Effect of nitrogen ion implantation on the life time of WC-Co tools used in particleboard milling

References

• Agwa, M. A. and Megahed, A. A. (2019) New nonlinear regression modeling and multi-objective optimization of cutting parameters in drilling of GFRE composites to minimize delamination. Polymer Testing, 75, 192–204.
   Web of Science ®Google Scholar
• Barlak, M., Olesińska, W., Piekoszewski, J., Werner, Z., Chmielewski, M., Jagielski, J., Kaliński, D., Sartowska, B. and Borkowska, K. (2007) Ion beam modification of ceramic component prior to formation of AlN-Cu joints by direct bonding process. Surface and Coatings Technology, 201, 8317–8321.
   Web of Science ®Google Scholar
• Barlak, M., Wilkowski, J., Szkarłat, F., Werner, Z., Zagórski, J., Staszkiewicz, B. and Osipiuk, J. (2018) The influence of edge defects on the lifetime of wood machining tools. Annals of WULS – SGGW, Forestry and Wood Technology, 104, 533–539.
   Google Scholar
• Barlak, M., Wilkowski, J., Szymanowski, K., Czarniak, P., Podziewski, P., Werner, Z., Zagórski, J. and Staszkiewicz, B. (2019c) Influence of the ion implantation of nitrogen and selected metals on the lifetime of WC-Co indexable knives during MDF machining. Annals of WULS – SGGW, Forestry and Wood Technology, 108, 45–52.
   Google Scholar
• Barlak, M., Wilkowski, J. and Werner, Z. (2019a) Selected problems of modelling depth elements profiles, implanted into tools used in woodworking. Biuletyn Informacyjny OB-RPPD, 3-4, 118–134.
   Google Scholar
• Barlak, M., Wilkowski, J. and Werner, Z. (2019b) Modelling of the ion implantation modification of WC-Co indexable knives for wood machining. Annals of WULS – SGGW, Forestry and Wood Technology, 106, 57–61.
   Google Scholar
• Barlak, M., Wilkowski, J., Werner, Z., Zagórski, J., Staszkiewicz, B. and Szkarłat, F. (2020) The influence of the CO2 ion implantation on the life-time of WC-Co tools used in wood materials machining. Biuletyn Informacyjny OB-RPPD, 3-4, 178–187.
   Google Scholar
• Bayraktar, Ş. and Afyon, F. (2020) Machinability properties of Al-7Si, Al-7Si-4Zn and Al-7Si-4Zn-3Cu alloys. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42, 187.
   Web of Science ®Google Scholar
• Bayraktar, Ş. and Demir, O. (2020) Processing of T6 heat-treated Al-12Si-0.6Mg alloy. Materials and Manufacturing Processes, 35(3), 354–362.
   Web of Science ®Google Scholar
• Bayraktar, Ş. and Hekimoğlu, A. P. (2020) Effect of zinc content and cutting tool coating on the machinability of the Al-(5–35) Zn alloys. Metals and Materials International, 26, 477–490.
   Web of Science ®Google Scholar
• Bayraktar, Ş. and Turgut, Y. (2016) Investigation of the cutting forces and surface roughness in milling carbon-fiber-reinforced polymer composite material. Materials and Technology, 50(4), 591–600.
   Web of Science ®Google Scholar
• Bayraktar, Ş. and Turgut, Y. (2020) Determination of delamination in drilling of carbon fiber reinforced carbon matrix composites/Al 6013-T651 stacks. Measurement, 154, 107493.
   Web of Science ®Google Scholar
• Beer, P., Rudnicki, J., Ciupinski, L., Djouadi, M. A. and Nouveau, C. (2003) Modification by composite coatings of knives made of low alloy steel for wood machining purposes. Surface and Coatings Technology, 174-175, 434–439.
   Web of Science ®Google Scholar
• Dearnaley, G. (1982) The effects of ion implantation upon the mechanical properties of metals and cemented carbides. Radiation Effects, 63, 1–15.
   Web of Science ®Google Scholar
• Dearnaley, G. (1983) Improvement of wear resistance in cemented tungsten carbide by ion implantation. In R. K. Viswanadham, D. J. Rowcliffe, and J. Gurland (eds.) Science of Hard Materials (Boston: Springer Press), pp. 467–484.
   Google Scholar
• Dearnaley, G. and Hartley, N. E. W. (1978) Ion implantation into metals and carbides. Thin Solid Films, 54, 215–232.
   Web of Science ®Google Scholar
• EN 310 (1994) Wood-based Panels – Determination of Modulus of Elasticity in Bending and of Bending Strength (Brussels, Belgium: European Committee for Standardization).
