The European Yield Model (EYM) for laterally loaded timber connections with smooth nails

References

• Blass, H. J., Bienhaus, A. and Kramer, V. (2001) Effective bending capacity of dowel-type fastener. Proc. International RILEM Symposium on Joints in Timber Structures, 71–80.
   Google Scholar
• CSA 086-09 (2009) Engineering design in wood. Canadian Standards Association.
   Google Scholar
• DIN 1052 T2 (1988) Holzbauwerke; Mechanische Verbindungen. European Committee for Standardisation, Brussels, Belgium.
   Google Scholar
• Ehlbeck, J. (1976) Versuche mit Sondernägeln für den Holzbau. Holz als Roh-und Werkstoff, 34, 205–211.
   Google Scholar
• EN 13183-1:2002. Moisture content of a piece of sawn timber. Part 1: Determination by oven dry method. European Committee for Standardisation, Brussels, Belgium.
   Google Scholar
• EN 1382:2016. Timber structures – Test methods – Withdrawal capacity of timber fasteners. European Committee for Standardisation, Brussels, Belgium.
   Google Scholar
• EN 14358:2016. Timber structures – Calculation and verification of characteristic values. European Committee for Standardisation, Brussels, Belgium.
   Google Scholar
• EN 1995-1-1:2004. Eurocode 5: Design of timber structures - Part 1-1: General - Common rules and rules for buildings. EN 1995-1-1:2004+AC:2006+A1:2008. European Committee for Standardisation, Brussels, Belgium.
   Google Scholar
• EN 26891:1991. Timber structures; Joints made with mechanical fasteners; General principles for the determination of strength and deformation characteristics. European Committee for Standardisation, Brussels, Belgium.
   Google Scholar
• EN 338:2016. Structural Timber – Strength Classes. European Committee for Standardisation, Brussels, Belgium.
   Google Scholar
• EN 383:2007. Timber Structures – Test methods – Determination of embedment strength and foundation values for dowel type fasteners. European Committee for Standardisation, Brussels, Belgium.
   Google Scholar
• EN 384:2016. Structural timber – Determination of characteristic values of mechanical properties and density. European Committee for Standardisation, Brussels, Belgium.
   Google Scholar
• EN 409:2009. Timber structures – Test methods – Determination of the yield moment of dowel type fasteners. European Committee for Standardisation, Brussels, Belgium.
   Google Scholar
• EN 12369-1:2001. Wood-based panels — Characteristic values for structural design — Part 1: OSB, particleboards and fibreboards. European Committee for Standardisation, Brussels, Belgium.
   Google Scholar
• Franke, S. and Magnière, N. (2014) Discussion of testing and evaluation methods for the embedment behaviour of connections. Proceedings of the International Network on Timber Engineering Research. INTER/47-7-1, Bath, UK.
   Google Scholar
• Gečys, T., Bader, T. K., Olsson, A. and Kajėnas, S. (2019) Influence of the rope effect on the slip curve of laterally loaded, nailed and screwed timber-to-timber connections. Construction and Building Materials, 228, 116702.
   Web of Science ®Google Scholar
• Hoppe, M. and Kopp, R. (1991) Eigenspannungen in gezogenen und gerichteten Stäben und Drähten. Draht, 42(12), 885–894.
   Google Scholar
• Hübner, U. (2014) Mechanische Kenngrößen von Buchen-, Eschen-und Robinienholz für lastabtragende Bauteile. Verlag d. Technischen Universität Graz.
   Google Scholar
• Izzi, M. and Polastri, A. (2019) Low cycle ductile performance of screws used in timber structures. Construction and Building Materials, 217, 416–426.
   Web of Science ®Google Scholar
• JCSS, J. (2006) Probabilistic model code. Joint Committee on Structural Safety.
   Google Scholar
• Johansen, K. W. (1949) Theory of timber connections. Int Assoc Bridge Struct Eng, 9, 249–262.
   Google Scholar
• Jorissen, A. and Fragiacomo, M. (2011) General notes on ductility in timber structures. Engineering Structures, 33(11), 2987–2997.
   Web of Science ®Google Scholar
• Kessel, M. (1998) Vergleichende Betrachtungen europäischer Bauproduktnormen mit nationalen Bestimmungen: Teilprojekt: Bestimmung der Lochleibungsfestigkeit nach EN 383 für verschieden Beplankungsmaterialien. Fraunhofer-IRB-Verlag.
   Google Scholar
• Leijten, A., Köhler, J. and Jorissen, A. (2004) Review of probability data for timber connections with dowel-type fasteners. In: Proc. of the CIB-W18 Meeting 37, Edinburgh, UK, Paper No. CIB-W18/37-7-13.
   Google Scholar
• Niemz, P. and Sonderegger, W. (2009) Untersuchungen zum Sorptionsverhalten von Holzwerkstoffen. Bauphysik, 31(4), 244–249.
   Google Scholar
• NZS 3603 (1993) Code of Practice for Timber Design. New Zealand Standard.
   Google Scholar
• Sandhaas, C. and Görlacher, R. (2018) Analysis of nail properties for joint design. Engineering Structures, 173, 231–240.
   Web of Science ®Google Scholar
• Schick, M. and Seim, W. (2019) Overstrength values for light frame timber wall elements based on reliability methods. Engineering Structures, 185, 230–242.
   Web of Science ®Google Scholar
• Seim, W. and Schick, M. (2018) Overstrength assessment for timber connections and wall elements –comparison of different approaches. In Proceedings of World Conference on Timber Engineering.
   Google Scholar
• SIA 265 (2012) Timber structures. Schweizerischer Ingenieur- und Architektenverein.
   Google Scholar
• SIA 265/1 (2009) Timber structures – Supplementary Specifications. Schweizerischer Ingenieur- und Architektenverein.
   Google Scholar
• Steidl, C. M., Wang, S., Bennett, R. M. and Winistorfer, P. M. (2003) Tensile and compression properties through the thickness of oriented strandboard. Forest Products Journal, 53(6), 72–80.
   Web of Science ®Google Scholar
• Steiger, R., Fink, G., Nerbano, S., Hack, E. and Beyer, K. (2018) Experimental investigation of friction stresses between adjacent panels made of Oriented Strand Board (OSB) and between OSB panels and glued laminated timber (GLT) frame members. Materials and Structures, 51(1), doi:10.1617/s11527-017-1124-5
   Web of Science ®Google Scholar
• Svensson, S. and Munch-Andersen, J. (2018) Theory of timber connections with slender dowel type fasteners. Wood Material Science & Engineering, 13(1), 7–15. doi:10.1080/17480272.2016.1226382
   Web of Science ®Google Scholar
• Werner, H. and Siebert, W. (1991) Neue Untersuchungen mit Nägeln für den Holzbau. Holz als Roh-und Werkstoff, 49(5), 191–198.
   Google Scholar
• Whale, L. R. J., Smith, I. and Hilson, B. O. (1989) Characteristic properties of nailed and bolted joints under short-term lateral load, part 4–the influence of testing mode and fastener diameter upon embedment test data. Journal of the Institute of Wood Science, 11(5), 156–161.
   Google Scholar
• Zimmer, K. and Lißner, K. (1992) Berechnung von Verbindungsmitteln im Vergleich zum internationalen Stand. Holz als Roh-und Werkstoff, 50(1), 53–56.
   Google Scholar