A semi-analytical approach to wire arc additive manufacturing simulation for deposition sequence optimisation

References

• Wu B, Pan Z, Ding D, et al. A review of the wire arc additive manufacturing of metals: properties, defects and quality improvement. J Manuf Process. 2018;35:127–139. doi:10.1016/j.jmapro.2018.08.001
   Web of Science ®Google Scholar
• Xia C, Pan Z, Polden J, et al. A review on wire arc additive manufacturing: monitoring, control and a framework of automated system. J Manuf Syst. 2020;57:31–45. doi:10.1016/j.jmsy.2020.08.008
   Web of Science ®Google Scholar
• Cunningham CR, Flynn JM, Shokrani A, et al. Invited review article: strategies and processes for high quality wire arc additive manufacturing. Addit Manuf. 2018;22:672–686. doi:10.1016/j.addma.2018.06.020
   Web of Science ®Google Scholar
• Williams SW, Martina F, Addison AC, et al. Wire + arc additive manufacturing. Mater Sci Technol. 2016;32:641–647. doi:10.1179/1743284715Y.0000000073
   Web of Science ®Google Scholar
• Ma G, Zhao G, Li Z, et al. Optimization strategies for robotic additive and subtractive manufacturing of large and high thin-walled aluminum structures. Int J Adv Manuf Technol. 2019;101:1275–1292. doi:10.1007/s00170-018-3009-3
   Web of Science ®Google Scholar
• Gu J, Bai J, Ding J, et al. Design and cracking susceptibility of additively manufactured Al-Cu-Mg alloys with tandem wires and pulsed arc. J Mater Process Technol. 2018;262:210–220. doi:10.1016/j.jmatprotec.2018.06.030
   Web of Science ®Google Scholar
• Seow CE, Zhang J, Coules HE, et al. Effect of crack-like defects on the fracture behaviour of wire + arc additively manufactured nickel-base alloy 718. Addit Manuf. 2020;36:101578. doi:10.1016/j.addma.2020.101578
   Web of Science ®Google Scholar
• Derekar K, Lawrence J, Melton G, et al. Influence of interpass temperature on wire arc additive manufacturing (WAAM) of aluminium alloy components. MATEC Web Conf. 2019;269:05001. doi:10.1051/matecconf/201926905001
   Google Scholar
• Ding D, Pan Z, Cuiuri D, et al. Wire-feed additive manufacturing of metal components: technologies, developments and future interests. Int J Adv Manuf Technol. 2015;81:465–481. doi:10.1007/s00170-015-7077-3
   Web of Science ®Google Scholar
• Kozamernik N, Bračun D, Klobčar D. WAAM system with interpass temperature control and forced cooling for near-net-shape printing of small metal components. Int J Adv Manuf Technol. 2020;110:1955–1968. doi:10.1007/s00170-020-05958-8
   Web of Science ®Google Scholar
• Zhao XF, Wimmer A, Zaeh MF. Experimental and simulative investigation of welding sequences on thermally induced distortions in wire arc additive manufacturing. RPJ. 2023;29:53–63. doi:10.1108/RPJ-07-2022-0244
   Google Scholar
• Venturini G, Montevecchi F, Scippa A, et al. Optimization of WAAM deposition patterns for T-crossing features. Proc CIRP. 2016;55:95–100. doi:10.1016/j.procir.2016.08.043
   Google Scholar
• Li F, Chen S, Shi J, et al. Thermoelectric cooling-aided bead geometry regulation in wire and Arc-based additive manufacturing of thin-walled structures. Appl Sci. 2018;8:207. doi:10.3390/app8020207
   Google Scholar
• Baier D, Wolf F, Weckenmann T, et al. Thermal process monitoring and control for a near-net-shape wire and arc additive manufacturing. Prod Eng Res Devel. 2022;16:811–822. doi:10.1007/s11740-022-01138-7
   Google Scholar
• Wu B, Pan Z, Ding D, et al. Effects of heat accumulation on microstructure and mechanical properties of Ti6Al4 V alloy deposited by wire arc additive manufacturing. Addit Manuf. 2018;23:151–160. doi:10.1016/j.addma.2018.08.004
   Web of Science ®Google Scholar
• Li X, Lin J, Xia Z, et al. Influence of deposition patterns on distortion of H13 steel by wire-arc additive manufacturing. Metals (Basel). 2021;11:485. doi:10.3390/met11030485
   Web of Science ®Google Scholar
• Israr R, Buhl JE, Elze L, et al. Simulation of different path strategies for wire-arc additive manufacturing with Lagrangian finite element methods. LS-DYNA forum, Bamberg, Germany. 2018.
