References
- Abrate, S. (1991) Impact on Laminated composite materials. Applied Mechanics Reviews, 44(4), 155–190. doi: https://doi.org/10.1115/1.3119500
- Abrate, S. (2011) Impact Engineering of Composite Structures (New York: Springer Vienna).
- Aisyah, H. A., et al. (2013) Properties of medium density fibreboard (MDF) from kenaf (Hibiscus cannabinus L.) core as function of refining conditions. Composites Part B: Engineering, 44(1), 592–596. doi: https://doi.org/10.1016/j.compositesb.2012.02.029
- Alamri, H. and Low, I. M. (2013) Effect of water absorption on the mechanical properties of nanoclay filled recycled cellulose fibre reinforced epoxy hybrid nanocomposites. Composites Part A: Applied Science and Manufacturing, 44, 23–31. doi: https://doi.org/10.1016/j.compositesa.2012.08.026
- Anuj, K., Gupta, A., Sharma, K. V. and Nasir, M. (2013) Use of aluminum oxide nanoparticles in wood composites to enhance the heat transfer during hot-pressing. European Journal of Wood and Wood Products, 71(2), 193–198. doi: https://doi.org/10.1007/s00107-013-0664-9
- Arabi, M., et al. (2011) Interaction analysis between slenderness ratio and resin content on mechanical properties of particleboard. Journal of Forestry Research, 22(3), 461–464. doi: https://doi.org/10.1007/s11676-011-0188-2
- Assaedi, H., Shaikh, F. U. A. and Low, I. M. (2016) Characterizations of flax fabric reinforced nanoclay-geopolymer composites. Composites Part B: Engineering, 95(Supplement C), 412–422. doi: https://doi.org/10.1016/j.compositesb.2016.04.007
- Ates, S., et al. (2017) Effects of heat treatment on some properties of MDF (medium-density fiberboard). Wood Material Science & Engineering, 12(3), 158–164. doi: https://doi.org/10.1080/17480272.2015.1073176
- Balıkoğlu, F., et al. (2018) Compression after low velocity impact tests of marine sandwich composites: effect of intermediate wooden layers. Composite Structures, 183(Supplement C), 636–642. doi: https://doi.org/10.1016/j.compstruct.2017.08.003
- Benmansour, N., et al. (2014) Thermal and mechanical performance of natural mortar reinforced with date palm fibers for use as insulating materials in building. Energy and Buildings, 81, 98–104. doi: https://doi.org/10.1016/j.enbuild.2014.05.032
- BS-EN-310 (1993) Wood-based Panels. Determination of Modulus of Elasticity in Bending and of Bending Strength (London: British Standards Institution).
- BS-EN-317 (1993) Particleboards and Fibreboards. Determination of Swelling in Thickness After Immersion in Water (London: British Standards Institution).
- BS-EN-319 (1993) Particleboards and Fibreboards. Determination of Tensile Strength Perpendicular to the Plane of the Board (London: British Standards Institution).
- BS-EN-322 (1993) Wood-based Panels. Determination of Moisture Content (London: British Standards Institution).
- BS-EN-323 (1993) Wood-based Panels. Determination of Density (London: British Standards Institution).
- Cantwell, W. J. and Morton, J. (1991) The impact resistance of composite materials — a review. Composites, 22(5), 347–362. doi: https://doi.org/10.1016/0010-4361(91)90549-V
- Chavooshi, A., et al. (2014) MDF dust/PP composites reinforced with nanoclay: Morphology, long-term physical properties and withdrawal strength of fasteners in dry and saturated conditions. Construction and Building Materials, 52, 324–330. doi: https://doi.org/10.1016/j.conbuildmat.2013.11.045
- Deka, B. K. and Maji, T. K. (2011a) Effect of TiO2 and nanoclay on the properties of wood polymer nanocomposite. Composites Part A: Applied Science and Manufacturing, 42(12), 2117–2125. doi: https://doi.org/10.1016/j.compositesa.2011.09.023
- Deka, B. K. and Maji, T. K. (2011b) Study on the properties of nanocomposite based on high density polyethylene, polypropylene, polyvinyl chloride and wood. Composites Part A: Applied Science and Manufacturing, 42(6), 686–693. doi: https://doi.org/10.1016/j.compositesa.2011.02.009
- Ee Ding, W., Zhang, M., Qian, W. and Shuichi, K. (1998) Effects of mat moisture content and press closing speed on the formation of density profile and properties of particleboard. Journal of Wood Science, 44(4), 287–295. doi: https://doi.org/10.1007/BF00581309
- Esmailpour, A., et al. (2019) Nano-wollastonite to improve fire retardancy in medium-density fiberboard (MDF) made from wood fibers and camel-thorn. Wood Material Science & Engineering, 14, 1–5. doi: https://doi.org/10.1080/17480272.2019.1641838
