292
Views
4
CrossRef citations to date
0
Altmetric
Original Articles

Experimental and numerical assessment of the orthotropic imbibition dynamics of wood

, , , , , ORCID Icon & show all
Pages 607-617 | Received 27 Dec 2021, Accepted 22 Mar 2022, Published online: 07 Apr 2022

References

  • Almeida, G., Gagné, S. and Hernández, R. E. (2006) A NMR study of water distribution in hardwoods at several equilibrium moisture contents. Wood Science and Technology, 41(4), 293–307.
  • Almeida, G., Leclerc, S. and Perre, P. (2008) NMR imaging of fluid pathways during drainage of softwood in a pressure membrane chamber. International Journal of Multiphase Flow, 34(3), 312–321.
  • Bai, F., Sun, Y., Liu, Y. and Guo, M. (2017) Evaluation of the porous structure of Huadian oil shale during pyrolysis using multiple approaches. Fuel, 187, 1–8.
  • Bucki, M. and Perré, P. (2003) Physical Formulation and Numerical Modeling of High Frequency Heating of Wood. Drying Technology, 21(7), 1151–1172.
  • Cai, J., Jin, T., Kou, J., Zou, S., Xiao, J. and Meng, Q. (2021) Lucas-Washburn equation-based modeling of capillary-driven flow in porous systems. Langmuir, 37(5), 1623–1636.
  • Cao, M., Zhang, X., Ren, W., Zhu, J., Wang, H., Xu, H. and Yu, Y. (2021) Effect of drying methods on the cell wall pore structure of Phyllostachys edulis. Journal of Forestry Engineering, 6(6), 202103014.
  • Cave, I. D. (1978) Modelling moisture-related mechanical properties of wood part I: properties of the wood constituents. Wood Science and Technology, 12(1), 75–86.
  • Chen, C., Wang, Y., Wu, Q., Wan, Z., Li, D. and Jin, Y. (2020) Highly strong and flexible composite hydrogel reinforced by aligned wood cellulose skeleton via alkali treatment for muscle-like sensors. Chemical Engineering Journal, 400, 125876.
  • Chen, C., Wang, Y., Zhou, T., Wan, Z., Yang, Q., Xu, Z., Li, D. and Jin, Y. (2021) Toward strong and tough wood-based hydrogels for sensors. Biomacromolecules, 22(12), 5204–5213.
  • Chen, F., Gong, A. S., Zhu, M., Chen, G., Lacey, S. D., Jiang, F., Li, Y., Wang, Y., Dai, J., Yao, Y., Song, J., Liu, B., Fu, K., Das, S. and Hu, L. (2017) Mesoporous, three-dimensional wood membrane decorated with nanoparticles for highly efficient water treatment. ACS Nano, 11(4), 4275–4282.
  • Chen, M., Coasne, B., Guyer, R., Derome, D. and Carmeliet, J. (2018) Role of hydrogen bonding in hysteresis observed in sorption-induced swelling of soft nanoporous polymers. Nature Communications, 9(1), 3507.
  • Chen, Y., Yang, Y., Xiong, Y., Zhang, L., Xu, W., Duan, G., Mei, C., Jiang, S., Rui, Z. and Zhang, K. (2021) Porous aerogel and sponge composites: Assisted by novel nanomaterials for electromagnetic interference shielding. Nano Today, 38, 101204.
  • Côté, W. A. (1981) Ultrastructure—critical domain for wood behavior. Wood Science and Technology, 15(1), 1–29.
  • Cown, D. J. and Clement, B. (1983) A wood densitometer using direct scanning with X-rays. Wood Science and Technology, 17(2), 91–99.
  • Cox, J., McDonald, P. J. and Gardiner, B. A. (2010) A study of water exchange in wood by means of 2D NMR relaxation correlation and exchange. Holzforschung, 64(2), 259–266.
  • Desmarais, G., Gilani, M. S., Vontobel, P., Carmeliet, J. and Derome, D. (2016) Transport of polar and nonpolar liquids in softwood imaged by neutron radiography. Transport in Porous Media, 113(2), 383–404.
  • Dubois, F., Chazal, C. and Petit, C. (2002) Viscoelastic crack growth process in wood timbers: An approach by the finite element method for mode I fracture. International Journal of Fracture, 113(4), 367–388.
  • Eberhardt, T. L. and Samuelson, L. J. (2015) Collection of wood quality data by X-ray densitometry: A case study with three southern pines. Wood Science and Technology, 49(4), 739–753.
  • Eitelberger, J. and Hofstetter, K. (2010) Multiscale homogenization of wood transport properties: Diffusion coefficients for steady-state moisture transport. Wood Material Science and Engineering, 5(2), 97–103.
  • El Hachem, C., Abahri, K., Leclerc, S. and Bennacer, R. (2020) NMR and XRD quantification of bound and free water interaction of spruce wood fibers. Construction and Building Materials, 260, 120470.