   Google Scholar
• EN 317 (1999) Particleboards and Fibreboards – Determination of Swelling in Thickness after Immersion in Water (Brussels, Belgium: European Committee for Standardization).
   Google Scholar
• EN 319 (1993) Particleboards and Fibreboards – Determination of Tensile Strength Perpendicular to the Plane of the Board (Brussels, Belgium: European Committee for Standardization).
   Google Scholar
• EN 323 (1999) Wood-based Panels – Determination of Density (Brussels, Belgium: European Committee for Standardization).
   Google Scholar
• García, J. A. and Rodríguez, R. J. (2011) Ion implantation techniques for non-electronic applications. Vacuum, 85(12), 1125–1129.
   Web of Science ®Google Scholar
• Kanazawa, K. and Chijiiwa, K. (1988) Characteristics of a nitrogen ion implanted cutting tool. Journal of the Metal Finishing Society of Japan, 39(10), 603–609.
   Google Scholar
• Konarski, P., Kaczorek, K., Kaliński, D., Chmielewski, M., Pietrzak, K. and Barlak, M. (2012) Ion implanted inconel alloy – SIMS and GDMS depth profile analysis. Surface and Interface Analysis, 45, 494–497.
   Web of Science ®Google Scholar
• Koniuszewski, K. and Domański, P. (2016) Reproduction of Equipment Wear Characteristics with Kernel Regression. Proceedings of 21st IEEE Conference on Method and Models in Automation and Robotics, IEEE Institute of Electrical and Electronics Engineers 912–917.
   Google Scholar
• Kupczyk, M. J. (2009) Production and Operation of Cutting Tools with Anti-Wear Coatings (Poznań: Publishing House of Poznań University of Technology).
   Google Scholar
• Liu, S., Yang, T., Liu, C., Jin, Y., Sun, D. and Shen, Y. (2020) Modelling and experimental validation on drilling delamination of aramid fiber reinforced plastic composites. Composite Structures, 236, 111907.
   Web of Science ®Google Scholar
• Mikkelsen, N. J. and Straede, C. A. (1992) Enhanced wear resistance of production tools and steel samples by implantation of nitrogen and carbon ions. Surface and Coatings Technology, 51, 152–156.
   Web of Science ®Google Scholar
• Morozow, D., Barlak, M., Werner, Z., Pisarek, M., Konarski, P., Zagórski, J., Rucki, M., Chałko, L., Łagodziński, M., Narojczyk, J., Krzysiak, Z. and Caban, J. (2021) Wear resistance improvement of cemented tungsten carbide deep-hole drills after ion implantation. Materials, 14(2), 239.
   PubMed Web of Science ®Google Scholar
• Narojczyk, J., Werner, Z., Piekoszewski, J. and Szymczyk, W. (2005) Effects of nitrogen implantation on lifetime of cutting tools made of SK5M tool steel. Vacuum, 78(2-4), 229–233.
   Web of Science ®Google Scholar
• Olesińska, W., Kaliński, D., Chmielewski, M., Diduszko, R. and Włosiński, W. (2006) Influence of titanium on the formation of a “barrier” layer during joining an AlN ceramic with copper by the CDB technique. Journal of Materials Science: Materials in Electronics, 17, 781–788.
   Web of Science ®Google Scholar
• Onikura, H., Ishimaru, Y. and Katsuki, A. (1988) Cutting characteristics of nitrogen-ion-implanted drills. Journal of the Japan Society for Precision Engineering, 54(4), 781–786.
   Google Scholar
• Piekoszewski, J., Kempinski, W., Andrzejewski, B., Trybuła, Z., Piekara-Sady, L., Kaszyński, J., Stankowski, J., Werner, Z., Richter, E., Prokert, F., Stanisławski, J. and Barlak, M. (2004) Superconductivity of MgB2 thin films prepared by ion implantation and pulsed plasma treatment. Vacuum, 78, 123–129.
   Web of Science ®Google Scholar
• Pisarek, M., Lewandowska, M., Roguska, A., Kurzydłowski, K. J. and Janik-Czachor, M. (2007) SEM, scanning auger and XPS characterization of chemically pretreated Ti surfaces intendent for biomedical applications. Materials Chemistry and Physics, 104, 93–97.
   Web of Science ®Google Scholar
• Porankiewicz, B. and Chamot, E. (2005) Tribochemical reactions of steel in cutting edge material during secondary wood products cutting. Tribology Letters, 19(2), 73–82.
