Vacuum-heat treatment of Scots pine (Pinus sylvestris L.) wood pretreated with propanetriol

References

• Allegretti, O., Brunetti, M., Cuccui, I., Ferrari, S., Nocetti, M. and Terziev, N. (2012) Thermo-vacuum modification of spruce (Picea abies Karst.) and fir (Abies alba Mill.) wood. BioResources, 7(3), 3656–3669.
   Web of Science ®Google Scholar
• Almazrouei, M., El Samad, T. and Janajreh, I. (2017) Thermogravimetric kinetics and high fidelity analysis of crude glycerol. Energy Procedia, 142, 1699–1705.
   Google Scholar
• ASTM D143-14 (2014) Standard Test Methods for Small Clear Specimens of Timber (West Conshohocken, PA: ASTM International).
   Google Scholar
• Behr, G., Bollmus, S., Gellerich, A. and Militz, H. (2018) Improvement of mechanical properties of thermally modified hardwood through melamine treatment. Wood Material Science & Engineering, 13(5), 262–270.
   Web of Science ®Google Scholar
• Bekhta, P. and Niemz, P. (2003) Effect of high temperature on the change in color, dimensional stability and mechanical properties of spruce wood. Holzforschung, 57(5), 539–546.
   Web of Science ®Google Scholar
• Berube, M. A., Schorr, D., Ball, R. J., Landry, V. and Blanchet, P. (2018) Determination of in situ esterification parameters of citric acid-glycerol based polymers for wood impregnation. Journal of Polymers and the Environment, 26(3), 970–979.
   Web of Science ®Google Scholar
• Brischke, C., Bayerbach, R. and Otto Rapp, A. (2006) Decay-influencing factors: A basis for service life prediction of wood and wood-based products. Wood Material Science and Engineering, 1(3–4), 91–107.
   Google Scholar
• Brischke, C., Welzbacher, C. R., Brandt, K. and Rapp, A. O. (2007) Quality control of thermally modified timber: Interrelationship between heat treatment intensities and CIE L* a* b* color data on shomogenised wood samples. Holzforschung, 61(1), 19–22.
   Web of Science ®Google Scholar
• Calonego, F. W., Severo, E. T. D. and Furtado, E. L. (2010) Decay resistance of thermally-modified Eucalyptus grandis wood at 140 ℃, 160 ℃, 180 ℃, 200 ℃ and 220 ℃. Bioresource Technology, 101(23), 9391–9394.
   PubMed Web of Science ®Google Scholar
• Castelló, M., Dweck, J. and Aranda, D. (2009) Thermal stability and water content determination of glycerol by thermogravimetry. Journal of Thermal Analysis and Calorimetry, 97(2), 627–630.
   Web of Science ®Google Scholar
• Endo, K., Obataya, E., Zeniya, N. and Matsuo, M. (2016) Effects of heating humidity on the physical properties of hydrothermally treated spruce wood. Wood Science and Technology, 50(6), 1161–1179.
   Web of Science ®Google Scholar
• Esteves, B., Marques, A. V., Domingos, I. and Pereira, H. (2007) Influence of steam heating on the properties of pine (Pinus pinaster) and eucalypt (Eucalyptus globulus) wood. Wood Science and Technology, 41(3), 193–207.
   Web of Science ®Google Scholar
• Esteves, B. M., Domingos, I. J. and Pereira, H. M. (2008) Pine wood modification by heat treatment in air. BioResources, 3(1), 142–154.
   Web of Science ®Google Scholar
• Esteves, B. and Pereira, H. (2009) Wood modification by heat treatment: A review. BioResources, 4(1), 370–404.
   Web of Science ®Google Scholar
• Ferrari, S., Cuccui, I. and Allegretti, O. (2013) Thermo-vacuum modification of some European softwood and hardwood species treated at different conditions. BioResources, 8(1), 1100–1109.
   Web of Science ®Google Scholar
• González-Peña, M. M. and Hale, M. D. (2009) Colour in thermally modified wood of beech, Norway spruce and Scots pine. Part 1: Colour evolution and colour changes. Holzforschung, 63(4), 385–393.