  • Engelund, E. T., Thygesen, L. G., Svensson, S. and Hill, C. A. S. (2012) A critical discussion of the physics of wood–water interactions. Wood Science and Technology, 47(1), 141–161.
  • Florisson, S., Vessby, J., Mmari, W. and Ormarsson, S. (2020) Three-dimensional orthotropic nonlinear transient moisture simulation for wood: Analysis on the effect of scanning curves and nonlinearity. Wood Science and Technology, 54(5), 1197–1222.
  • Fredriksson, M. and Thybring, E. E. (2019) On sorption hysteresis in wood: Separating hysteresis in cell wall water and capillary water in the full moisture range. PLoS One, 14(11), e0225111.
  • Gao, L., Yang, Z. and Shi, Y. (2018) Experimental study on spontaneous imbibition chatacteristics of tight rocks. Advances in Geo-Energy Research, 2(3), 292–304.
  • Hacke, U. G. and Jansen, S. (2009) Embolism resistance of three boreal conifer species varies with pit structure. New Phytologist, 182(3), 675–686.
  • Hackspiel, C., de Borst, K. and Lukacevic, M. (2014) A numerical simulation tool for wood grading model development. Wood Science and Technology, 48(3), 633–649.
  • Hall, L. D. and Rajanayagam, V. (1986) Evaluation of the distribution of water in wood by use of three dimensional proton NMR volume imaging. Wood Science and Technology, 20(4), 329–333.
  • Hozjan, T. and Svensson, S. (2011) Theoretical analysis of moisture transport in wood as an open porous hygroscopic material. Holzforschung, 65(1), 97–102.
  • Islam, M. N., Khan, M. A., Alam, M. K., Zaman, M. A. and Matsubayashi, M. (2003) Study of water absorption behavior in wood plastic composites by using neutron radiography techniques. Polymer-Plastics Technology and Engineering, 42(5), 925–934.
  • Jacquin, P., Longuetaud, F., Leban, J.-M. and Mothe, F. (2017) X-ray microdensitometry of wood: A review of existing principles and devices. Dendrochronologia, 42, 42–50.
  • Javed, M. A., Kekkonen, P. M., Ahola, S. and Telkki, V.-V. (2015) Magnetic resonance imaging study of water absorption in thermally modified pine wood. Holzforschung, 69(7), 899–907.
  • Johansson, P., Geving, S., Hagentoft, C.-E., Jelle, B. P., Rognvik, E., Kalagasidis, A. S. and Time, B. (2014) Interior insulation retrofit of a historical brick wall using vacuum insulation panels: Hygrothermal numerical simulations and laboratory investigations. Building and Environment, 79, 31–45.
  • Kang, W. and Chung, W. Y. (2009) Liquid water diffusivity of wood from the capillary pressure-moisture relation. Journal of Wood Science, 55(2), 91–99.
  • Khazaei, J. (2008) Water absorption characteristics of three wood varieties. Cercetări Agronomice în Moldova, 41(2), 134.
  • Khazaei, J. (2008) Water absorption characteristics of three wood varieties. Cercetări Agronomice în Moldova, 41(2), 5–16.
  • Koubaa, A., Zhang, S. Y. T. and Makni, S. (2002) Defining the transition from earlywood to latewood in black spruce based on intra-ring wood density profiles from X-ray densitometry. Annals of Forest Science, 59(5-6), 511–518.
  • Kulasinski, K., Guyer, R., Derome, D. and Carmeliet, J. (2015) Water adsorption in wood microfibril-hemicellulose system: Role of the crystalline-amorphous interface. Biomacromolecules, 16(9), 2972–2978.
  • Li, Y., Lu, Y., Meng, Q., Jensen, A. C. S., Zhang, Q., Zhang, Q., Tong, Y., Qi, Y., Gu, L., Titirici, M. M. and Hu, Y. S. (2019) Regulating pore structure of hierarchical porous waste cork-derived hard carbon anode for enhanced Na storage performance. Advanced Energy Materials, 9, 48.
  • Li, Y., Yu, D. and Niu, B. (2021) Prediction of spontaneous imbibition in fractal porous media based on modified porosity correlation. Capillarity, 4(1), 13–22.
  • Liese, W. and Bauch, J. (1967) On the closure of bordered pits in conifers. Wood Science and Technology, 1(1), 1–13.
  • Lu, X. Y., Li, X. G., Liu, J. M., Lu, X. L., Zhu, H. L. and Zhou, Y. (2015) Numerical simulation of flow fluid in elbow pipe based on FLUENT and the establishment of the pressure model. Applied Mechanics and Materials, 713-715, 39–42.
  • Lykidis, C., Moya, R. and Tenorio, C. (2020) The effect of melamine formaldehyde impregnation and hot-pressing parameters on the density profile of densified poplar wood. European Journal of Wood and Wood Products, 78(3), 433–440.
