Potential for increasing volume yield by reducing planing allowance

References

• Anonymous (1997) EN 1310:1997. European Standard for Round and Sawn Timber Measurement of Features (CEN).
   Google Scholar
• Axelsson, B. O. M. (1994) Lateral cutting force during machining of wood due to momentary disturbances in the wood structure and degree of wear of the cutting tool. Holz als Roh-und Werkstoff, 52(3), 198–204. doi: 10.1007/BF02615223
   Google Scholar
• Axelsson, A. (2012) How Planing Affects Warp. Licentiate thesis (Luleå University of Technology).
   Google Scholar
• Axelsson, A. (2013) Rectangularity of planed Scots pine (Pinus sylvestris) planks. Wood Material Science and Engineering, 8(2), 145–151. doi: 10.1080/17480272.2012.749300
   Google Scholar
• Brown, T. D. (2000) Performance Excellence in the Wood Products Industry. Lumber Size Control Part 2: Size Analysis Considerations (Corvallis: Oregon State University).
   Google Scholar
• Chiorescu, S. and Grönlund, A. (1999) Validation of a CT-based simulator against a sawmill yield. Forest Products Journal, 50, 69–76.
   Web of Science ®Google Scholar
• Cristóvão, L., Ekevad, M. and Grönlund, A. (2012) Natural frequencies of roll-tensioned circular sawblades: Effects of roller loads, number of grooves, and groove positions. BioResources, 7(2), 2209–2219. doi: 10.15376/biores.7.2.2209-2219
   Web of Science ®Google Scholar
• Ekevad, M., Cristóvão, L., Grönlund, A. and Öhman, M. (2014) Geometry of kerf when curve sawing with a circular rip-saw. European Journal of Wood and Wood Products, 72(6), 809–814. doi: 10.1007/s00107-014-0832-6
   Web of Science ®Google Scholar
• Grönlund, A., Björklund, L., Grundberg, S. and Berggren, G. (1995) Manual för furustambank [Manual for Pine Stem Bank]. Technical Report No. 19 (Luleå: Luleå Universtity of Technology).
   Google Scholar
• Hajek, B. and Esping, B. (1996) Val av råmått för torkning till olika slutfuktkvoter [Selection of Green Target Dimensions for Drying to Different Final Moisture Contents] (Stockholm: Trätek: Swedish Institute of Wood Technology Research).
   Google Scholar
• Lundahl, C. G. and Grönlund, A. (2010) Increased yield in sawmills by applying alternate rotation and lateral positioning. Forest Products Journal, 60, 331–338. doi: 10.13073/0015-7473-60.4.331
   Web of Science ®Google Scholar
• Moberg, L. and Nordmark, U. (2006) Predicting lumber volume and grade recovery for Scots pine stems using tree models and sawmill conversion simulation. Forest Products Journal, 56, 68–74.
   Web of Science ®Google Scholar
• Mote, C. and Szymani, D. (1977) A review report on principal developments in thin circular saw vibration and control research. Holz als Roh- und Werkstoff, 35(5), 189–196. doi: 10.1007/BF02610942
   Google Scholar
• Nishio, S. and Marui, E. (1996) Effects of slots on the lateral vibration of a circular saw blade. International Journal of Machine Tools & Manufacture, 36(7), 771–787. doi: 10.1016/0890-6955(95)00088-7
   Web of Science ®Google Scholar
• Nordic Timber (1994) Nordiskt trä: sorteringsregler för sågat virke av furu (Pinus sylvestris) och gran (Picea abies): fyrsidig kvalitetssortering för handelsbruk [Grading Rules for Pine (Pinus sylvestris) and Spruce (Picea abies) Sawn Timber: Commercial Grading Based on Evaluation of the Four Sides of Sawn Timber] (1. uppl.) (Stockholm: Arbor Publishing).
   Google Scholar
• Nordmark, U. (2005) Value Recovery and Production Control in the Forestry Wood Chain Using Simulation Technique. Dissertation (Sweden: Luleå University of Technology).
   Google Scholar
• Olsson, R. (2003) Fakta om biobränsle, Info från projektet Bioenergi från skogen. Bioenergi från skogsprodukter [Facts About Biofuels, Information from the Project Bioenergy from the Forest. Bioenergy from Forest Products] (Umeå: SLU-BTK).
   Google Scholar
• Steele, P. H. (1984) Factors Determining Lumber Recovery in Sawmilling. USDA Forest Service General Technical Report FPL No. 39 [Madison, WI: Forest Products Laboratory].
   Google Scholar
• Swedish Forest Agency (2014) Swedish Statistical Yearbook of Forestry 2014 (Jönköping: Swedish Forest Agency).
   Google Scholar
• Szymani, R. and Mote, C. (1977) Principal developments in thin circular saw vibration and control research. Holz als Roh- und Werkstoff, 35(6), 219–225. doi: 10.1007/BF02608337
   Google Scholar