299
Views
4
CrossRef citations to date
0
Altmetric
Original Articles

Wood quality of Khaya senegalensis trees from a multi-stratified agroforestry system established in an open ombrophilous forest zone

ORCID Icon, , ORCID Icon, , & ORCID Icon
Pages 858-867 | Received 17 Mar 2021, Accepted 11 Aug 2021, Published online: 27 Aug 2021

References

  • Abdelgaleil, S. A., Hashinaga, F. and Nakatani, M. (2005) Antifungal activity of limonoids from Khaya ivorensis. Pest Management Science, 61(2), 186–190.
  • ABNT (2003a) NBR 14660, Wood Sampling and Preparation for Analysis (Rio de Janeiro: ABNT).
  • ABNT (2003b) NBR 14853, Wood Determination of Material Soluble in Ethanol-Toluene and Dichloromethane (Rio de Janeiro: ABNT).
  • ABNT (2003c) NBR 7989, Cellulosic Pulp and Wood Determination of Acid-Insoluble Lignin (Rio de Janeiro: ABNT).
  • ABNT (2003d) NBR 13999, Paper, Cardboard, Cellulose Pulp, and Wood - Determination of the Residue (Gray) After Incineration at 525 °C (Rio de Janeiro: ABNT).
  • Ahvenainen, P. (2019) Anatomy and mechanical properties of woods used in electric guitars. IAWA Journal, 40(1), 106–1S6.
  • Alinoori, F., Moshiri, F., Sharafi, P. and Samali, B. (2020) Reinforcement methods for compression perpendicular to grain in top/bottom plates of light timber frames. Construction and Building Materials, 231, 116377.
  • Almeida, J. P. B., Aquino, V. B. M., Wolenski, A. R. V., Campos, C. I., Molina, J. C., Chahud, E., Lahr, F. A. R. and Christoforo, A. L. (2020) Analysis of relations between the moduli of elasticity in compression, tension, and static bending of hardwoods. BioResources, 15(2), 3278–3288.
  • Alvares, C. A., Stape, J. L., Sentelhas, P. C., Gonçalves, J. L. M. and Sparovek, G. (2014) Köppen’s climate classification map for Brazil. Meteorologische Zeitschrift, 22(6), 711–728.
  • Alves, R. M., Chaves, S. F. S. and Bastos, A. J. R. (2020) Viability of the use of african mahogany with cupuassu tree in agroforestry system (AFS). Revista Árvore, 44, e4407.
  • Andrade, A. C. A., Silva, J. R. M., Moulin, J. C., Oliveira, M. B., Souza, M. T. and Lima, C. L. (2018) Quality of machined surfaces and specific cutting energy in wood of two African mahogany species. Scientia Forestalis, 46(120), 532–539.
  • Ansell, M. P. (2011) Wood—A 45th anniversary review of JMS papers. Part 1: The wood cell wall and mechanical properties. Journal of Materials Science, 46, 7357–7368.
  • Appiah-Kubi, E., Kankam, C. K., Frimpong-Mensah, K. and Opuni-Frimpong, E. (2016) The bending strength and modulus of elasticity properties of plantation-grown Khaya ivorensis (African Mahogany) from Ghana. Journal of the Indian Academy of Wood Science, 13(1), 48–54.
  • Araújo, S. O., Vital, B. R., Oliveira, B., Carneiro, A. C. O., Lourenço, A. and Pereira, H. (2016) Physical and mechanical properties of heat treated wood from Aspidosperma populifolium, Dipteryx odorata and Mimosa scabrella. Maderas. Ciencia y Tecnología, 18(1), 143–156.
  • Arévalo, R. and Hernández, R. E. (2001) Influence of moisture sorption on swelling of Mahogany (Swietenia macrophylla King) wood. Holzforschung, 55, 590–594.
  • ASTM (2014) ASTM D 143, Standard Test Methods for Small Clear Specimens of Timber (West Conshohocken, PA: ASTM International).
  • ASTM (2017) ASTM D 5536, Standard Practice for Sampling Forest Trees for Determination of Clear Wood Properties. (West Conshohocken, PA: ASTM International).
