Tool wear for lesser known tropical wood species

References

• Ali , A. , Uetimane , E. , Lhate , I. and Terziev , N. 2008 . Anatomical characteristics, properties and use of traditionally used and lesser-known wood species from Mozambique: A literature review . Wood Science and Technology , 42 : 453 – 472 .
   Web of Science ®Google Scholar
• Anon . 2008 . User guide and tutorial . UMETRICS AB, USA .
   Google Scholar
• Darmawan , W. , Rahayu , I. , Tanaka , C. and Marchal , R. 2006 . Chemical and mechanical wearing of high speed steel and tungsten carbide tools by tropical woods . Journal of Tropical Forest Science , 18 : 255 – 260 .
   Web of Science ®Google Scholar
• DNTF 2007 . Relatório estatísco annual 2006 . Maputo, , Mozambique : Direcção Nacional de Terras e Florestas-MINAG .
   Google Scholar
• Gottwald , H. 1973 . Die Bedeutung der Holzanatomie fur die Voraussage von Holzeigenschaften . Holzforschung , 27 ( 2 ) : 48 – 51 .
   Google Scholar
• Kirbach , E. and Chow , E. 1976 . Chemical wear of tungsten carbide cutting tools by western red cedar . Forest Products Journal , 26 ( 3 ) : 44 – 48 .
   Web of Science ®Google Scholar
• Klamecki , B. 1979 . A review of wood cutting tool wear literature . Holz als Roh- und Werkstoff , 37 : 265 – 276 .
   Google Scholar
• Lhate , I. , Cuvilas , C. , Terziev , N. and Jirjis , R. 2010 . Chemical composition of traditionally and lesser used wood species from Mozambique . Wood Material Science & Engineering , 5 : 143 – 150 .
   Google Scholar
• Lindgren , O. , Davis , J. and Shadbolt , P. 1992 . Non-destructive wood density distribution measurements using computed tomography . Holz als Roh- und Werkstoff , 50 : 295 – 299 .
   Google Scholar
• McKenzie , W. and Cowling , R. 1971 . A factorial experiment in transverse-plane (90/90) cutting of wood. Part I. Cutting force and edge wear . Wood Science , 3 : 204 – 213 .
   Google Scholar
• McKenzie , W. and Karpovich , H. 1968 . The frictional behavior of wood . Wood Science and Technology , 2 : 138 – 152 .
   Google Scholar
• Noack , D. & Frühwald , A. 1977 . The influence of wood properties on wood processing . IUFRO—Joint Meeting of the Subject Group S 5.04 and the Project Group 5.01 , Merida, Venezuela .
   Google Scholar
• Okai , R. , Tanaka , C. and Iwasaki , Y. 2005 . Influence of mechanical properties and mineral salts in wood species on tool wear of high-speed steels and satellite-tipped tools—Consideration of tool wear of the newly developed tip-inserted band saw . Holz als Roh- und Werkstoff , 64 : 45 – 52 .
   Google Scholar
• Porankiewicz , B. & Grönlund , A. 1991 . Tool wear-influencing factors . In Proceedings of the 10th International Wood Machining Seminar , University of California, Richmond, CA, USA , October 21–23 , pp. 220 – 229 .
   Google Scholar
• Porankiewicz , B. , Iskra , P. , Sandak , J. and Tanaka , C. 2006 . High-speed steel tool wear during wood cutting in the presence of high-temperature corrosion and mineral contamination . Wood Science and Technology , 40 : 673 – 682 .
   Web of Science ®Google Scholar
• Porankiewicz , B. , Sandak , J. and Tanaka , C. 2005 . Factors influencing steel tool wear when milling wood . Wood Science and Technology , 39 : 225 – 234 .
   Web of Science ®Google Scholar
• Rowell , R. 1984 . The chemistry of solid wood , Washington, DC : American Chemical Society .
   Google Scholar
• Sheikh-Ahmad , J. & McKenzie , W. 1997 . Measurement of tool wear and dulling in the machining of particleboard . In Proceedings of the 13th International Wood Machining Seminar , Vancouver, Canada , June 17–20 pp. 659 – 670 .
   Google Scholar
• Siklienka , M. and Mi(ura , L. 2008 . Influence of saw blade clearance over the workpiece on tool-wear . Drvna Industrija , 59 : 151 – 155 .
   Google Scholar
• Torelli , N. and (ufar , K. 1995 . Mexican tropical hardwoods. Comparative study of ash and silica content . Holz als Roh- und Werkstoff , 53 : 61 – 62 .
   Google Scholar