Product quality deficiencies in the prefabrication industry for single-family houses

References

• Andersson, L.-E., Engström, D. and Widfeldt, M. (2007) Production lines for custom-ordered house manufacturing. In M. Sharp (ed.) Proceedings of the 1st International Conference: The Transformation of the Industry – Open Building Manufacturing, 25–26 April, Rotterdam, Netherlands.
   Google Scholar
• Bergman, B. and Klefsjö, B. (2007) Kvalitet från behov till användning [Quality from the need to use] (Studentlitteratur: Lund). ( In Swedish.)
   Google Scholar
• Bergman, L., Fransson, B. and Thörnqvist, T. (1997) Rätt kvalitet och dimension hos byggnadsvirke [Proper quality and dimensions of building timber] (Växjö: Högskolan i). Report No. 5. ( In Swedish with an English abstract)
   Google Scholar
• Bowyer, J., Shmulsky, R. and Haygreen, J. G. (2007) Forest Products and Wood Science: An Introduction ( 5th ed.) (Ames, IA: Blackwell Publishing).
   Google Scholar
• Bryman, A. and Bell, E. (2011) Business Research Methods ( 3rd ed.) (New York: Oxford University Press).
   Google Scholar
• Eliasson, L. (2010) Slutrapport DISK “Framtidens trähusfabrik” [Final report DISK “Future Timber House Factory”] (Växjö: Linnéuniversitetet). ( In Swedish)
   Google Scholar
• Eliasson, L. (2011). Ställ krav på virket – Rätt virke för produktion i framtidens trähusfabrik [Make Demands on Timber – The Right Timber for Future Wood House Factory] Licentiate thesis. (Växjö: Linnaeus University). ( In Swedish with English abstract.)
   Google Scholar
• Eliasson, L and Gustafsson, Å. (2013) Quality deficiencies regarding softwood in the pre-fabrication industry for single-family timber houses. Wood Material Science and Engineering, 8:1, 53–63.
   Google Scholar
• Eliasson, L. and Kifetew, G. (2010) Volume yield and profit in the production of clear finger-jointed Scots pine (Pinus sylvestris L.) boards. European Journal of Timber and Timber Products, 68, 189–195.
   Web of Science ®Google Scholar
• Eliasson, L. and Sandberg, D. (2013) A Case-study of Single-family Timber Housing in Sweden and Its Wood Material Processing Cost. Submitted paper.
   Google Scholar
• Flynn, B. B, Sakakibara, S., Schroeder, R. G., Bates, K. A. and Flynn, E. J. (1990) Empirical research method in operations management. Journal of Operations Management, 9, 250–284. doi:10.1016/0272-6963(90)90098-X
   Google Scholar
• Gustafsson, Å. (2006) Customers’ Logistics Service Requirements and Logistics Strategies in the Swedish Sawmill Industry. Doctoral thesis (Växjö: Växjö universitet).
   Google Scholar
• Gustafsson, Å. and Rask, L.-O. (2010) Distribution channel structure and integration. Contingency variables in the sawmill industry. Proceedings NOFOMA Conference 2010, Kolding, Denmark.
   Google Scholar
• Hair, J., Andersson, R., Tatham, R. and Black, W. (1998) Multivariate Data Analysis (Upper Saddle River, NJ: Prentice Hall).
   Google Scholar
• Höök, M. and Stehn, L. (2008) Lean principles in industrialized housing production: The need for a cultural change. Lean Construction Journal, 4, 20–33.
   Google Scholar
• Johansson, G., Kliger, R. and Perstorper, M. (1990) Kvalitetskrav på byggnadsvirke [Quality Demand on Construction Timber]. (Byggforskningsrådet, Stockholm: Rapport nr 105). ( In Swedish)
   Google Scholar
• Johansson, G., Kliger, R. & Perstorper, M. (1993) Inköpsregler för byggnadsvirke. Byggbranschens kvalitetskrav [Purchasing guidelines for building timber. Construction industry quality standards]. Byggforsknings-rådet, Stockholm, Rapport 20:1993. (In Swedish)
   Google Scholar
• Johansson, M., Malmgren, L. & Persson, S. (2007) ICT support for industrial production of houses – the Swedish case. In: Proceedings CIB W78 Bringing ITC knowledge to work, Maribor, June 2007.
   Google Scholar
• Jozsa, L. A., and Middleton, G. R. (1994) A Discussion of Wood Quality Attributes and Their Practical Implications. Special Pub. No. SP-34. (Vancouver: Forintek Canda Corp), p. 42.
   Google Scholar
• Juran, J. M. (1990) Juran's Quality Handbook (New York: McGraw-Hill).
   Google Scholar
• Juran, J. M. and Gryna, F. M. (1993) Quality Planning and Analysis: From Product Development Through Use (New York: McGraw-Hill).
   Google Scholar
• Kliger, R., Johansson, G., Perstorper, M. and Engström, D. (1994) Formulation of Requirements for the Quality of Wood Products Used by the Construction Industry. Chalmers University of Technology, Department of Structural Engineering. Report No. S 94:4.
   Google Scholar
• Körner, S. and Wahlgren, L. (2005) Statistiska metoder [Statistical methods] (Lund: Studentlitteratur). ( In Swedish)
   Google Scholar
• Kumar, K., and Shah, R. Fitzroy, P. T. (2010) A review of quality cost surveys. Total Quality Management, 9:6, 479–486. doi:10.1080/0954412988406
   Google Scholar
• Nahmens, I. and Mullens, M. (2009) The impact of product choice on lean homebuilding. Construction Innovation, 9, 84–100.
   Google Scholar
• Nord, T. (2005) Structure and Developments in the Solid Wood Chain. Dominant Saw Milling Strategies and Industrialized Housing Licentiate thesis (Luleå: University of Technology).
   Google Scholar
• Ross, J. E. and Wegman, D. E. (1990) Quality management and the role of the accountant. Industrial Management, 32, 21–23.
   Google Scholar
• Schmidt, L. (2009) Industrialisering av trehusproduksjonen - en kunnskapsoversikt. (Industrialization of timber production - a knowledge overview.). NIBR, Norwegian Institute for Urban and Regional Research, Report No. 2009:18. (In Norwegian with English abstract)
   Google Scholar
• SOU. (2000) Från byggsekt till byggsektor. (From a sect of construction to construction sector.) Byggkostnadsdelegationens betänkande, statens offentliga utredningar 2000:44, Ministry of Enterprise, Energy and Communications, Government Offices of Sweden. ( In Swedish)
   Google Scholar
• Stendahl, M. and Eliasson, L. (2013) Integrated production of semi-finished components in Sawmills, Part II: Management of internal operations. Wood Material Science and Engineering, 8:1, 53–63.
   Google Scholar
• Stendahl, M., McCluskey, D. and Eliasson, L. (2013) Quality cost measurement under activity-based costing. Integrated Production of Semi-finished Components in Sawmills, Part I: External Interactions. Wood Material Science and Engineering. Available at: http://dx.doi.org/10.1080/17480272.2013.834965
   Google Scholar
• Tsai, W.-H. (1998) Quality cost measurement under activity-based costing. International Journal of Quality & Reliability Management, 15, 7.
   Google Scholar
• Van Weele, A. J. (2009) Purchasing and Supply Chain Management: South-Western (Andover: Cengage Learning).
   Google Scholar
• Womack, J. P., Jones, D. T. and Roos, D. (1990) The Machine That Changed the World: The Story of Lean Production. MIT International Motor Vehicle Program (New York: Harper Collins Publishers).
   Google Scholar