   Google Scholar
• Zhao XF, Zapata A, Bernauer C, et al. Simulation of wire arc additive manufacturing in the reinforcement of a half-cylinder shell geometry. Materials (Basel). 2023;16; doi:10.3390/ma16134568
   Web of Science ®Google Scholar
• Montevecchi F, Venturini G, Scippa A, et al. Finite element modelling of wire-arc-additive-manufacturing process. Proc CIRP. 2016;55:109–114. doi:10.1016/j.procir.2016.08.024
   Google Scholar
• Bähr M, Buhl J, Radow G, et al. Fügenschuh, stable honeycomb structures and temperature based trajectory optimization for wire-arc additive manufacturing. Optim Eng. 2021;22:913–974. doi:10.1007/s11081-020-09552-5
   Web of Science ®Google Scholar
• Kadivar MH, Jafarpur K, Baradaran GH. Optimizing welding sequence with genetic algorithm. Comput Mech. 2000;26:514–519. doi:10.1007/s004660000195
   Web of Science ®Google Scholar
• Viola R, Poulhaon F, Balandraud X, et al. Manufacturing time estimator based on kinematic and thermal considerations: application to WAAM process. Int J Adv Manuf Technol. 2024;131:689–699. doi:10.1007/s00170-023-11658-w
   Web of Science ®Google Scholar
• Diestel R. Graph theory. Fifth edition Berlin, Heidelberg: Springer; 2017. doi:10.1007/978-3-662-53622-3
   Google Scholar
• Bondy JA, Murty USR. Graph theory with applications. New York (NY): North Holland; 1985, 1976. doi:10.1007/978-1-84628-970-5
   Google Scholar
• Zapata A, Benda A, Spreitler M, et al. A model-based approach to reduce kinematics-related overfill in robot-guided laser directed energy deposition. CIRP J Manuf Sci Technol. 2023;45:200–209. doi:10.1016/j.cirpj.2023.06.014
   Web of Science ®Google Scholar
• Radaj D. Heat effects of welding: temperature field, residual stress, distortion. Berlin, Heidelberg: Springer Berlin Heidelberg; 1992. doi:10.1007/978-3-642-48640-1
   Google Scholar
• Zapata A, Zhao XF, Li S, et al. Three-dimensional annular heat source for the thermal simulation of coaxial laser metal deposition with wire. J Laser Appl. 2023;35:012020. doi:10.2351/7.0000813
   Web of Science ®Google Scholar
• The European Union. Design of Aluminium Structures—Part 1–2: Structural Fire Design, Brussels, 2007.
   Google Scholar
• Goldak J, Chakravarti A, Bibby M. A new finite element model for welding heat sources. Metall Trans B. 1984;15:299–305. doi:10.1007/BF02667333
   Web of Science ®Google Scholar
• Lindgren L-E. Computational welding mechanics: thermomechanical and microstructural simulations, first. Cambridge, Boca Raton: Woodhead Publishing; CRC Press; 2007.
   Google Scholar
• Ahmad SN, Manurung YHP, Mat MF, et al. Fem simulation procedure for distortion and residual stress analysis of wire arc additive manufacturing. IOP Conf Ser: Mater Sci Eng. 2020;834:012083. doi:10.1088/1757-899X/834/1/012083
   Google Scholar
• Ding D, Zhang S, Lu Q, et al. The well-distributed volumetric heat source model for numerical simulation of wire arc additive manufacturing process. Mater Today Commun. 2021;27:102430. doi:10.1016/j.mtcomm.2021.102430
   Web of Science ®Google Scholar
• Touloukian YS, Dewitt DP, Touloukian YS (Eds.). Thermophysical properties of matter: The TPRC data series; a comprehensive compilation of data. New York (NY): IFI/Plenum; 1970.
   Google Scholar