Effects of wooden-dowel species, edge banding thickness, and adhesive types on withdrawal strength in MDF-Lam

References

• ASTM D 1037 (1988) Standard Methods of Evaluating the Wood-Base Fiber and Particle Materials (American Society for Testing and Materials).
   Google Scholar
• Bomba, J., Sedivka, P., Böhm, M. and Devera, M. (2014) Influence of moisture content on the bond strength and water resistance of bonded wood joints. BioResources, 9(3), 5208–5218.
   Web of Science ®Google Scholar
• Botter, H., van den Berg, A., Soetens, F., Straalen, I. J. J. and Volt, A. (2001) Influence of surface pre-treatment on the shear stress-strain relationships of structural adhesives. Proceedings of Structural Adhesives in Engineering VI, Institute of Materials.
   Google Scholar
• Bozkurt, A. Y. and Erdin, N. (2011) Wood Technology. Istanbul University Publications, No: 5029, Faculty of Forestry Publication No: 445. ISBN No: 978-975-404-900-8.
   Google Scholar
• Çetin, F. and Gündüz, G. (2016) Evaluation of research studies about physical properties of some wood species in Turkey. Journal of Bartın Faculty of Forestry, 18(2), 175–193.
   Google Scholar
• Derikvand, M. and Ebrahimi, G. (2014) Strength performance of mortise and loose-tenon furniture joints under uniaxial bending moment. Journal of Forestry Research, 25(2), 483–486.
   Web of Science ®Google Scholar
• DIN EN 204 (2016) Classification of Thermoplastic Wood Adhesives for Non-Structural Applications (German Version for Standardization).
   Google Scholar
• Eckelman, C. A. (1969) Engineering concepts of single-pin dowel joint design. Forest Products Journal, 19(12), 52–60.
   Google Scholar
• Eckelman, C. A. (1979) Withdrawal strength of dowel joints: Effect of shear strength. Forest Products Journal, 29(1), 48–52.
   Web of Science ®Google Scholar
• Eckelman, C. A. and Cassens, L. (1985) Withdrawal strength of dowels from wood composites. Forest Products Journal, 35(5), 55–60.
   Web of Science ®Google Scholar
• Eckelman, C. A. and Erdil, Y. Z. (1999) Joint design manual for furniture frames constructed of plywood and oriented strand board. 1st International Furniture Congress Proceedings October 14–17, Istanbul, pp. 266–268.
   Google Scholar
• Efe, H. and Demirci, S. (2000) Çerçeve Konstrüksiyonlu Mobilya Kavelalı Birleştirmelerde Ağaç türü, Tutkal Çeşidi ve Kesit Şeklinin Çekme Direncine Etkileri. Politeknik Dergisi, 3(4), 45–51.
   Google Scholar
• Englesson, T. A. and Osterman, A. (1972) Assembly of Chipboard with Round Dowels. Swedish Forest Products Research Laboratory, Stockholm, Report No. 28.
   Google Scholar
• Erdil, Y. Z. and Eckelman, C. A. (2001) Withdrawal strength of dowels in plywood and oriented strand board. Turkish Journal of Agricultural Forestry, 25(5), 319–327.
   Google Scholar
• Follrich, J., Müller, U. and Gindl, W. (2006) Effects of thermal modification on the adhesion between spruce wood (Picea abies karst.) and a thermoplastic polymer. Holz als Roh und Werkstoff, 64, 373–376.
   Google Scholar
• Kamke, F. A. and Lee, J. N. (2007) Adhesive penetration in wood: A review. Wood Fiber Science, 39(2), 205–220.
   Web of Science ®Google Scholar
• Kronen (2019) PVAc-D4 White Adhesive, İzmir. Accessed: 14 October 2019, available at: http://www.kronen.com.tr/pva-d4-white-adhesive.
   Google Scholar
• Kurt, S., Uysal, B., Özcan, C. and Yildirim, M. N. (2009) The effects of edge banding thickness of Uludag bonded with some adhesives on withdrawal strengths of beech dowel pins in composite materials. BioResources, 4(4), 1682–1693.
   Web of Science ®Google Scholar
• Laiveniece, L. and Morozovs, A. (2014) Penetration depth of adhesive depending on wood anatomical structure. Materials, Methods & Technologies, 8, 84–89.
   Google Scholar
• Örs, Y., Atar, M. and Özçifçi, A. (1999a) Tensile resistance of dowel with the PVAc and polymerin from different types wood or particle or fiberboards. Turkish Journal of Agriculture and Forestry, 23(1), 151–156.
