Innovation of helical cutting tool edge for eco-friendly milling of wood-based materials

References

• Abrao, A. M., Faria, P. E., Rubio, J. C., Reis, P. and Davim, J. P. (2007) Drilling of fiber reinforced plastics: A review. Journal of Materials Processing Technology, 186, 1–7.
   Web of Science ®Google Scholar
• American Conference of Governmental Industrial Hygienists [ACGIH] (2012) Threshold Limit Values and Biological Exposure Indices (Cincinnati, OH: ACGIH), 1130 p.
   Google Scholar
• ASTM International (2005) Standard Test Methods for Small Clear Specimens of Timber. ASTM D143-94. In: Annual Book of ASTM Standard (Philadelphia, PA: ASTM International), 31 p.
   Google Scholar
• BSI (1957) Methods of Testing Small Clear Specimens of Timber. BS 373:1957 (London: BSI), 32 p.
   Google Scholar
• Chen, W. F. and Lai, H. Y. (2002) A comprehensive engineering model for the design, manufacture and assembly of helical carpenter shapers. Journal of Engineering Manufacture, 216, 1493–1504.
   Google Scholar
• Cleverson, P., Manoel, C. S. A. and Simone, S. A. (2015) Moisture content and its influence on the roughness and noise emission during wood machining. Advanced Materials Research, 1088, 680–685.
   Google Scholar
• Cyra, G., Tanaka, C., Yoshinobu, M. and Nishino, Y. (1998) Effects of helical angle of router bit on acoustic emission. Journal of Wood Science, 44, 169–176.
   Web of Science ®Google Scholar
• Darmawan, W., Azhari, M., Rahayu, I. S., Nandika, D., Dumasari, L., Malela, I. and Nishio, S. (2018) The chips generated during up-milling and down-milling of pine wood by helical router bits. Journal of the Indian Academy of Wood Science, 15, 172–180.
   Web of Science ®Google Scholar
• Darmawan, W., Gottloeber, C., Oertel, M., Wagenfueher, A. and Fischer, R. (2011) Performance of helical edge milling cutters in planing wood. European Journal of Wood and Wood Products, 69(4), 565–572.
   Web of Science ®Google Scholar
• Darmawan, W., Quesada, J., Rossi, F., Marchal, R., Machi, F. and Usuki, H. (2009) Improvement in wear characteristics of the AISI M2 by laser cladding and melting. Journal of Laser Applications, 21(4), 176–182.
   Web of Science ®Google Scholar
• Darmawan, W., Rahayu, I. S., Tanaka, C. and Marchal, R. (2006) Chemical and mechanical wearing of high speed steel and tungsten carbide tools by tropical woods. Journal of Tropical Forest Science, 18(4), 166–172.
   Web of Science ®Google Scholar
• Darmawan, W., Usuki, H., Quesada, J. and Marchal, R. (2008) Clearance wear and normal force of TiN-coated P30 in cutting hardboards and wood-chip cementboards. Holz als Roh- und Werkstoff, 66(2), 88–97.
   Google Scholar
• Davim, J. P. (2011) Wood Machining (London: ISTE-Wiley), 275 p.
   Google Scholar
• Davim, J. P., Clemente, V. and Silva, S. (2007a) Evaluation of delamination in drilling medium density fibreboard. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 221(4), 655–658.
   Web of Science ®Google Scholar
• Davim, J. P., Clemente, V. and Silva, S. (2009) Surface roughness aspects in milling MDF (medium density fibreboard). The International Journal of Advanced Manufacturing Technology, 40, 49–55.
   Web of Science ®Google Scholar
• Davim, J. P., Gaitonde, V. N. and Karnik, S. R. (2008) An investigative study of delamination in drilling of medium density fibreboard (MDF) using response surface models. The International Journal of Advanced Manufacturing Technology, 37(1–2), 49–57.
   Web of Science ®Google Scholar
• Davim, J. P., Rubio, J. C. and Abrao, A. M. (2007b) Delamination assessment after drilling medium-density fibreboard (MDF) by digital image analysis. Holzforschung, 61(3), 294–300.