  • Athomo, A. B. B., Anris, S. P. E., Tchiama, R. S., Santiago-Medina, F. J., Cabaret, T., Pizzi, A. and Charrier, B. (2018) Chemical composition of African mahogany (K. ivorensis A. Chev.) extractive and tannin structures of the bark by MALDI-TOF. Industrial Crops and Products, 113, 167–178.
  • Athomo, A. B. B., Anris, S. P. E., Tchiama, R. S., Pizzi, L. L. A. and Charrier, B. (2020) Chemical analysis and thermal stability of African mahogany (Khaya ivorensis A. Chev) condensed tannins. Holzforschung, 74(7), 683–701.
  • Bennett, B. C. (2016) The sound of trees: Wood selection in guitars and other chordophones. Economic Botany, 70(1), 49–63.
  • Bhat, K. M. and Priya, P. B. (2004) Influence of provenance variation on wood properties of teak from the western Ghat region in India. IAWA Journal, 25(3), 273–282.
  • Bradbury, G. J., Potts, B. M. and Beadle, C. L. (2011) Genetic and environmental variation in wood properties of Acacia melanoxylon. Annals of Forest Science, 68, 1363–1373.
  • Brennan, G. K. and Radomiljac, A. M. (1998) Preliminary observations on the utilization and wood properties of plantation teak (Tectona grandis) and African mahogany (Khaya senegalensis) grown near Kununurra, Western Australia. Australian Forestry, 61(2), 120–126.
  • Burcham, D. C., Wong, J. Y., Ali, M. I. M., Abarrientos Junior, N. V., Fong, Y. K. and Schwarze, F. W. M. R. (2015) Characterization of host-fungus interactions among wood decay fungi associate with Khaya senegalensis (Desr.) A. Juss (Meliaceae) in Singapore. Forest Pathology, 45(6), 492–504.
  • Bush, D., Harwood, C. and Pinkard, E. (2018) Species for changing climates – Australian dryland forestry opportunities. Australian Forestry, 81(2), 102–115.
  • Câmara, A. P., Vidaurre, G. B., Oliveira, J. C. L., Picoli, E. A. T., Almeida, M. N. F., Roque, R. M., Tomazello Filho, M., Souza, H. J. P., Oliveira, T. R. and Campoe, O. C. (2020) Changes in hydraulic architecture across a water availability gradient for two contrasting commercial Eucalyptus clones. Forest Ecology and Management, 474, 118380.
  • Carneiro, J. S., Emmert, L., Sternadt, G. H., Mendes, J. C. and Almeida, G. F. (2009) Decay susceptibility of Amazon wood species from Brazil against white rot and brown rot decay fungi. Holzforschung, 63, 767–772.
  • Cavalli, A., Cibecchini, D., Togni, M. and Sousa, H. S. (2016) A review on the mechanical properties of aged wood and salvaged timber. Construction and Building Materials, 114, 681–687.
  • Chaikaew, P., Adeyemi, O., Hamilton, A. O. and Clifford, O. (2020) Spatial characteristics and economic value of threatened species (Khaya ivorensis). Scientific Reports, 10, 6266.
  • Charbonnier, F., Maire, G. L., Dreyer, E., Casanoves, F., Christina, M., Dauzat, J., Eitel, J. U. H., Vaast, P., Vierling, L. A. and Roupsard, O. (2013) Competition for light in heterogeneous canopies: Application of MAESTRA to a coffee (Coffea arabica L.) agroforestry system. Agricultural and Forest Meteorology, 181, 152–169.
  • Christoforo, A. L., Almeida, A. S., Lanini, T. L. S., Nogueira, R. S. and Lahr, F. A. R. (2019) Estimation of the characteristic value of wood strength. Engenharia Agrícola, 39(1), 127–132.
  • Christoforo, A. L., Aquino, V. B., Govone, J. S., Dias, A. M. P. G., Panzera, T. H. and Lahr, F. A. R. (2020) Alternative model to determine the characteristic strength value of wood in the compression parallel to the grain. Maderas. Ciencia y Tecnología, 22(3), 281–290.
  • Colares, C. J. G., Pastore, T. C. M., Coradin, V. T. R., Marques, L. F., Moreira, A. C. O., Alexandrino, G. L., Poppi, R. J. and Braga, J. W. B. (2016) Near infrared hyperspectral imaging and MCR-ALS applied for mapping chemical composition of the wood specie Swietenia macrophylla King (Mahogany) at microscopic level. Microchemical Journal, 124, 356–363.