   Web of Science ®Google Scholar
• Raebel, S., Worzala, F. J. and Conrad, J. R. (1990) PSII nitrogen implanted M2 tool steel for wear resistance in wood machining tools. In S. A. Meguid (ed.) Surface Engineering (Essex: Elsevier Science Publishers Ltd), pp. 198–207.
   Google Scholar
• Ramasamy, G. and Ratnasingam, J. (2010) A review of cemented tungsten carbide tool wear during wood cutting processes. Journal of Applied Sciences, 10(22), 2799–2804.
   Google Scholar
• Ratnasingam, J., Scholz, F. and Ramasamy, G. (2012) An annotated bibliography of cemented carbides as a cutting tool material. Materials Research Society, 56.
   Google Scholar
• Samsonov, G. V. and Kosolapova, T. J. (1975) Vysokotemperaturnye karbidy (Naukova Dumka).
   Google Scholar
• Sheikh-Ahmad, J. Y. and Bailey, J. A. (1999) High-temperature wear of cemented tungsten carbide tools while machining particleboard and fiberboard. Journal of Wood Science, 45(6), 445–455.
   Web of Science ®Google Scholar
• Vesnovsky, O. K. (1992) Ion implantation of cutting tools. Surface and Coatings Technology, 52(3), 297–299.
   Web of Science ®Google Scholar
• Walter, J. L., Skelly, D. W. and Minnear, W. P. (1993) Ion implantation of cobalt-tungsten carbide tools for machining titanium. Wear, 170, 79–92.
   Web of Science ®Google Scholar
• Werner, Z., Barlak, M., Dłużewski, P., Heller, R., Pisarek, M., Markov, A. and Proskurowsky, D. (2020) Crystallographic changes in electron pulse annealing of Ti-implanted GaP. Radiation Effects and Defects in Solids, 175(7-8), 1–12.
   Web of Science ®Google Scholar
• Werner, Z., Barlak, M., Grądzka-Dahlke, M., Diduszko, R., Szymczyk, W., Dąbrowski, J., Piekoszewski, J. and Borkowska, K. (2006) The effect of ion implantation on the wear of Co-Cr-Mo alloy. Vacuum, 81, 1191–1194.
   Web of Science ®Google Scholar
• Wilkowski, J. and Barlak, M. (2018) The lifetime of cemented carbide blades during wood-based panels milling. Biuletyn Informacyjny OB-RPPD, 3-4, 118–128.
   Google Scholar
• Wilkowski, J., Barlak, M., Böttger, R. and Werner, Z. (2019a) The effect of nitrogen ions separation in the implantation process of the WC-Co tools surface layer on their lifetime during chipboard milling. Biuletyn Informacyjny OB-RPPD, 3-4, 135–147.
   Google Scholar
• Wilkowski, J., Barlak, M., Böttger, R. and Werner, Z. (2019b) The effect of nitrogen ion implantation on nano-scale hardness and elastic modulus of WC-Co indexable knives for wood materials machining. Annals of WULS – SGGW, Forestry and Wood Technology, 108, 79–83.
   Google Scholar
• Wilkowski, J., Barlak, M., Werner, Z., Czarniak, P. and Wachowicz, J. (2018) The effect of the WC-Co properties on the tool wear during particleboards milling. Chip and Chipless Woodworking Processes, 11(1), 211–216.
   Google Scholar
• Wilkowski, J., Barlak, M., Werner, Z., Zagórski, J., Czarniak, P., Podziewski, P. and Szymanowski, K. (2019c) Lifetime improvement and the cutting forces in nitrogen implanted drills during wood-based material machining. Wood and Fiber Science, 51(2), 209–220.
   Web of Science ®Google Scholar
• Wilkowski, J. and Górski, J. (2011) Vibro-acoustic signals a source of information about tool wear during laminated chipboard milling. Wood Research, 56(1), 57–66.
   Web of Science ®Google Scholar
• Yeo, S. and Kim, Y. (2015) The enhancement of wear resistance for nitrogen-implanted tungsten carbide. Journal of the Korean Physical Society, 66, 474–477.
   Web of Science ®Google Scholar
• Zhang, D., Wang, H., Burks, A. R. and Cong, W. (2020) Delamination in rotary ultrasonic machining of CFRP composites: Finite element analysis and experimental implementation. The International Journal of Advanced Manufacturing Technology, 107, 3847–3858.
   Web of Science ®Google Scholar
• Web pages:
   Google Scholar
• SRIM (2020) Interactions of ions with matter. Available at: http://www.srim.org, 26.05.2020.
   Google Scholar
• SUSPRE (2020) Interactions of energetic particles. Available at: https://www.surrey.ac.uk/ion-beam-centre/research/interactions-energetic-particles, 26.05.2020.
   Google Scholar