   Web of Science ®Google Scholar
• Gaitonde, V. N., Karnik, S. R. and Davim, J. P. (2008a) Taguchi multiple-performance characteristics optimization in drilling of medium density fibreboard (MDF) to minimize delamination using utility concept. Journal of Materials Processing Technology, 196(1–3), 73–78.
   Web of Science ®Google Scholar
• Gaitonde, V. N., Karnik, S. R. and Davim, J. P. (2008b) Prediction and optimization of surface roughness in milling of medium density fiberboard (MDF) based on Taguchi orthogonal array experiments. Holzforschung, 62(2), 209–214.
   Web of Science ®Google Scholar
• Heisel, U., Niemeyer, W. and Weiss, E. (1993) Lärm- und staubarmer Fräsprozeß mit wendelförmigen Schneiden. HOB Die Holzbearbeitung, 5, 90–98.
   Google Scholar
• Ibach, R., Gnatowski, M., Sun, G., Glaeser, J., Leung, M. and Haight, J. (2018) Laboratory and environmental decay of wood–plastic composite boards, flexural properties. Wood Material Science & Engineering, 13(2), 81–96.
   Web of Science ®Google Scholar
• Kang, M., Zhang, L. and Tang, W. (2020) Modeling of the distribution of undeformed chip thicknessbased on the real interference depth of the active abrasive grain. IEEE Access, 8, 101628–101647.
   Web of Science ®Google Scholar
• Mann, B. P., Insperger, T., Bayly, P. V. and Stépán, G. (2003) Stability of up-milling and down-milling, part 2, experimental verification. International Journal of Machine Tools and Manufacture, 43(1), 35–40.
   Web of Science ®Google Scholar
• Martikka, O., Huuhilo, T., Butylina, S. and Kärki, T. (2012) The effect of mineral fillers on the thermal properties of wood-plastic composites. Wood Material Science and Engineering, 7(2), 107–114.
   Google Scholar
• Masoudifar, M., Nosrati, B. and Gargari, R. M. (2018) Effect of surface treatment and titanium dioxide nanoparticles on the mechanical and morphological properties of wood flour/polypropylene nanocomposites. International Wood Products Journal, 9(4), 176–185.
   Web of Science ®Google Scholar
• Niska, K. O. and Sain, M. (2008) Wood-Polymer Composites (New York, US: CRC Press), 384 p.
   Google Scholar
• Novayer, A., Wahyudi, I., Setiono, L. and Darmawan, W. (2020) The influence of helix angle of router bits on chip flow, roughness and noise level in milling different grain angle orientation of teak wood. International Wood Products Journal.
   Web of Science ®Google Scholar
• Ozoegwu, C. G., Omenyi, S. N., Ofochebe, S. M. and Achebe, C. H. (2013) Comparing up and down milling modes of end-milling using temporal finite element analysis. Applied Mathematics, 3(1), 1–11.
   Google Scholar
• Pangestu, K. T. P., Darmawan, W., Nandika, D. and Usuki, H. (2019) Cutting performance of multilayer coated tungsten carbide in milling of wood composites. International Wood Products Journal, 10(2), 78–85.
   Web of Science ®Google Scholar
• Su, W. C. and Wang, Y. (2002) Effect of the helix angle of router bits on chip formation and energy consumption during milling of solid wood. Journal of Wood Science, 48, 126–131.
   Web of Science ®Google Scholar
• Su, W. C., Wang, Y., Zhu, N. and Tanaka, C. (2003) Effect of tool angles on the chips generated during milling wood by straight router-bits. Journal of Wood Science, 49, 271–274.
   Web of Science ®Google Scholar
• Technical Association of the Pulp and Paper Industry [TAPPI] (2002) Tappi Test Methods, Ash in Wood and Pulp (T211 om-02) (Atlanta, GA: Tappi Press), 5 p.
   Google Scholar