   Web of Science ®Google Scholar
• Hong, S. H., Kim, C. H., Lim, H. M. and Kang, H. Y. (2013) Measuring PEG retentions and EMCs of PEG impregnated softwood specimens after heat-treatment. Journal of the Korean Wood Science and Technology, 41(3), 173–180.
   Google Scholar
• Hosseinpourpia, R. and Mai, C. (2016) Mode of action of brown rot decay resistance of thermally modified wood: Resistance to Fenton's reagent. Holzforschung, 70(7), 691–697.
   Web of Science ®Google Scholar
• Hosseinpourpia, R., Adamopoulos, S. and Mai, C. (2016) Dynamic vapour sorption of wood and holocellulose modified with thermosetting resins. Wood Science and Technology, 50(1), 165–178.
   Web of Science ®Google Scholar
• Hosseinpourpia, R., Adamopoulos, S., Holstein, N. and Mai, C. (2017) Dynamic vapour sorption and water-related properties of thermally modified Scots pine (Pinus sylvestris L.) wood pretreated with proton acid. Polymer Degradation and Stability, 138, 161–168.
   Web of Science ®Google Scholar
• Hosseinpourpia, R., Adamopoulos, S. and Parsland, C. (2019) Utilization of different tall oils for improving the water resistance of cellulosic fibers. Journal of Applied Polymer Science, 136(13), Article ID 47303.
   Web of Science ®Google Scholar
• Johansson, D. and Morén, T. (2006) The potential of colour measurement for strength prediction of thermally treated wood. Holz als Roh-und Werkstoff, 64(2), 104–110.
   Google Scholar
• Korkut, S., Akgül, M. and Dündar, T. (2008) The effects of heat treatment on some technological properties of Scots pine (Pinus sylvestris L.) wood. Bioresource Technology, 99(6), 1861–1868.
   PubMed Web of Science ®Google Scholar
• Kutnar, A., Kričej, B., Pavlič, M. and Petrič, M. (2013) Influence of treatment temperature on wettability of Norway spruce thermally modified in vacuum. Journal of Adhesion Science and Technology, 27(9), 963–972.
   Web of Science ®Google Scholar
• Lekounougou, S. and Kocaefe, D. (2014) Effect of thermal modification temperature on the mechanical properties, dimensional stability, and biological durability of black spruce (Picea mariana). Wood Material Science Engineering, 9(2), 59–66.
   Google Scholar
• Liu, R., Morrell, J. J. and Yan, L. (2018) Thermogravimetric analysis studies of thermally-treated glycerol impregnated poplar wood. BioResources, 13(1), 1563–1575.
   Web of Science ®Google Scholar
• Luo, S., Cao, J. and Peng, Y. (2014) Properties of glycerin-thermally modified wood flour/polypropylene composites. Polymer Composites, 35(2), 201–207.
   Web of Science ®Google Scholar
• Militz, H. (2002) Thermal treatment of wood: European processes and their background (IRG/WP 02-40241), In: 33rd Annual Meeting for International Research Group on Wood Preservation, Cardiff, UK.
   Google Scholar
• Mitsui, K., Takada, H., Sugiyama, M. and Hasegawa, R. (2001) Changes in the properties of light-irradiated wood with heat treatment. Part 1. Effect of treatment conditions on the change in color. Holzforschung, 55(6), 601–605.
   Web of Science ®Google Scholar
• Mohareb, A., Sirmah, P., Petrissans, M. and Gerardin, P. (2012) Effect of heat treatment intensity on wood chemical composition and decay durability of Pinus patula. European Journal of Wood and Wood Products, 70(4), 519–524.
   Web of Science ®Google Scholar
• Mubarok, M., Dumarcay, S., Militz, H., Candelier, K., Thevenon, M. F. and Gérardin, P. (2019) Comparison of different treatments based on glycerol or polyglycerol additives to improve properties of thermally modified wood. European Journal of Wood and Wood Products, 77(5), 799–810.
   Web of Science ®Google Scholar
• Pockrandt, M., Jebrane, M., Cuccui, I., Allegretti, O., UetimaneJr.E. and Terziev, N. (2018) Industrial Thermowood® and Termovuoto thermal modification of two hardwoods from Mozambique. Holzforschung, 72(8), 701–709.