   Google Scholar
• Örs, Y., Atar, M. and Özçifçi, A. (1999b) Effects of edge coverıng on tensıle strength of MDF. Pamukkale University Engineering College Journal of Engineering Sciences, 5(2–3), 1173–1177.
   Google Scholar
• Özcan, C., Uysal, B., Kurt, Ş and Esen, R. (2013) Effect of dowels and adhesive types on withdrawal strength in particleboard and MDF. Journal of Adhesion Science and Technology, 27(8), 843–854.
   Web of Science ®Google Scholar
• Perçin, O. and Uzun, O. (2014) Isıl işlem uygulanmış bazı ağaç malzemelerde yapışma direncinin belirlenmesi. SDÜ Orman Fakültesi Dergisi, 15, 72–76.
   Google Scholar
• Petrissans, M., Gerardin, P., El Bakali, I. and Serraj, M. (2003) Wettability of heat treated wood. Holzforschung, 57, 301–307.
   Web of Science ®Google Scholar
• Romabant (2019) Industrial Glues Professional Adhesive Solution. Kocaeli, available at: https://www.romabant.com/admin/files/DownloadMerkezi/Romabond_Brosur.pdf.
   Google Scholar
• Santos, C. L., De Jesus, A. M. P., Morais, J. J. L. and Lousada, J. L. P. C. (2010) A comparison between the EN 383 and ASTM D 5764 test methods for dowel-bearing strength assessment of wood: Experimental and numerical investigations. Strain, 46(2), 159–174.
   Web of Science ®Google Scholar
• Sernek, M., Boonstra, M., Pizzi, A., Despres, A. and Gerardin, P. (2008) Bonding performance of heat treated wood with structural adhesives. Holz als Roh und Werkstoff, 66(3), 173–180.
   Google Scholar
• Sernek, M., Kamke, F. A. and Glasser, W. G. (2004) Comparative analysis of inactivated wood surface. Holzforschung, 58, 22–31.
   Web of Science ®Google Scholar
• Sieminski, R. and Skarzynska, A. (1989) Surface roughness of different species of wood after sanding. Forest Product Journal, 32, 98–107.
   Google Scholar
• Sözen, E. (2008) Effect of type and thickness of edge banding materials on the strength of corner joints used case furniture. Master Thesis, Zonguldak Karaelmas University. Graduate School of Natural and Applied Sciences, Zonguldak.
   Google Scholar
• Sterley, M., Blümer, H. and Walinder, M. E. P. (2004) Edge and face gluing of green timber using a one-component polyurethane adhesive. Holz als Roh- und Werkstoff, 62, 479–482.
   Google Scholar
• Sulaiman, O., Salim, N., Hashim, R., Yusof, L. H. M., Razak, W., Yunus, N. Y. M., Hashim, W. S. and Azmy, M. H. (2009) Evaluation on the suitability of some adhesives for laminated veneer lumber from oil palm trunks. Materials & Design, 30(9), 3572–3580.
   Web of Science ®Google Scholar
• Tankut, A. N. and Tankut, N. (2010) Evaluation the effects of edge banding type and thickness on the strength of corner joints in case-typefurniture. Materials and Design, 31, 2956–2963.
   Web of Science ®Google Scholar
• TS 2472 (1976) Wood – Determination of Density for Physical and Mechanical Tests (Ankara: Institute of Turkish Standards).
   Google Scholar
• TS 4539 (1985) Wood Joints-Rules of Dowel Joint (Ankara: Institute of Turkish Standards).
   Google Scholar
• Uysal, B. and Kurt, S. (2007) The effect of edge banding thickness of white oak bonded with different adhesives on withdrawal strengths of beech dowels in composite material. Journal of Adhesion Science and Technology, 21(8), 735–744.
   Web of Science ®Google Scholar
• Uysal, B. and Özçifçi, A. (2003) Effects of dowels produced from various materials on withdrawal strength in MDF and PB. Journal of Applied Polymer Science, 88(2), 531–535.
   Web of Science ®Google Scholar
• Vick, C. B. (1999) Adhesive bonding of wood materials. In Wood-Hand Book–Wood as an Engineering Materials, Chapter 9, Forest Pro.Lab.-GTR-113 (Madison, WI: Department of Agriculture, Forest Service, Forest Products Laboratory).
   Google Scholar
• Wang, S., Zhang, Y. and Xing, C. (2007) Effect of drying method on the surface wettability of wood strands. European Journal of Wood and Wood Products, 65(6), 437–442.
   Google Scholar
• Yapici, F., Likos, E. and Esen, R. (2011) The effect of edge banding thickness of some trees on withdrawal strength of beech dowel pins in composite material. Wood Research, 56(4), 601–612.
   Web of Science ®Google Scholar