  • Conrad, M. P. C., Smith, G. D. and Fernlund, G. (2003) Fracture of solid wood: A review of structure and properties at different length scales. Wood and Fiber Science, 35(4), 570–584.
  • Corrêa, F. L. O., Ramos, J. D., Gama-Rodrigues, A. C. and Müller, M. W. (2006) Produção de serapilheira em sistema agroflorestal multiestratificado no estado de Rondônia, Brasil. Ciência e Agrotecnologia, 30(6), 1099–1105.
  • Curtis, R. O. and Marshall, D. D. (2000) Why quadratic mean diameter? Western Journal of Applied Forestry, 15(3), 137–139.
  • Downes, G. M. and Drew, D. (2008) Climate and growth influences on wood formation and utilisation. Southern Forests, 70(2), 155–167.
  • Downes, G. M., Drew, D., Battaglia, M. and Schulze, D. (2009) Measuring and modelling stem growth and wood formation: An overview. Dendrochronologia, 27, 147–157.
  • Elaieb, M. T., Shel, F., Jalleli, M., Langbour, P. and Candelier, K. (2019) Physical properties of four ring-porous hardwood species: Influence of wood rays on tangential and radial wood shrinkage. Madera y Bosques, 25(2), e12521695.
  • ElAmin, E. E. and Mahmoud, A. E. (2015) Effect of air drying, solar-assisted air drying and sticker thickness on mahogany (Khaya senegalensis) wood. Forest Research, 4(3), 1000146.
  • Ferreira, D. (2019) Sisvar: A computer analysis system to fixed effects split plot type designs. Revista Brasileira de Biometria, 37(4), 529–535.
  • Ferreira, M. D., Melo, R. R., Tonini, H., Pimenta, A. S., Gatto, D. A., Beltrame, R. and Stangerlin, D. M. (2020) Physical–mechanical properties of wood from a eucalyptus clone planted in an integrated crop-livestock-forest system. International Wood Products Journal, 11(1), 12–19.
  • Fonweban, J., Mavrou, I., Gardiner, B. and Macdonald, E. (2013) Modelling the effect of spacing and site exposure on spiral grain angle on Sitka spruce (Picea sitchensis (Bong.) Carr.) in Northern Britain. Forestry, 86(3), 331–342.
  • França, T. S. F. A. (2014) Caracterização tecnológica das madeiras de duas espécies de mogno africano (Khaya ivorensis A. Chev. e Khaya senegalensis (Desr.) A. Juss. Master Thesis. Federal University of Espírito Santo.
  • França, T. S. F. A., Arantes, M. D. C., Paes, J. B., Vidaurre, G. B., Oliveira, J. T. S. and Baraúna, E. E. P. (2015) Características anatômicas e propriedades físico-mecânicas das madeiras de duas espécies de mogno africano. Cerne, 21(4), 633–640.
  • França, T. S. F. A., França, F. J. N., Arango, R. A., Woodward, B. M. and Arantes, M. D. C. (2016) Natural resistance of plantation grown African mahogany (Khaya ivorensis and Khaya senegalensis) from Brazil to wood-rot fungi and subterranean termites. International Biodeterioration & Biodegradation, 107, 88–91.
  • Freitas, T. P., Oliveira, J. T. S., Vidaurre, G. B. and Rodrigues, B. P. (2018) Environmental effect on chemical composition of Eucalyptus clones wood for pulp production. Cerne, 24(3), 219–224.
  • Fromm, J. (2012) Basic processes of wood formation. In J. Fromm (ed.), Cellular Aspects of Wood Formation (Heidelberg: Springer), pp. 3–15.
  • Gérard, J., Guibal, D., Paradis, S. and Cerre, J. C. (2017) Tropical Timber Atlas: Technological Characteristics an Uses (Yokohama: ITTO).
  • Gérard, J., Paradis, S. and Thibaut, B. (2019) Survey on the chemical composition of several tropical wood species. Bois et Forêts des Tropiques, 342, 79–91.