   Web of Science ®Google Scholar
• Poncsak, S., Kocaefe, D., Bouazara, M. and Pichette, A. (2006) Effect of high temperature treatment on the mechanical properties of birch (Betula papyrifera). Wood Science and Technology, 40(8), 647–663.
   Web of Science ®Google Scholar
• Qu, L., Wang, Z., Qian, J., He, Z. and Yi, S. (2019) Effect of combined aluminum-silicon synergistic impregnation and heat treatment on the thermal stability, chemical components, and morphology of wood. Bioresources, 14(1), 349–362.
   Web of Science ®Google Scholar
• Rep, G., Pohleven, F. and Košmerl, S. (2012) Development of the industrial kiln for thermal wood modification by a procedure with an initial vacuum and commercialisation of modified Silvapro wood. In Proceedings of the 6th European Conference on Wood Modification (pp. 11–17). Slovenia: University of Ljubljana Ljubljana.
   Google Scholar
• Roussel, C., Marchetti, V., Lemor, A., Wazniak, B., Loubinoux, B. and Gerardin, P. (2001) Chemical modification of wood by polyglycerol/maleic anhydride treatment. Holzforschung, 55, 57–62.
   Web of Science ®Google Scholar
• Rowell, R. M., Ibach, R. E., McSweeny, J. and Nilsson, T. (2009) Understanding decay resistance, dimensional stability and strength changes in heat-treated and acetylated wood. Wood Material Science and Engineering, 4(1–2), 14–22.
   Google Scholar
• Salman, S., Pétrissans, A., Thévenon, M. F., Dumarçay, S. and Gérardin, P. (2016) Decay and termite resistance of pine blocks impregnated with different additives and subjected to heat treatment. European Journal of Wood and Wood Products, 74(1), 37–42.
   Web of Science ®Google Scholar
• Salman, S., Thévenon, M. F., Pétrissans, A., Dumarçay, S., Candelier, K. and Gérardin, P. (2017) Improvement of the durability of heat-treated wood against termites. Maderas Ciencia y Tecnología, 19(3), 317–328.
   Web of Science ®Google Scholar
• Sandak, A., Sandak, J. and Allegretti, O. (2015) Quality control of vacuum thermally modified wood with near infrared spectroscopy. Vacuum, 114, 44–48.
   Web of Science ®Google Scholar
• Sandberg, D., Haller, P. and Navi, P. (2013) Thermo-hydro and thermo-hydro-mechanical wood processing: An opportunity for future environmentally friendly wood products. Wood Material Science and Engineering, 8(1), 64–88.
   Google Scholar
• Shi, J. L., Kocaefe, D. and Zhang, J. (2007) Mechanical behaviour of Quebec wood species heat-treated using Thermowood process. Holz als Roh-und Werkstoff, 65(4), 255–259.
   Google Scholar
• Sivonen, H., Maunu, S. L., Sundholm, F., Jämsä, S. and Viitaniemi, P. (2002) Magnetic resonance studies of thermally modified wood. Holzforschung, 56(6), 648–654.
   Web of Science ®Google Scholar
• Sivrikaya, H., Tesařová, D., Jeřábková, E. and Can, A. (2019) Color change and emission of volatile organic compounds from Scots pine exposed to heat and vacuum-heat treatment. Journal of Building Engineering, 26, Article ID 100918.
   Web of Science ®Google Scholar
• Soulounganga, P., Loubinoux, B., Wozniak, E., Lemor, A. and Gérardin, P. (2004) Improvement of wood properties by impregnation with polyglycerol methacrylate. Holz als Roh-und Werkstoff, 62(4), 281–285.
   Google Scholar
• Suchy, M., Virtanen, J., Kontturi, E. and Vuorinen, T. (2010a) Impact of drying on wood ultrastructure observed by deuterium exchange and photoacoustic FT-IR spectroscopy. Biomacromolecules, 11(2), 515–520.
