Cutting force analysis of oak for the development of a cutting force model

References

• Atkins, A. G. (2003) Modelling metal cutting using modern ductile fracture mechanics: quantitative explanations for some longstanding problems. International Journal of Mechanical Sciences, 45(2), 373–396.
   Web of Science ®Google Scholar
• Axelsson, B. O. M. (1994) Lateral cutting force during machining of wood due to momentary disturbances in the wood structure and degree of wear of the cutting tool. Holz als Roh- und Werkstoff, 52(3), 198–204.
   Google Scholar
• Axelsson, B. O. M., Lundberg, ÅS and Grönlund, J. A. (1993) Studies of the main cutting force at and near a cutting edge. Holz als Roh- und Werkstoff, 51(2), 43–48.
   Google Scholar
• Brabec, M., Hlaskova, L., Tippner, J., Sebek, F., Krejci, P., Kubik, P., Frybort, S., Krenke, T. and Dvoracek, O. (2018) Je dřevařský průmysl připraven na využití tvrdých listnatých dřev v materiálech na bázi dřeva? Stavebni Partner, VII(1), 49–53.
   Google Scholar
• Budynas, R. G., Nisbett, J. K. and Shigley, J. E. (2011) Shigley’s Mechanical Engineering Design (9th ed). New York: McGraw-Hill).
   Google Scholar
• Dvoracek, O., Lechowicz, D., Krenke, T., Möseler, B., Tippner, J., Haas, F., Emsenhuber, G. and Frybort, S. (2021) Development of a novel device for analysis of high-speed cutting processes considering the influence of dynamic factors. The International Journal of Advanced Manufacturing Technology, 113, 1685–1697. doi:10.1007/s00170-021-06769-1.
   Web of Science ®Google Scholar
• Ettelt, B. and Gittel, H.-J. (2004) Sägen, Fräsen, Hobeln, Bohren – Die Spanung von Holz und ihre Werkzeuge. 2. release. Leinfelden-Echterdingen: DRW-Verlag.
   Google Scholar
• Franz, N. (1958) An Analysis of the Wood-Cutting Process (Ann Arbor, MI: University of Michigan Press).
   Google Scholar
• Goli, G., Bléron, L., Marchal, R., Uzielli, L. and Negri, M. (2002) Measurement of cutting forces, in routing wood at various grain angles. initial results with Douglas Fir. Wood Science and Engineering in the Third Millennium, January, 123–130.
   Google Scholar
• Gonçalves, R. and Néri, A. C. (2005) Orthogonal cutting forces in juvenile and mature Pinus taeda wood. Scientia Agricola, 62(4), 310–318.
   Web of Science ®Google Scholar
• Gottlöber, C. (2014) Zerspanung von Holz und Holzwerkstoffen. In Zerspanung von Holz und Holzwerkstoffen (München: Carl Hanser Verlag GmbH & Co. KG), pp. 1–9. Carl Hanser Verlag.
   Google Scholar
• Gottlöber, C. and Wagenführ, A. (2019) Modelling of wood machining processes with artificial neural networks. 24th International Wood Machining Seminar, Corvallis, OR, USA, 24, 297–306.
   Google Scholar
• HARDIS | Hardwood Disintegration, 2020.
   Google Scholar
• HBM Prenscia Inc. (1992) Characteristics of the Weibull Distribution [online]. Available from: https://www.weibull.com/hotwire/issue14/relbasics14.htm.
   Google Scholar
• Hlásková, L., Kopecký, Z. and Novák, V. (2020) Influence of wood modification on cutting force, specific cutting resistance and fracture parameters during the sawing process using circular sawing machine. European Journal of Wood and Wood Products, 78(6), 1173–1182.
   Web of Science ®Google Scholar
• Ikawa, N., Shimada, S. and Tanaka, H. (1992) Minimum thickness of cut in micromachining. Nanotechnology, 3(1), 6–9.
   Google Scholar
• Kivimaa, E. (1950) Cutting force in woodworking. The State Institute for Technical Research, 18, 101.