  • Gibson, C. and Warren, A. (2016) Resource-sensitive global production networks: Reconfigured geographies of timber and acoustic guitar manufacturing. Economic Geography, 92(4), 430–454.
  • Gierlinger, N. and Wimmer, R. (2004) Radial distribution of heartwood extractives and lignin in mature European larch. Wood and Fiber Science, 36(3), 387–394.
  • Hein, P. R. G., Chaix, G., Clair, B., Brancheriau, L. and Gril, J. (2016) Spatial variation of wood density, stiffness and microfibril angle along Eucalyptus trunks grown under contrasting growth conditions. Trees, 30, 871–882.
  • Hein, P. R. G. and Lima, J. T. (2012) Relationships between microfibril angle, modulus of elasticity and compressive strength in Eucalyptus wood. Maderas. Ciencia y Tecnología, 14(3), 2012.
  • Hein, P. R. G. and Brancheriau, L. (2018) Comparison between three-point and four-point flexural tests to determine wood strength of Eucalyptus specimens. Maderas. Ciencia y Tecnología, 20(3), 333–342.
  • Hillis, W. E. (1971) Distribution, properties and formation of some wood extractives. Wood Science and Technology, 5, 272–289.
  • Jankowska, A., Drozdzek, M., Sarnowski, P. and Horodenski, J. (2017) Effect of extractives on the equilibrium moisture content and shrinkage of selected tropical wood species. BioResources, 12(1), 597–607.
  • Jahan, M. S., Rahman, M. M. and Ni, Y. (2021) Alternative initiatives for non-wood chemical pulping and integration with the biorefinery concept: A review. Biofuels, Bioproducts and Biorefining, 15(1), 100–118.
  • Khalid, S. A., Friedrichsen, G. M., Kharazmi, A., Theander, T. G., Olsen, C. E. and Christensen, S. B. (1998) Limonoids from Khaya senegalensis. Phytochemistry, 49(6), 1769–1772.
  • Kránitz, K., Sonderegger, W., Bues, C. T. and Niemz, P. (2016) Effects of aging on wood: A literature review. Wood Science and Technology, 50, 7–22.
  • Leonardon, M., Altaner, C. M., Vihermaa, L. and Jarvis, M. C. (2010) Wood shrinkage: Influence of anatomy, cell wall architecture, chemical composition and cambial age. European Journal of Wood and Wood Products, 68, 87–94.
  • Mania, P., Wróblewski, M., Wójciak, A., Roszyk, E. and Moliński, W. (2020) Hardness of densified wood in relation to changed chemical composition. Forests, 11(5), 506.
  • Mardsen, C., Martin-Chave, A., Cortet, J., Hedde, M. and Capowiez, Y. (2019) How agroforestry systems influence soil fauna and their functions – A review. Plant and Soil, 453, 29–44.
  • Mascarenhas, A. R. P., Sccoti, M. S. V., Melo, R. R., Corrêa, F. L. O., Souza, E. F. M., Andrade, R. A., Bergamin, A. C. and Müller, M. W. (2017) Atributos físicos e estoques de carbono do solo sob diferentes usos da terra em Rondônia, Amazônia Sul-Ocidental. Pesquisa Florestal Brasileira, 37(89), 19–27.
  • Mohd-Jamil, A. W. and Khairul, M. (2017) Variations of mechanical properties in plantation timbers of jelutong (Dyera costulata) and Khaya (Khaya ivorensis) along the radial and vertical positions. Journal of Tropical Forest Science, 29(1), 114–120.
  • Moya, R. and Muñoz, F. (2010) Physical and mechanical properties of eight fast-growing plantation species in Costa Rica. Journal of Tropical Forest Science, 22(3), 317–328.
  • Moya, R., Bond, B. and Quesada, H. (2014) A review of heartwood properties of Tectona grandis trees from fast-growth plantations. Wood Science and Technology, 48, 411–433.
  • Nasir, V. and Cool, J. (2020) A review on wood machining: Characterization, optimization, and monitoring of the sawing process. Wood Material Science & Engineering, 15(1), 1–16.
  • Nordahlia, A. S., Hamdan, H. and Anwar, U. M. K. (2013) Wood properties of selected plantation species: Khaya ivorensis (african mahogany), Azadirachta excelsa (sentang), Endospermum malaccense (sesendok) and Acacia mangium. Timber Technology Bulletin, 51, 1–8.
