References
- Kirbach , E. and Chow , E. 1976 . Chemical wear of tungsten carbide cutting tools by western red cedar . Forest Products Journal , 26 ( 3 ) : 44 – 48 .
- Klamecki , B. 1979 . A review of wood cutting tool wear literature . Holz Roh Werkst , 37 : 265 – 276 .
- McKenzie , W. and Cowling , R. 1971 . A factorial experiment in transverse-plane (90/90) cutting of wood. Part I. Cutting force and edge wear . Wood Science , 3 : 204 – 213 .
- McKenzie , W. and Karpovich , H. 1968 . The frictional behavior of wood . Wood Science and Technology , 2 : 138 – 152 .
- Okai , R. , Tanaka , C. and Iwasaki , Y. 2005 . Influence of mechanical properties and mineral salts in wood species on tool wear of high-speed steels and satellite-tipped tools – Consideration of tool wear of the newly developed tip-inserted band saw . Holz Roh Werkst , 64 : 45 – 52 .
- Porankiewicz , B. and Grönlund , A. 1991 . Tool wear-influencing factors . In Proceedings of the 10th International Wood Machining Seminar . 21–23 October, University of California, Berkeley, CA. Berkeley, CA: University of California , 220 – 229 .
- Porankiewicz , B. , Iskra , P. , Sandak , J. and Tanaka , C. 2006 . High-speed steel tool wear during wood cutting in the presence of high-temperature corrosion and mineral contamination . Wood Science and Technology , 40 : 673 – 682 .
- Porankiewicz , B. , Sandak , J. and Tanaka , C. 2005 . Factors influencing steel tool wear when milling wood . Wood Science and Technology , 39 : 225 – 234 .
- Sheikh-Ahmad , J. McKenzie , W. 1997 . Measurement of tool wear and dulling in the Machining of particleboard . In Proceedings of the 13th International Wood Machining Seminar . 17–20 June, Vancouver, Canada. Vancouver: Forintek , 659 – 670 .