Optimization potential for perception-oriented appearance classification by simulated sawing of computed tomography-scanned logs of Norway spruce

References

• Anonymous (1997) Nordic Timber: Grading Rules for pine (Pinus sylvestris) and Spruce (Picea abies) Sawn Timber: Commercial Grading based on Evaluation of the Four Sides of Sawn Timber (Umeå: Föreningen Svenska Sågverksmän).
   Google Scholar
• Anonymous (2002) Sawn Timber—Appearance Grading of Softwoods — Part 1: European Spruces, Firs, Pines, Douglas Fir and Larches (including amendment 1:2002). EN 1611-1:1999 + A1:2002.
   Google Scholar
• Anonymous (2008) Qualitative Classification of Softwood Round Timber — Part 1: Spruces and Firs. EN 1927-1:2008.
   Google Scholar
• Berglund, A., Broman, O., Grönlund, A. and Fredriksson, M. (2013) Improved log rotation using information from a computed tomography scanner. Computers and Electronics in Agriculture, 90, 152–158. 10.1016/j.compag.2012.09.012
   Web of Science ®Google Scholar
• Berglund, A., Johansson, E. and Skog, J. (2014) Value optimized log rotation for strength graded boards using computed tomography. European Journal of Wood and Wood Products, 72, 635–642. 10.1007/s00107-014-0822-8
   Web of Science ®Google Scholar
• Breinig, L., Leonhart, R., Broman, O., Manuel, A., Brüchert, F. and Becker, G. (2014) Classification of wood surfaces according to visual appearance by multivariate analysis of wood feature data. Journal of Wood Science. doi:10.1007/s10086-014-1410-6
   Web of Science ®Google Scholar
• Broman, N. O. (2000) Means to measure the aesthetic properties of wood. Doctoral thesis, 26 (Luleå: Luleå University of Technology).
   Google Scholar
• Chiorescu, S. and Grönlund, A. (2000) Validation of a CT-based simulator against a sawmill yield. Forest Products Journal, 50, 69–76.
   Web of Science ®Google Scholar
• Donovan, G. and Nicholls, D. (2003) Consumer preferences and willingness to pay for character-marked cabinets from Alaska birch. Forest Products Journal, 37, 56–62.
   Google Scholar
• Eriksson, L., Johansson, E., Kettaneh-Wold, N., Trygg, J., Wikström, C. and Wold, S. (2006) Multi- and Megavariate Data Analysis – Part I: Basic Principles and Applications (Umeå: Umetrics AB).
   Google Scholar
• Fredriksson, M. (2014) Log sawing position optimization using computed tomography scanning. Wood Material Science and Engineering, 9, 110–119. 10.1080/17480272.2014.904430
   Google Scholar
• Funt, B. V. and Bryant, E. C. (1987) Detection of internal log defects by automatic interpretation of computer tomography images. Forest Products Journal, 53, 27–32.
   Google Scholar
• Giudiceandrea, F., Ursella, E. and Vicario, E. (2011) A high speed CT scanner for the sawmill industry. Proceedings of the 17th International Non Destructive Testing and Evaluation of Wood Symposium, 14–16 September, University of West Hungary, Sopron.
   Google Scholar
• Johansson, E., Johansson, D., Skog, J. and Fredriksson, M. (2013) Automated knot detection for high speed computed tomography on Pinus sylvestris L. and Picea abies (L.) Karst. using ellipse fitting in concentric surfaces. Computers and Electronics in Agriculture, 96, 238–245. 10.1016/j.compag.2013.06.003
   Web of Science ®Google Scholar
• Knapic, S., Seppä, I. P., Usenius, A. and Pereira, H. (2011) Stem modeling and simulation of conversion of cork oak stems for quality wood products. European Journal of Forest Research, 130, 745–751. 10.1007/s10342-010-0467-z
   Web of Science ®Google Scholar
• Longuetaud, F., Leban, J.-M., Mothe, F., Kerrien, E. and Berger, M.-O. (2004) Automatic detection of pith on CT images of spruce logs. Computers and Electronics in Agriculture, 44, 107–119. 10.1016/j.compag.2004.03.005
   Web of Science ®Google Scholar
• Longuetaud, F., Mothe, F. and Leban, J.-M. (2007) Automatic detection of the heartwood/sapwood boundary within Norway spruce (Picea abies (L.) Karst.) logs by means of CT images. Computers and Electronics in Agriculture, 58, 100–111. 10.1016/j.compag.2007.03.010
   Web of Science ®Google Scholar
• Lundahl, C. G. and Grönlund, A. (2010) Increased yield in sawmills by applying alternate rotation and lateral positioning. Forest Products Journal, 60, 331–338. 10.13073/0015-7473-60.4.331
   Web of Science ®Google Scholar
• Maness, T. and Donald, S. (1994) The effect of log rotation on value recovery in chip and saw sawmills. Wood and Fibre Science, 26, 546–555.
   Web of Science ®Google Scholar
• MathWorks (2007) MATLAB 7.5.0 (Release 2007b) (Natick: MathWorks).
   Google Scholar
• Nicholls, D. L. and Barber, V. (2010) Character-marked red alder lumber from Southeastern Alaska: Profiled panel product preferences by residential consumers. Forest Products Journal, 60, 315–321. 10.13073/0015-7473-60.4.315
   Web of Science ®Google Scholar
• Nordmark, U. (2005) Value recovery and production control in the forestry–wood chain using simulation technique. Doctoral thesis, 21 (Luleå: Luleå University of Technology).
   Google Scholar
• Pinto, I., Usenius, A., Song, T. and Pereira, H. (2005) Sawing simulation of maritime pine (Pinus pinaster Ait.) stems for production of heartwood containing components. Forest Products Journal, 55, 88–96.
   Web of Science ®Google Scholar
• Rinnhofer, A., Petutschnigg, A. and Andreu, J.-P. (2003) Internal log scanning for optimizing breakdown. Computers and Electronics in Agriculture, 41, 7–21. 10.1016/S0168-1699(03)00039-5
   Web of Science ®Google Scholar
• Stängle, S., Brüchert, F., Heikkila, A., Usenius, T., Usenius, A. and Sauter, U. H. (2014) Potentially increased sawmill yield from hardwoods using X-ray computed tomography for knot detection. Annals of Forest Science. doi:10.1007/s13595-014-0385-1
   Google Scholar
• Tulokas, T. and Tannous, J. (2010) Research method and improvement of log rotation in sawmills. Silva Fennica, 44, 141–154. 10.14214/sf.459
   Web of Science ®Google Scholar
• Umetrics AB (2013) SIMCA 13 (Umeå: Umetrics AB).
   Google Scholar