Carbon nanotubes/α-ZrP sheets for high mechanical performance and flame-retarding polyamides using selective laser sintering

References

• Du H, et al. Experimental and theoretical study of the evolution of fluid-suspended graphene morphology driven by an applied electric field and the attainment of ultra-low percolation threshold in graphene-polymer nanocomposites. Compos Sci Technol. 2020;199:108315.
   Web of Science ®Google Scholar
• Li C, et al. Mechanical properties of polymer nanocomposites with randomly dispersed and cross-linked two-dimensional diamond. Compos Sci Technol. 2022;230:109722.
   Web of Science ®Google Scholar
• Wang W, Liu Y, Wang Q. Adjustable boron nitride segregated framework in epoxy resin for high performance thermal management and flame retardant applications. Compos Sci Technol. 2023;242:110161.
   Web of Science ®Google Scholar
• Tang Z-H, et al. Modeling the synergistic electrical percolation effect of carbon nanotube/graphene/polymer composites. Compos Sci Technol. 2022;225:109496.
   Web of Science ®Google Scholar
• Zhang X, et al. Revealing the apparent and local mechanical properties of heterogeneous lattice: a multi-scale study of functionally graded scaffold. Virtual Phys Prototyp. 2023;18(1):e2120406.
   Web of Science ®Google Scholar
• Xiao Z, et al. Recent progress on microstructure manipulation of aluminium alloys manufactured via laser powder bed fusion. Virtual Phys Prototyp. 2023;18(1):e2125880.
   Web of Science ®Google Scholar
• Al Noman A, Kumar BK, Dickens T. Field assisted additive manufacturing for polymers and metals: materials and methods. Virtual Phys Prototyp. 2023;18(1):e2256707.
   Web of Science ®Google Scholar
• Wang H, et al. Laser powder bed fusion of poly-ether-ether-ketone/bioactive glass composites: processability, mechanical properties, and bioactivity. Compos Sci Technol. 2023;231:109805.
   Web of Science ®Google Scholar
• Wang H, et al. Comparative evaluation of printability and compression properties of poly-ether-ether-ketone triply periodic minimal surface scaffolds fabricated by laser powder bed fusion. Addit Manuf. 2022;57:102961.
   Web of Science ®Google Scholar
• Wang H, et al. Isothermal crystallization behavior of poly-ether-ether-ketone/bioactive glass composites and its correlation with scaffold warpage in laser powder bed fusion process. Addit Manuf. 2023;78:103852.
   Web of Science ®Google Scholar
• Chen P, et al. Mechanical properties and microstructure characteristics of lattice-surfaced PEEK cage fabricated by high-temperature laser powder bed fusion. J Mater Sci Technol. 2022;125:105–117.
   Web of Science ®Google Scholar
• Ou J, et al. Additive manufacturing of flexible polymer-derived ceramic matrix composites. Virtual Phys Prototyp. 2023;18(1):e2150230.
   Web of Science ®Google Scholar
• Rosso S, et al. In-depth comparison of polyamide 12 parts manufactured by multi Jet fusion and selective laser sintering. Addit Manuf. 2020;36:101713.
   Web of Science ®Google Scholar
• Yuan S, et al. Electrical and thermal conductivities of MWCNT/polymer composites fabricated by selective laser sintering. Compos Part A Appl Sci Manuf. 2018;105:203–213.
   Web of Science ®Google Scholar
• Chatham CA, Long TE, Williams CB. A review of the process physics and material screening methods for polymer powder bed fusion additive manufacturing. Prog Polym Sci. 2019;93:68–95.
   Web of Science ®Google Scholar
• Cai C, et al. Comparative study on 3D printing of polyamide 12 by selective laser sintering and multi jet fusion. J Mater Process Technol. 2021;116882.
   Google Scholar
• Araby S, et al. Graphene platelets versus phosphorus compounds for elastomeric composites: flame retardancy, mechanical performance and mechanisms. Nanotechnology. 2019;30(38):385703.
   PubMed Web of Science ®Google Scholar
• Araby S, et al. Recent advances in carbon-based nanomaterials for flame retardant polymers and composites. Compos Part B: Eng. 2021;212:108675.
   Web of Science ®Google Scholar
• Han S, et al. Synergistic effect of graphene and carbon nanotube on lap shear strength and electrical conductivity of epoxy adhesives. J Appl Polym Sci. 2019;136(42):48056.
   Web of Science ®Google Scholar
• Zhu D, et al. Thermal and mechanical properties of polyamide 12/graphene nanoplatelets nanocomposites and parts fabricated by fused deposition modeling. J Appl Polym Sci. 2017;134(39):45332.
   Web of Science ®Google Scholar
• Vidakis N, et al. Multi-functional polyamide 12 (PA12)/ multiwall carbon nanotube 3D printed nanocomposites with enhanced mechanical and electrical properties. Adv Compos Mater. 2022;31(6):630–654.
