References
- Deutscher Ausschuss für Stahlbeton e. V. (1985) ETB – Absturzsicherung, 1985. ETB – Richtlinie “Bauteile, die gegen Absturz suchern”.
- Deutsches Institut für Bautechnik DIBt. (2013) Z-21.9-1544: 2013. Rückseitige Befestigung von Trespa Meteon/FR-KR Fassadenplatten mittels KEIL Hinterschnittanker KH.
- Deutsches Institut für Bautechnik DIBt. (2016) ETA-15/0615: 2016. Keep-nut – Fastener for rear fixing of facade panels according to EN 14411:2012.
- Deutsches Institut für Bautechnik DIBt. (2017) Z-9.1-863: 2017. Kebony Clear Decking.
- European Committee for Standardization CEN. (2002) EN 13183-1: 2002. Moisture content of a piece of sawn timber – Part 1: Determination by oven dry method.
- European Committee for Standardization CEN. (2010) EN 1990: 2010. Eurocode – Basis of structural design.
- European Committee for Standardization CEN. (2014) DIN EN 1995-1-1: 2014. Eurocode 5: Design of timber structures – Part 1-1: General – Common rules and rules for building.
- European Committee for Standardization CEN. (2016a) EN 438-1: 2016. High-pressure decorative laminates (HPL) – Sheets based on thermosetting resins (usually called laminates) – Part 1: Introduction and general Information.
- European Committee for Standardization CEN. (2016b) EN 1382: 2016. Timber structures - Test methods – Withdrawal capacity of timber fasteners.
- European Organisation for Technical Approvals. (2012) ETAG 034: 2012. Guidline for European technical approval of kits for external wall claddings Part 1: Ventilated cladding kits comprosing cladding components and associated fixings.
- Gaunt, D. (2004) The effect of thread geometry on screw withdrawal strength. NZ Timber Design Journal, Bd. 3, 6, 12–20.
- Hackspiel, C. (2014) Endbericht - HGV-Koppelleiste - Alternativprodukte (Wien: Holz Forschung Austria).
- Jahn, F. (2017) Fastening system of glass-wood-hybrid balustrade. Unpublished thesis, Technische Universität Dresden.
- Joščák, P., Langová, N. and Tvrdovský, M. (2014) Withdrawal resistance of wood screw in wood-based materials. Forestry and Wood Technology, 87, S. 90–S. 96.
- Kobayashi, K. und Ando, N. (2006) The lateral resistance of wood screw joints with wood-based panels. In 9th World Conference on Timber Engineering, Curran Associates, Portland, S. 2502–2505.
- Maleki, S., Najafi, S. K., Ebrahimi, G. and Ghofrani, M. (2017) Withdrawal resistance of screws in structural composite lumber made of poplar (populous deltoids). Construction and Building Materials, 142, 499–505. doi: 10.1016/j.conbuildmat.2017.03.039
- Nicklisch, F., Giese-Hinz, J. and Weller, B. (2016) Glued windows and timber-glass façades – performance of a silicone joint between glass and different types of wood. In J. Schnieder and B. Weller (eds.) Engineered Transparency 2016 Glass in Architecture and Structural Engineering (Berlin: Ernst Sohn), pp. 598–602.
- Shi, G., Zhang, J., Wang, Y., Huang, H. and Zhang, Z. (2011) Cooperation pullout test of double self-tapping screws in wood structures. Advanced Materials Research, 374–377, 2520–2524. doi: 10.4028/www.scientific.net/AMR.374-377.2520
- Stamatopoulos, H. and Malo, K. A. (2016) Withdrawal stiffness of threaded rods embedded in timber elements. Construction and Building Materials, 116, 263–272. doi: 10.1016/j.conbuildmat.2016.04.144
- Tomasi, R., Alessandro, C., und Maurizio, P. (2010) Theoretical and experimental analysis of timber-to-timber joints connected with inclined screws. Construction and Building Materials, 24, 1560–1571. doi: 10.1016/j.conbuildmat.2010.03.007