   Google Scholar
• Kivimaa, E. (1952) Die Schnittkraft in der Holzbearbeitung. Holz als Roh- und Werkstoff1, 10(3), 94–108.
   Google Scholar
• Kopecký, Z., Hlásková, L. and Orlowski, K. (2014) An innovative approach to prediction energetic effects of wood cutting process with circular-saw blades. Wood Research, 59(5), 827–834.
   Web of Science ®Google Scholar
• Krenke, T., Frybort, S. and Müller, U. (2018) Cutting force analysis of a linear cutting process of spruce. Wood Material Science and Engineering, 13(5), 279–285.
   Web of Science ®Google Scholar
• Liu, Z., Shi, Z. and Wan, Y. (2013) Definition and determination of the minimum uncut chip thickness of microcutting. International Journal of Advanced Manufacturing Technology, 69(5–8), 1219–1232.
   Web of Science ®Google Scholar
• Marchal, R., Mothe, F., Denaud, L. E., Thibaut, B. and Bleron, L. (2009) Cutting forces in wood machining - basics and applications in industrial processes. A review. COST action E35 2004-2008: wood machining - micromechanics and fracture. Holzforschung, 63(2), 157–167.
   Web of Science ®Google Scholar
• McKenzie, W. M. (1960) Fundamental aspects of the woodcutting process. Forest Products Journal, 10(9), 447–456.
   Google Scholar
• Merchant, M. E. (1945) Mechanics of the metal cutting process. I. orthogonal cutting and a type 2 chip. Journal of Applied Physics, 16(5), 267–275.
   Web of Science ®Google Scholar
• Mothe, F. (1988) Aptitude au déroulage du bois de douglas : conséquences de l’hétérogénéité du bois sur la qualité des placages. INPL PhD Thesis, 173.
   Google Scholar
• Naylor, A. and Hackney, P. (2013) A review of wood machining literature with a special focus on sawing. BioResources, 8(2), 3122–3135.
   Web of Science ®Google Scholar
• Naylor, A., Hackney, P., Petera, N. and Clahr, E. (2010) A predictive model for the cutting force in wood machining developed using mechanical properties. BioResources, 7(3), 2883–2894.
   Web of Science ®Google Scholar
• Orlowski, K., Ochrymiuk, T. and Atkins, A. (2010) Specific cutting resistance while sawing of wood - the size effect. Annals of Warsaw University of Life Sciences - SGGW. Forestry and Wood Technology, 72(72), 103–107.
   Google Scholar
• Orlowski, K. A., Ochrymiuk, T., Hlaskova, L., Chuchala, D. and Kopecky, Z. (2020) Revisiting the estimation of cutting power with different energetic methods while sawing soft and hard woods on the circular sawing machine: a central European case. Wood Science and Technology, 54(2), 457–477.
   Web of Science ®Google Scholar
• Porankiewicz, B., Axelsson, B., Grönlund, A. and Marklund, B. (2011) Main and normal cutting forces by machining wood of Pinus sylvestris. Bioresources, 6(4), 3687–3713.
   Web of Science ®Google Scholar
• Roland, K. (1988) Wissensspeicher Holztechnik – Grundlagen. 2. Release (Leipzig: Fachbuchverlag).
   Google Scholar
• Shaw, M. C. (2003) The size effect in metal cutting. Sadhana - Academy Proceedings in Engineering Sciences, 28(5), 875–896.
   Web of Science ®Google Scholar
• Vazquez-Cooz, I. and Meyer, R. W. (2003) Cutting forces for tension wood and normal wood of maple. In: XII World Forestry Congress, Québec City, Canada.
   Google Scholar
• Vazquez-Cooz, I. and Meyer, R. W. (2006) Cutting forces for tension and normal wood of maple. Forest Products Journal, 56(4), 26–34.
   Web of Science ®Google Scholar
• Weibull, W. (1951) A statistical distribution function of wide applicability. Journal of Applied Mechanics, 18, 293–297.
   Web of Science ®Google Scholar