Effects of shear deformation and orthotropy on the buckling behaviour of oriented strand boards

References

• Akrami, A., Barbu, M. C. and Fruehwald, A. (2014) Characterization of properties of oriented strand boards from beech and poplar. European Journal of Wood and Wood Products, 72, 393–398. doi:10.1007/s00107-014-0793-9
   Web of Science ®Google Scholar
• Blass, H. J. and Sandhass, C. (2017) Timber Engineering, Principles for Design. (karlsruhe: KIT Scientific Publishing).
   Google Scholar
• Böhm, M. (2009) The influence of moisture content on thickness swelling and modulus of elasticity in oriented strand board bending. Wood Research, 54, 79–90.
   Web of Science ®Google Scholar
• Chen, H. P. (1993) Transverse shear effects on buckling and postbuckling of laminated and delaminated plates. AIAA Journal, 31, 163–169. doi:10.2514/3.11333
   Web of Science ®Google Scholar
• Chen, G. and He, B. (2017) Stress-strain constitutive relation of OSB under axial loading: An experimental investigation. BioResources, 12, 6142–6156. doi:10.15376/biores.12.3.6142-6156
   Web of Science ®Google Scholar
• D’Arenzo, G., Rinaldin, G., Fossetti, M. and Fragiacomo, M. (2019) An innovative shear-tension angle bracket for cross-laminated timber structures: Experimental tests and numerical modelling. Engineering Structures, 197, 109434. doi:10.1016/j.engstruct.2019.109434
   Web of Science ®Google Scholar
• EN 12369-1:2001 (2001) Wood-based panels. Characteristic values for structural design. OSB, Particleboards and Fibreboards.
   Google Scholar
• EN 13183-1 (2002) Moisture content of a piece of sawn timber part 1: Determination by oven dry method.
   Google Scholar
• EN 789:2005-01 (2005) Determination of the mechanical properties of wood-based panels.
   Google Scholar
• Gladden, J. R., Handzy, N. Z., Belmonte, A. and Villermaux, E. (2005) Dynamic buckling and fragmentation in brittle rods. Physical Review Letters, 94, 3–6. doi:10.1103/PhysRevLett.94.035503
   Web of Science ®Google Scholar
• Lempriere, B. M. (1968) Poisson’s ratio in orthotropic materials. AIAA Journal, 6, 2226–2227. doi:10.2514/3.4974
   Web of Science ®Google Scholar
• Megson, T. H. G. (2013) Introduction to Aircraft Structural Analysis, 3rd ed. (Oxford: Elsevier Ltd).
   Google Scholar
• Pelletier, B. and Doudak, G. (2019) Investigation of the lateral-torsional buckling behaviour of engineered wood I-joists with varying end conditions. Engineering Structures, 187, 329–340. doi:10.1016/j.engstruct.2019.03.003
   Web of Science ®Google Scholar
• Plenzler, R., Ludwiczak-Niewiadomska, L. and Strzeleck, P. (2017) Elastic and strength properties of OSB layers. Drvna Industrija, 68, 3–9. doi:10.5552/drind.2017.1521
   Web of Science ®Google Scholar
• Saliklis, E. P. and Mussen, A. L. (2000) Investigating the buckling behavior of OSB panels. Wood and Fiber Science, 32, 259–268.
   Web of Science ®Google Scholar
• Schnabl, S. and Planinc, I. (2011) The effect of transverse shear deformation on the buckling of two-layer composite columns with interlayer slip. International Journal of Non-linear Mechanics, 46, 543–553. doi:10.1016/j.ijnonlinmec.2011.01.001
   Web of Science ®Google Scholar
• St-Amour, R. and Doudak, G. (2018) Experimental and numerical investigation of lateral torsional buckling of wood I-joists. Canadian Journal of Civil Engineering, 45, 41–50. doi:10.1139/cjce-2017-0281
   Web of Science ®Google Scholar
• Steidl, C. M., Wang, S., Bennett, R. M. and Winistorfer, P. M. (2003) Tensile and compression properties through the thickness of oriented strandboard. For Prod J, 53, 72–80.
   Web of Science ®Google Scholar
• Thelandersson, S., Larsen, H. J., Johansson, C.-J., et al. (2003) Timber Engineering (West Sussex: John Wiley & Sons, LTD).
   Google Scholar
• Thomas, W. H. (2002) Shear and flexural deflection equations for OSB floor decking with point load. Holz als Roh - und Werkst, 60, 175–180. doi:10.1007/s00107-001-0279-4
   Google Scholar
• Thomas, W. H. (2003) Poisson’s ratios of an oriented strand board. Wood Science and Technology, 37, 259–268. doi:10.1007/s00226-003-0171-y
   Web of Science ®Google Scholar
• Thomas, W. H. (2004) Planar shear moduli of rigidity of an oriented strand board from bending and shear tests. Mater Struct Constr, 37, 480–484. doi:10.1617/13929
   Web of Science ®Google Scholar
• Timoshenko, S. and Gere, J. (1963) Theory of Elastic Stability, 2nd ed. (New York: McGraw Hill).
   Google Scholar
• Xiao, Q., Doudak, G. and Mohareb, M. (2017) Numerical and experimental investigation of lateral torsional buckling of wood beams. Engineering Structures, 151, 85–92. doi:10.1016/j.engstruct.2017.08.020
   Web of Science ®Google Scholar
• Zhang, Z., Zhang, W., Zhai, Z. J., et al. (2011) Evaluation of various turbulence models in predicting airflow and turbulence in enclosed environments by CFD : part 2 — comparison with experimental data from literature. HVAC&R Research, 9669, 37–41.
   Google Scholar
• Zhu, E. C., Guan, Z. W., Rodd, P. D. and Pope, D. J. (2005a) Buckling of oriented strand board webbed wood I-joists. J Struct Eng ·, 131, 1629–1636. doi:10.1061/(ASCE)0733-9445(2005)131:10(1629)
   Web of Science ®Google Scholar
• Zhu, E. C., Guan, Z. W., Rodd, P. D. and Pope, D. J. (2005b) Finite element modelling of OSB webbed timber I-beams with interactions between openings. Advances in Engineering Software (Barking, London, England, 36, 797–805. doi:10.1016/j.advengsoft.2005.03.027
   Web of Science ®Google Scholar