Modelling of adequate pretwist for obtaining straight timber

References

• Anon . ( 1999 ). Wood handbook—Wood as an engineering material . Forest Products Laboratory, US Department of Agriculture , Madison, WI .
   Google Scholar
• Anon . ( 2004 ). ABAQUS user's manual . Rhode Island : ABAQUS . www.abaqus.com
   Google Scholar
• Clouston , P. L. and Lam , F. 2001 . Computational modelling of strand-based composites . Journal of Engineering Mechanics , 127 : 844 – 851 .
   Web of Science ®Google Scholar
• Danborg , F. 1994 . Drying properties and visual grading of juvenile wood from fast grown Picea abies and Picea sitchensis . Scandinavian Journal of Forest Research , 9 : 91 – 98 .
   Web of Science ®Google Scholar
• Danvind , J. and Ekevad , M. 2006 . Local water vapour diffusion coefficient when drying Norway spruce sapwood . Journal of Wood Science , 52 : 195 – 201 .
   Web of Science ®Google Scholar
• DeTeresa , S. J. and Larsen , G. J. 2003 . Reduction of the number of independent parameters for the Tsai-Wu tensor polynomial theory of strength for composite materials . Journal of Composite Materials , 37 : 1769 – 1785 .
   Web of Science ®Google Scholar
• Eastin , I. L. , Shook , S. R. and Fleishman , S. J. 2001 . Material substitution in the US residential construction industry, 1994 versus 1998 . Forest Products Journal , 51 ( 8 ) : 30 – 37 .
   Google Scholar
• Ekevad , M. 2005 . Twist of wood studs: Dependence on spiral grain gradient . Journal of Wood Science , 51 : 455 – 461 .
   Web of Science ®Google Scholar
• Hammoum , F. and Audebert , P. 1999 . Modeling and simulation of (visco)-plastic behaviour of wood under moisture change . Mechanics Research Communications , 26 : 203 – 208 .
   Web of Science ®Google Scholar
• Johansson , M. and Kliger , R. 2002 . Influence of material characteristics on warp in Norway spruce studs . Wood and Fiber Science , 34 : 325 – 336 .
   Web of Science ®Google Scholar
• Johansson , G. , Kliger , R. and Perstorper , M. 1994 . Quality of structural timber-product specification system required by end-users . Holz als Roh- und Werkstoff , 52 : 42 – 48 .
   Google Scholar
• Johansson , M. , Perstorper , M. , Kliger , R. and Johansson , G. 2001 . Distortion of Norway spruce timber Part 2. Modelling twist . Holz als Roh- und Werkstoff , 59 : 155 – 162 .
   Google Scholar
• Lubliner , J. 1990 . Plasticity theory , New York : Macmillan .
   Google Scholar
• Mackenzie-Helnwein , P. , Eberhardsteiner , J. and Mang , A. 2005 . Rate-independent mechanical behaviour of biaxially stressed wood: Experimental observations and constitutive modeling as an orthotropic two-surface elasto-plastic material . Holzforschung , 59 : 311 – 321 .
   Web of Science ®Google Scholar
• Mårtensson , A. and Svensson , S. 1997 . Stress–strain relationship of drying wood. Part 1: Development of a constitutive model . Holzforschung , 51 : 472 – 478 .
   Web of Science ®Google Scholar
• Northway , R. ( 1981 ). Restraint forces needed to hold radiata pine heart-in studs straight during high temperature drying . 20th Forest Products Research Conference , CSIRO , Melbourne , November 1981 .
   Google Scholar
• Nyström , J. ( 2002 ). Automatic measurement of compression wood and spiral grain for the prediction of distortion in sawn wood products . Doctoral thesis 2002 : 37 , Luleå University of Technology .
   Google Scholar
• Nyström , J. & Grundberg , S. ( 2002 ). Real-time, noncontact measurement of spiral grain on debarked sawlogs . Paper presented at 13th International Symposium on Nondestructive Testing of Wood , University of California, Berkeley Campus, CA, USA , 19–21 August 2002 . (Also in Doctoral thesis 2002:37, Luleå University of Technology.)
   Google Scholar
• Öhman , M. ( 2001 ). The measurement of compression wood and other features and the prediction of their impact on wood products . Doctoral thesis 2001 : 42 , Luleå University of Technology .
   Google Scholar
• Ormarsson , S. ( 1999 ). Numerical analysis of moisture-related distortions in sawn timber . Doctoral thesis 1531 , Chalmers University of Technology .
   Google Scholar
• Pang , S. 1996 . External heat and mass transfer coefficients for kiln drying of timber . Drying Technology , 14 : 859 – 871 .
   Web of Science ®Google Scholar
• Perstorper , M. ( 1994 ) Quality of structural timber. End-user requirements and performance control . Chalmers Tekniska Hogskola , Doktorsavhandlingar , n 998 .
   Google Scholar
• Salin , J.-G. ( 2005 ). Drying of boards, prone to twist, in a pre-twisted position . Proceedings of the 9th International IUFRO Wood Drying Conference , Nanjing , China , 21–26 August 2005 (pp. 253 – 258 ).
   Google Scholar
• Salin , J.-G. , Esping , B. & Hajek , B. ( 2005 ). Drying and re-conditioning of pre-twisted boards. Laboratory and industrial tests . Report on WP 2.4 and WP 2.7 of the STRAIGHT project (SP Report 2005:14) Swedish National Testing and Research Institute, Borås, Sweden.
   Google Scholar
• Säll , H. ( 2002 ). Spiral grain in Norway spruce . Doctoral thesis 22/2002 , Växjö University .
   Google Scholar
• Siimes , F. E. ( 1967 ). The effect of specific gravity, moisture content, temperature and heating time on the tension and compression strength and elasticity properties perpendicular to the grain of Finnish pine, spruce and birch wood and the significance of these factors on the checking of timber at kiln drying (Publication 84) . Helsinki : State Institute for Technical Research .
   Google Scholar
• Skatter , S. and Kucera , B. 1998 . The cause of the prevalent directions of the spiral grain patterns in conifers . Trees: Structure and Function , 12 : 265 – 273 .
   Web of Science ®Google Scholar
• Stevens , W. C. and Johnston , D. D. 1960 . Distortion caused by spiralled grain . Timber Technology , 68 : 217 – 218 .
   Google Scholar
• Thomas , H. R. 1983 . Numerical analysis of drying induced stresses in timber: An orthotropic model . Mechanics of Materials , 2 : 249 – 263 .
   Web of Science ®Google Scholar
• Tsai , S. W. and Wu , E. M. 1971 . A general theory of strength for anisotropic materials . Journal of Composite Materials , 5 : 58 – 80 .
   Web of Science ®Google Scholar
• Visser , J. J. and Vermaas , H. F. 1988 . Steaming under restraint to remove twist in previously dried Pinus radiata boards . Holzforschung , 42 : 59 – 63 .
   Web of Science ®Google Scholar
• Wiberg , P. & Morén , T. ( 1999 ). New information on sapwood drying: CT-scanning profiles of moisture content during drying . Proceedings of the 1st Wood Drying Workshop in COST ACTION E15 , Edinburgh .
   Google Scholar
• Woxblom , L. ( 1999 ). Warp of sawn timber of Norway spruce in relation to end-user requirements . Doctoral thesis , Swedish University of Agricultural Sciences .
   Google Scholar