  • Olatunji, T. L., Odebunmi, C. A. and Adetunji, A. E. (2021) Biological activities of limonoids in the Genus Khaya (Meliaceae): A review. Future Journal of Pharmaceutical Sciences, 7(74), 1–16.
  • Oliveira, X. M., Ribeiro, A., Ferraz Filho, A. C., Mayrinck, R. C., Lima, R. and Scolforo, J. R. S. (2018) Volume equations for Khaya ivorensis A. Chev. plantations in Brazil. Anais da Academia Brasileira de Ciências, 90(4), 3285–3298.
  • Pantera, A., Burgess, P. J., Losada, M. R., Moreno, G., López-Díaz, M. L., Corroyer, N., McAdam, J., Rosati, A., Papadopoulos, A. M., Graves, A., Rodríguez, A. R., Ferreiro-Domínguez, N., Fernández Lorenzo, J. L., González-Hernández, M. P., Papanastasis, V. P., Mantzanas, K., Lerberghe, P. V. and Malignier, N. (2018) Agroforestry for high value tree systems in Europe. Agroforestry Systems, 92, 945–959.
  • Poku, K., Wu, Q. and Vlosky, R. (2001) Wood properties and their variations within the tree stem of lesser-used species of tropical hardwood from Ghana. Wood and Fiber Science, 32(2), 284–291.
  • Pretzsch, H. and Rais, A. (2016) Wood quality in complex forests versus even-aged monocultures: Review and perspectives. Wood Science and Technology, 50, 845–880.
  • Reis, J. C., Rodrigues, G. S., Barros, I., Rodrigues, R. A. R., Garret, R. D., Valentim, J. F., Kamoi, M. Y. T., Michetti, M., Wruck, F. J., Rodrigues-Filho, S., Pimentel, P. E. O. and Smukler, S. (2021) Integrated crop-livestock system: A sustainable land-use alternative for food production in the Brazilian Cerrado and Amazon. Journal of Cleaner Production, 283, 124580.
  • Rizanti, D. E., Darmawan, W., George, B., Merlin, A., Dumarcay, S., Chapuis, H., Gérardin, C., Gelhaye, E., Raharivelomanana, P., Sari, R. K., Syafii, W., Mohamed, R. and Gerardin, P. (2018) Comparison of teak wood properties according to forest management: Short versus long rotation. Annals of Forest Science, 75, 39.
  • Rocha, M. F. V., Veiga, T. R. L. A., Soares, B. C. D., Araújo, A. C. C., Carvalho, A. M. M. and Hein, P. R. H. (2019) Do the growing conditions of trees influence the wood properties? Floresta e Ambiente, 26(3), e20180353.
  • Rocha, S. M. G., Vidaurre, G. B., Pezzopane, J. E. M., Almeida, M. N. F., Carneiro, R. L., Campoe, O. C., Scolforo, H. F., Alvares, C. A., Neves, J. C. L., Xavier, A. C. and Figura, M. A. (2020) Influence of climatic variations on production, biomass and density of wood in Eucalyptus clones of different species. Forest Ecology and Management, 473(1), 118290.
  • Ruffinatto, F., Crivellaro, A. and Wiedenhoeft, A. C. (2015) Review of macroscopic features for hardwood and softwood identification and a proposal for a new character list. IAWA Journal, 36(2), 208–241.
  • Sahin, C. K. and Onay, B. (2020) Alternative wood species for playgrounds wood from fruit trees. Wood Research, 65(1), 149–160.
  • Santana, M. A. E. and Okino, E. Y. A. (2007) Chemical composition of 36 Brazilian Amazon forest wood species. Holzforschung, 61, 469–477.
  • Santos, F. M., Terra, G., Chaer, G. M. and Monte, M. A. (2019) Modeling the height–diameter relationship and volume of young African mahoganies established in successional agroforestry systems in northeastern Brazil. New Forests, 50, 389–407.
  • Santos, L. H. O., Alexandre, F. S., Mendonza, Z. M. S. H., Souza, E. C., Borges, P. H. M., Mariano, R. R., Ruiz Diaz, L. M. G. and Nunes, C. A. (2020) Características químicas e físicas da madeira de mogno africano (Khaya ivorensis A. Chev.). Nativa, 8(3), 361–366.