   PubMed Web of Science ®Google Scholar
• Suchy, M., Kontturi, E. and Vuorinen, T. (2010b) Impact of drying on wood ultrastructure: Similarities in cell wall alteration between native wood and isolated wood-based fibers. Biomacromolecules, 11(8), 2161–2168.
   PubMed Web of Science ®Google Scholar
• Sun, B., Wang, Z. and Liu, J. (2017) Changes of chemical properties and the water vapour sorption of Eucalyptus pellita wood thermally modified in vacuum. Journal of Wood Science, 63(2), 133–139.
   Web of Science ®Google Scholar
• Sundqvist, B. (2004) Colour Changes and Acid Formation in Wood During Heating, Doctoral Thesis, Lulea University of Technology, Lulea, Sweden.
   Google Scholar
• Tjeerdsma, B. F., Boonstra, M., Pizzi, A., Tekely, P. and Militz, H. (1998) Characterization of thermally modified wood: Molecular reasons for wood performance improvement. Holz als Roh-und Werkstoff, 56(3), 149–153.
   Google Scholar
• Tjeerdsma, B. F. and Militz, H. (2005) Chemical changes in hydrothermal treated wood: FTIR analysis of combined hydrothermal and dry heat-treated wood. Holz als roh-und Werkstoff, 63(2), 102–111.
   Google Scholar
• Tuong, V. M. and Li, J. (2010) Effect of heat treatment on the change in color. BioResources, 5(2), 1257–1267.
   Web of Science ®Google Scholar
• Vieira, M. G. A., da Silva, M. A., dos Santos, L. O. and Beppu, M. M. (2011) Natural-based plasticizers and biopolymer films: A review. European Polymer Journal, 47(3), 254–263.
   Web of Science ®Google Scholar
• Wang, W., Zhu, Y., Cao, J. and Guo, X. (2015) Thermal modification of southern pine combined with wax emulsion preimpregnation: Effect on hydrophobicity and dimensional stability. Holzforschung, 69(4), 405–413.
   Web of Science ®Google Scholar
• Weiland, J. J. and Guyonnet, R. (2003) Study of chemical modifications and fungi degradation of thermally modified wood using DRIFT spectroscopy. Holz als Roh-und Werkstoff, 61(3), 216–220.
   Google Scholar
• Wentzel, M., Fleckenstein, M., Hofmann, T. and Militz, H. (2019) Relation of chemical and mechanical properties of Eucalyptus nitens wood thermally modified in open and closed systems. Wood Material Science & Engineering, 14(3), 165–173.
   Web of Science ®Google Scholar
• Willems, W. and Altgen, M. (2020) Hygrothermolytic wood modification. Process description and treatment level characterisation. Wood Material Science & Engineering, 15(4), 213–222.
   Web of Science ®Google Scholar
• Xiao, Z., Xie, Y., Militz, H. and Mai, C. (2010) Effect of glutaraldehyde on water related properties of solid wood. Holzforschung, 64(4), 483–488.
   Web of Science ®Google Scholar
• Xie, Y., Hill, C. A., Xiao, Z., Mai, C. and Militz, H. (2011) Dynamic water vapour sorption properties of wood treated with glutaraldehyde. Wood Science and Technology, 45(1), 49–61.
   Web of Science ®Google Scholar
• Yan, L., Cao, J., Gao, W., Zhou, X. and Zhao, G. (2011) Interaction between glycerin and wood at various temperatures from stress relaxation approach. Wood Science and Technology, 45(2), 215–222.
   Web of Science ®Google Scholar
• Yan, L. and Morrell, J. J. (2014) Effects of thermal modification on physical and mechanical properties of Douglas fir heartwood. BioResources, 9(4), 7152–7161.
   Web of Science ®Google Scholar
• Yan, L. and Morrell, J. J. (2019) Kinetic color analysis for assessing the effects of borate and glycerol on thermal modification of wood. Wood Science and Technology, 53(23), 263–274.
   Google Scholar
• Zhu, Y., Wang, W. and Cao, J. (2014) Improvement of hydrophobicity and dimensional stability of thermally modified southern pine wood pretreated with oleic acid. BioResources, 9(2), 2431–2445.
   Web of Science ®Google Scholar