
• Zhongji S, Leong S, Kai C, et al. Hopper for Powder Bed Fusion Additive Manufacturing. 2017.
   Google Scholar
• Tang C, Yao L, Du H. Computational framework for the simulation of multi material laser powder bed fusion. Int J Heat Mass Transf. 2022;191:122855.
   Web of Science ®Google Scholar
• Munitz A. Metastable liquid phase separation in tungsten inert gas and electron beam copper/stainless-steel welds. J Mater Sci. 1995;30:2901–2910.
   Web of Science ®Google Scholar
• Noecker FF, DuPont JN. Microstructural development and solidification cracking susceptibility of Cu deposits on steel: Part I. J Mater Sci. 2007;42:495–509.
   Web of Science ®Google Scholar
• Rinne J, Seffer O, Nothdurft S, et al. Investigations on the weld metal composition and associated weld metal cracking in laser beam welded steel copper dissimilar joints. J Mater Process Technol. 2021;296:117178.
   Web of Science ®Google Scholar
• Wang CP, Liu XJ, Shi RP, et al. Design and formation mechanism of self-organized core/shell structure composite powder in immiscible liquid system. Appl Phys Lett. 2007;91:1–4.
   Web of Science ®Google Scholar
• Rinne J, Nothdurft S, Hermsdorf J, et al. Investigations on laser welding of dissimilar joints of stainless steel and copper for hot crack prevention. J Laser Appl. 2021;33:1.
   Web of Science ®Google Scholar
• Garza LG, Van Tyne CJ. Surface hot-shortness of 1045 forging steel with residual copper. J Mater Process Technol. 2005;159:169–180.
   Web of Science ®Google Scholar
• Mercelis P, Kruth JP. Residual stresses in selective laser sintering and selective laser melting. Rapid Prototyp J. 2006;12:254–265.
   Web of Science ®Google Scholar
• Zhang Y, Yi Y, Huang S, et al. Influence of quenching cooling rate on residual stress and tensile properties of 2A14 aluminum alloy forgings. Mater Sci Eng A. 2016;674:658–665.
   Web of Science ®Google Scholar
• King WE, Barth HD, Castillo VM, et al. Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing. J Mater Process Technol. 2014;214:2915–2925.
   Web of Science ®Google Scholar
• Sun Z, Ma Y, Ponge D, et al. Thermodynamics-guided alloy and process design for additive manufacturing. Nat Commun. 2022;13.
   Web of Science ®Google Scholar
• Fang X, Ji S, Fan Z. Processing of immiscible metallic alloys by rheomixing process. Mater Sci Technol. 2001;17:837–842.
   Google Scholar
• Gan Z, Kafka OL, Parab N, et al. Universal scaling laws of keyhole stability and porosity in 3D printing of metals. Nat Commun. 2021;12.
   Web of Science ®Google Scholar
• Speidel A, Wadge MD, Gargalis L, et al. The interaction of volatile metal coatings during the laser powder bed fusion of copper. J Mater Process Technol. 2022;299:117332.
   Web of Science ®Google Scholar
• Gargalis L, Ye J, Strantza M, et al. Determining processing behaviour of pure Cu in laser powder bed fusion using direct micro-calorimetry. J Mater Process Technol. 2021;294:117130.
   Web of Science ®Google Scholar
• Sun Z, Tan X, Tor SB, et al. Selective laser melting of stainless steel 316L with low porosity and high build rates. Mater Des. 2016;104:197–204.
   Web of Science ®Google Scholar