- Fortin-Smith, J., et al. (2016) Characterization of maple and Ash material properties as a function of wood density for Bat/ball impact modeling in LS-DYNA. Procedia Engineering, 147(Supplement C), 413–418. doi: https://doi.org/10.1016/j.proeng.2016.06.331
- Glé, P., Gourdon, E. and Arnaud, L. (2011) Acoustical properties of materials made of vegetable particles with several scales of porosity. Applied Acoustics, 72(5), 249–259. doi: https://doi.org/10.1016/j.apacoust.2010.11.003
- Haseli, M., Layeghi, M. and Zarea Hosseinabadi, H. (2018) Characterization of blockboard and battenboard sandwich panels from date palm waste trunks. Measurement, 124, 329–337. doi: https://doi.org/10.1016/j.measurement.2018.04.040
- Hazrati-Behnagh, M., et al. (2016) Mechanical and insulating performances of ultralight thick particleboard from sugarcane residues and woods planer shaving. European Journal of Wood and Wood Products, 74(2), 161–168. doi: https://doi.org/10.1007/s00107-015-0989-7
- Hoo Fatt, M. S. and Lin, C. (2004) Perforation of clamped, woven E-glass/polyester panels. Composites Part B: Engineering, 35(5), 359–378. doi: https://doi.org/10.1016/j.compositesb.2003.04.001
- Jonoobi, M., et al. (2017) Effect of surface modification of fibers on the medium density fiberboard properties. European Journal of Wood and Wood Products, 76, 108–116.
- Jover, N., Shafiq, B. and Vaidya, U. (2014) Ballistic impact analysis of balsa core sandwich composites. Composites Part B: Engineering, 67(Supplement C), 160–169. doi: https://doi.org/10.1016/j.compositesb.2014.07.002
- Koli, D. K., Agnihotri, G. and Purohit, R. (2014) A Review on properties, Behaviour and processing methods for Al- Nano Al2O3 composites. Procedia Materials Science, 6, 567–589. doi: https://doi.org/10.1016/j.mspro.2014.07.072
- Liu, T., et al. (2017) Energy absorption characteristics of sandwich structures with composite sheets and bio coconut core. Composites Part B: Engineering, 114(Supplement C), 328–338. doi: https://doi.org/10.1016/j.compositesb.2017.01.035
- Mantanis, G. I., et al. (2018) Adhesive systems used in the European particleboard, MDF and OSB industries. Wood Material Science & Engineering, 13(2), 104–116. doi: https://doi.org/10.1080/17480272.2017.1396622
- Mantanis, G. I., et al. (2019) Technological properties and fire performance of medium density fibreboard (MDF) treated with selected polyphosphate-based fire retardants. Wood Material Science & Engineering, 14, 1–9. doi: https://doi.org/10.1080/17480272.2019.1596159
- Mirianon, F., et al. (2008) A Method to Model Wood by Using ABAQUS Finite Element Software: Part 2. Application to Dowel Type Connections (Espoo: VTT Technical Research Centre of Finland).
- Moses, D. M. and Prion, H. G. L. (2004) Stress and failure analysis of wood composites: a new model. Composites Part B: Engineering, 35(3), 251–261. doi: https://doi.org/10.1016/j.compositesb.2003.10.002
- Nilsen, T. S., 2015. Numerical modelling of wood microstructure. (Master degree). Norwegian University of Science and Technology.
- Olmedo, I., et al. (2016) Discrete element model of the dynamic response of fresh wood stems to impact. Engineering Structures, 120(Supplement C), 13–22. doi: https://doi.org/10.1016/j.engstruct.2016.03.025
- Rathke, J., et al. (2012) Fracture energy vs. internal bond strength – mechanical characterization of wood-based panels. Wood Material Science & Engineering, 7(4), 176–185. doi: https://doi.org/10.1080/17480272.2012.699979
- TS., N. (2015) Numerical modelling of Wood Microstructure: Norwegian University of Science and Technology.
- Vaidya, U. K. (2011) Impact response of Laminated and sandwich composites. In S. Abrate (ed.), Impact Engineering of Composite Structures (Vienna: Springer Vienna), pp. 97–191.
- Xing, C., Deng, J. and Zhang, S. Y. (2007) Effect of thermo-mechanical refining on properties of MDF made from black spruce bark. Wood Science and Technology, 41(4), 329–338. doi: https://doi.org/10.1007/s00226-006-0108-3
- Yoshihara, H. and Yoshinobu, M. (2015) Measurement of the in-plane shear modulus of medium-density fibreboard by torsional and flexural vibration tests. Measurement, 60, 33–38. doi: https://doi.org/10.1016/j.measurement.2014.09.066