  • Sargent, R. (2019) Evaluating dimensional stability in solid wood: A review of current practice. Journal of Wood Science, 65, 36.
  • Schneeweiß, G. and Felber, S. (2013) Review on the bending strength of wood and influencing factors. American Journal of Materials Science, 3(3), 41–54.
  • Sheng, J., Chen, J., Liu, C., Yang, Z., Yang, Y. and Lin, J. (2020) Changes in the chemical composition of young Chinese fir wood exposed to different soil temperature and water content. Cellulose, 27, 4067–4077.
  • Silva, J. G. M., Vidaurre, G. B., Arantes, M. D. C., Batista, D. C., Soranso, D. R. and Billo, D. F. (2016) Qualidade da Madeira de mogno africano para a produção de serrado. Scientia Forestalis, 44(109), 181–190.
  • Silva, C. B. R., Santos Junior, J. A., Araújo, A. J. C., Sales, A., Siviero, M. A., Andrade, F. W. C., Castro, J. P., Latorraca, J. V. F. and Melo, L. E. L. (2020) Properties of juvenile wood of Schizolobium parahyba var. amazonicum (paricá) under different cropping systems. Agroforestry Systems, 94, 583–595.
  • Soranso, D. R., Vidaurre, G. B., Chagas, M. T., Oliveira, J. T. S., Silva, J. G. M. and Latorraca, J. V. F. (2018) Radial growth dynamics of Khaya ivorensis trees from experimental plantation. Revista Árvore, 42(2), e420207.
  • Sosanwo, O. A., Fawcett, A. H. and Apperley, D. (1995) 13C CP–MAS NMR spectra of tropical hardwoods. Polymer International, 36(3), 247–259.
  • Taylor, A. M., Baek, S. H., Jeong, M. K. and Nix, G. (2008) Wood shrinkage prediction using NIR spectroscopy. Wood Science and Technology, 40(2), 301–307.
  • Tekpetey, S. L., Essien, C., Appiah-Kubi, E., Opuni-Frimpong, E. and Korang, J. (2016) Evaluation of the chemical composition and natural durability of natural and plantation grown African Mahogany Khaya ivorensis A. Chiev in Ghana. Journal of the Indian Academy of Wood Science, 13(2), 152–155.
  • Thomas, D., Henson, M., Joe, B., Boyton, S. and Dickson, R. (2009) Review of growth and wood quality of plantation-grown Eucalyptus dunnii Maiden. Australian Forestry, 72(1), 3–11.
  • Viani, R. A., Morais, J. P. G., Domene, F., Eugênio, E. R., Campana, M., Neto, E. L. and Oliveira, A. C. C. (2020) Bark-stripping of African mahogany trees (Khaya spp.) by cattle in silvipastoral systems in Brazil. Agroforestry Systems, 94, 2385–2390.
  • Vidaurre, G. B., Silva, J. G. M., Castro, M., Coelho, J. C. F., Brito, A. S. and Moulin, J. C. (2017) Relação da grã com algumas variáveis do crescimento e propriedades da madeira de Khaya ivorensis. Scientia Forestalis, 45(114), 249–259.
  • Xue, Q., Sun, W., Fagerstedt, K., Guo, X., Dong, M., Wang, W. and Cao, H. (2018) Effects of wood rays on the shrinkage of wood during the drying process. BioResources, 13(3), 7086–7095.
  • You, R., Zhu, N., Deng, X., Wang, J. and Liu, F. (2021) Variation in wood physical properties and effects of climate for different geographic sources of Chinese fir in subtropical area of China. Scientific Reports, 11, 4664.
  • Zborowska, M., Stachowiak-Wence, A., Waliszewska, B. and Rądzyński, W. (2016) Colorimetric and FTIR ATR spectroscopy studies of degradative effects of ultraviolet light on the surface of exotic ipe (Tabebuia sp.) wood. Cellulose Chemistry and Technology, 50(1), 71–76.
  • Zobel, B. J. and Buijtenen, J. P. (2012) The properties of juvenile wood. In T. E. Timell (ed.), Wood Variation: Its Causes and Control (Heidelberg: Springer), pp. 90–93.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.