The use of acousto-ultrasonics to determine the quality of the brazing of carbide-tipped cutting tools

References

• Barbatti, C. F., Sket, F., Garcia, J. and Pyzalla, A. (2006) Influence of binder metal and surface treatment on the corrosion resistance of (W,Ti)C-based hardmetals. Surface and Coatings Technology, 201(6), 3314–3327. doi: 10.1016/j.surfcoat.2006.07.135
   Web of Science ®Google Scholar
• Barbatti, C., Garcia, J., Sket, F., Kostka, A. and Pyzalla, A. R. (2008) Influence of nitridation on surface microstructure and properties of graded cemented carbides with Co and Ni binders. Surface and Coatings Technology, 202(24), 5962–5975. doi: 10.1016/j.surfcoat.2008.06.179
   Web of Science ®Google Scholar
• Beall, F. C., Biernacki, J. M. and Lemaster, R. L. (1994) The use of acousto-ultrasonics to detect biodeterioration in utility poles. Journal of Acoustic Emission, 12(2), 55–64.
   Google Scholar
• Breckenridge, F. R., Proctor, T. M., Hsu, N. N., Fick, S. E. and Eitzen, D. G. (1990) Transient sources for acoustic emission work. Progress in acoustic emission. In K. Yamaguchi, H. Takahashi and H. Niitsuma (eds.) Proceedings of the 10th International Acoustic Emission Symposium (Sendai, Japan: Japanese Society for Non-destructive Testing), pp. 20–37.
   Google Scholar
• Broberg, P. and Runnemalm, A. (2012) Detection of surface cracks in welds using active thermography. 18th World Conference on Nondestructive Testing, Durban, South Africa.
   Google Scholar
• Duke, J. C.Jr., Henneke, E. G. II, Kiernan, M. T. and Grosskopf, P. P. (1989) A Study of the Stress Wave Factor Technique for Evaluation of Composite Materials. NASA Contractor Report No. 4195, pp. 56.
   Google Scholar
• Egle, D. M. and Brown, A. E. (1976) A note on pseudo-acoustic emission sources. Journal of Testing and Evaluation, 4(3), 196–199. doi: 10.1520/JTE10201J
   Web of Science ®Google Scholar
• Gero, B. M. (1997) Acousto-ultrasonic Evaluation of Cyclic Fatigue of Spot Welded Structures. Thesis, Virginia Polytechnic Institute and State University, 61 pp.
   Google Scholar
• Hsu, N. N. (1977) US Patent 4, 018, 084.
   Google Scholar
• Klochko, N. A. and Shvetsova, T. I. (1976) Brazing conditions for reducing stresses in carbide tips. Stanki I Instruments, 47(11), 24–26.
   Google Scholar
• Lemaster, R. L., Biernacki, J. M. and Beall, F. C. (1994) The feasibility of using acousto-ultrasonics to detect decay in utility poles. In Proceedings of the 9th International Symposium on Nondestructive Testing of Wood (Madison, WI), pp. 84–91.
   Google Scholar
• Martinson, E. and Delsing, J. (2010) Electric spark discharge as an ultrasonic generator in flow measurement situations. Flow Measurement and Instrumentation, 21(3), 394–401. doi: 10.1016/j.flowmeasinst.2010.04.011
   Web of Science ®Google Scholar
• McKie, A. D. W. and Addison, R. C. (1994) Practical considerations for the rapid inspection of composite materials using laser-based ultrasound. Journal of Ultrasonics, 32(5), 333–345. doi: 10.1016/0041-624X(94)90103-1
   Web of Science ®Google Scholar
• Nowacki, J. and Kaiwak, M. (2009) Microstructure and characteristics of high dimension brazed joints of cermets and steel. Journal of Achievements in Materials and Manufacturing Engineering, 37(2), 448–457.
   Google Scholar
• Rabinkin, A. and Pounds, S. (1989) Brazing cemented carbides: Specifics, braze optimization and custom-designed METGLAS brazing filler metals. International Journal of Refractory Metals & Hard Materials, 8(4), 224–231.
   Google Scholar
• Roberts, P. M. (1987) Brazing cemented carbide. Metal Construction, 19(1), 12–18.
   Google Scholar
• Sriyubol, T. and Nontakaew, U. (2011) Non-destructive inspection of brazed joint by pulsed phase thermography. The 2nd TSME International Conference on Mechanical Engineering.
   Google Scholar
• Vary, A. (1991) Acousto-ultrasonics: Retrospective exhortation with bibliography. Journal of Acoustic Emission, (May), 581–591.
   Google Scholar