   Web of Science ®Google Scholar
• Vidakis N, et al. Medical grade polyamide 12 silver nanoparticle filaments fabricated with in-situ reactive reduction melt-extrusion: rheological, thermomechanical, and bactericidal performance in MEX 3D printing. Appl Nanosci. 2024;14(1):69–88.
   Google Scholar
• Lupone F, et al. Innovative approach to the development of conductive hybrid composites for selective laser sintering. Compos Part A Appl Sci Manuf. 2021;147:106429.
   Web of Science ®Google Scholar
• Yuan Y, et al. The combination of Al2O3 and BN for enhancing the thermal conductivity of PA12 composites prepared by selective laser sintering. RSC Adv. 2021;11(4):1984–1991.
   PubMed Web of Science ®Google Scholar
• Han S, et al. Using renewable phosphate to decorate graphene nanoplatelets for flame-retarding, mechanically resilient epoxy nanocomposites. Prog Org Coat. 2023;182:107658.
   Web of Science ®Google Scholar
• Meng Q, et al. Preparation of high-performance bismuthene thermoelectric composites doped with graphene using UV-curing 3D printing technology. Polym Compos. 2024;45(9):8176–8186.
   Web of Science ®Google Scholar
• Lopes AC, Sampaio AM, Pontes AJ. Composite materials with MWCNT processed by selective laser sintering for electrostatic discharge applications. Polym Test. 2022;114:107711.
   Web of Science ®Google Scholar
• Azam MU, Schiffer A, Kumar S. Mechanical and piezoresistive behavior of selectively laser sintered MWCNT/UHMWPE nanocomposites. Compos Part A Appl Sci Manuf. 2023;173:107701.
   Web of Science ®Google Scholar
• Lopes ACF, Sampaio ÁM, Pontes AJ. Composite materials with MWCNT processed by selective laser sintering for electrostatic discharge applications. Polym Test. 2022;114:107711.
   Web of Science ®Google Scholar
• Aghajani S, et al. Additively manufactured composite lattices: A state-of-the-art review on fabrications, architectures, constituent materials, mechanical properties, and future directions. Thin-Walled Struct. 2024;197:111539.
   Web of Science ®Google Scholar
• Systemes D. Abaqus 6.12 Online documentation. Accessed on 26 April 2024.
   Google Scholar
• Han S, et al. Tackling smoke toxicity and fire hazards of thermoplastic polyurethane by mechanochemical combination of Cu₂O nanoparticles and zirconium phosphate nanosheets. Polym Degrad Stab. 2023;212:110350.
   Web of Science ®Google Scholar
• Han, S., et al., Supramolecular-Wrapped α-zirconium phosphate nanohybrid for fire safety and reduced toxic emissions of thermoplastic polyurethane. ACS Appl Polym Mater, 2024;6:1376–1388.
   Web of Science ®Google Scholar
• Han S, et al. Synergetic effect of alpha-ZrP nanosheets and nitrogen-based flame retardants on thermoplastic polyurethane. ACS Appl Mater Interfaces. 2023;15(13):17054–17069.
   PubMed Web of Science ®Google Scholar
• Dadbakhsh S, et al. Effect of powder size and shape on the SLS processability and mechanical properties of a TPU elastomer. Phys Procedia. 2016;83:971–980.
   Google Scholar
• Schmid M, Amado A, Wegener K. Polymer powders for selective laser sintering (SLS). AIP conference proceedings. 2015. AIP Publishing
   Google Scholar
• Chávez-Medellín R, Prado LASdA, Schulte K. Polyamide-12/Functionalized carbon nanofiber composites: evaluation of thermal and mechanical properties. Macromol Mater Eng. 2010;295(4):397–405.
   Web of Science ®Google Scholar
• McNally T, et al. Polyamide-12 layered silicate nanocomposites by melt blending. Polymer. 2003;44(9):2761–2772.
   Web of Science ®Google Scholar
• Shi Y, et al. Effect of the properties of the polymer materials on the quality of selective laser sintering parts. Proc Inst Mech Eng. 2004;218(3):247–252.
   Google Scholar
• Pham DT, Dotchev KD, Yusoff WAY. Deterioration of polyamide powder properties in the laser sintering process. Proc Inst Mech Eng Part C. 2008;222(11):2163–2176.
   Web of Science ®Google Scholar
• Meng Q, et al. Highly ductile and mechanically strong Al-alloy/boron nitride nanosheet composites manufactured by laser additive manufacturing. J Manuf Process. 2023;89:384–396.
   Web of Science ®Google Scholar
• Abdelsalam A, et al. Effect of filler surface treatment on the physico-mechanical properties of filler/styrene-butadiene rubber nanocomposites. J Thermoplast Compos Mater: 08927057241244708. doi:10.1177/0892705724124470.
   Web of Science ®Google Scholar
• Li W, Xin Z. Flexural fatigue life prediction of a tooth V-belt made of fiber reinforced rubber. Int J Fatigue. 2018;111:269–277.
   Web of Science ®Google Scholar
• Abubakar I, Myler P, Zhou E. Constitutive modelling of elastomeric seal material under compressive loading. 2016.
   Google Scholar