  • Mackerle, J. (2005) Finite element analyses in wood research: A bibliography. Wood Science and Technology, 39(7), 579–600.
  • Mannes, D., Sanabria, S., Funk, M., Wimmer, R., Kranitz, K. and Niemz, P. (2014) Water vapour diffusion through historically relevant glutin-based wood adhesives with sorption measurements and neutron radiography. Wood Science and Technology, 48(3), 591–609.
  • Mantanis, G. I. and Rowell, R. (1994) Swelling of wood Part 1. Swelling in water. Wood Science and Technology, 28(2), 119–134.
  • Marais, B. N., Brischke, C. and Militz, H. (2020) Wood durability in terrestrial and aquatic environments – A review of biotic and abiotic influence factors. Wood Material Science and Engineering, 17(2), 82–105.
  • Martin, B., Colin, J., Lu, P., Mounkaila, M., Casalinho, J., Perré, P. and Rémond, R. (2021) Monitoring imbibition dynamics at tissue level in Norway spruce using X-ray imaging. Holzforschung, 75(12), 1081–1096.
  • Martin, B., Colin, J., Lu, P., Mounkaila, M., Casalinho, J., Perré, P., Rémond, R. and Kalamees, T. (2020) Water migration in wood during imbibition assessed by X-ray imaging. E3S Web of Conferences, 172, 14007.
  • Menter, F. R., Lechner, R. and Matyushenko, A. (2019) Best practice: Generalized k-ω two-equation turbulence model in ANSYS CFD (GEKO). Technical Report ANSYS, 27.
  • Merela, M., Oven, P., Serša, I. and Mikac, U. (2009) A single point NMR method for an instantaneous determination of the moisture content of wood. Holzforschung, 63(3), 348–351.
  • Monteiro, T. C., Lima, J. T., Silva, J. R. M. d., Rezende, R. N. and Klitzke, R. J. (2020) Water flow in different directions in Corymbia citriodora wood. Maderas. Ciencia y Tecnología, 22(3), 385–394.
  • Nairn, J. A. (2006) Numerical simulations of transverse compression and densification in wood. Wood and Fiber Science, 38(4), 576–591.
  • Nakao, S. and Nakano, T. (2011) Analysis of molecular dynamics of moist wood components by applying the stretched-exponential function. Journal of Materials Science, 46(14), 4748–4755.
  • Pang, X., Yang, X., Li, X., Cao, M. and Yang, X. (2021) Improvement of porosity and dye permeability of moso bamboo splints by alkali etching. Journal of Forestry Engineering, 6(6), 202012030.
  • Perre, P., Nguyen, D. M. and Almeida, G. (2022) A macroscopic Washburn approach of liquid imbibition in wood derived from X-ray tomography observations. Scientific Reports, 12(1), 1–14.
  • Prandtl, L., Oswatitsch, K. and Wieghardt, K. (2013) Führer Durch die Strömungslehre (Braunschweig: Springer-Verlag).
  • Rautkari, L., Hill, C. A. S., Curling, S., Jalaludin, Z. and Ormondroyd, G. (2013) What is the role of the accessibility of wood hydroxyl groups in controlling moisture content? Journal of Materials Science, 48(18), 6352–6356.
  • Redman, A. L., Bailleres, H., Turner, I. and Perré, P. (2016) Characterisation of wood–water relationships and transverse anatomy and their relationship to drying degrade. Wood Science and Technology, 50(4), 739–757.
  • Rodin, V. V. (2019) One- and two-dimensional NMR in studying wood–water interaction at moisturizing spruce. Anisotropy of water self-diffusion. Colloids and Interfaces, 3(3), 54.
  • Roels, S. and Carmeliet, J. (2006) Analysis of moisture flow in porous materials using microfocus X-ray radiography. International Journal of Heat and Mass Transfer, 49(25-26), 4762–4772.
  • Salin, J.-G. (2006) Modelling of the behaviour of free water in sapwood during drying. Wood Material Science and Engineering, 1(1), 4–11.
  • Salin, J.-G. (2008) Drying of liquid water in wood as influenced by the capillary fiber network. Drying Technology, 26(5), 560–567.
  • Sargent, R. (2019) Evaluating dimensional stability in solid wood: A review of current practice. Journal of Wood Science, 65(1), 1–11.
  • Satish, G., Kumar, K. A. and Prasad, V. V. (2013) Comparison of flow analysis of a sudden and gradual change of pipe diameter using fluent software. International Journal of Research in Engineering and Technology, 2(12), 41–45.
  • Sedighi-Gilani, M., Griffa, M., Mannes, D., Lehmann, E., Carmeliet, J. and Derome, D. (2012) Visualization and quantification of liquid water transport in softwood by means of neutron radiography. International Journal of Heat and Mass Transfer, 55(21-22), 6211–6221.
  • Siau, J. F. (2012) Transport Processes in Wood (Berlin: Springer Science and Business Media).
  • Skaar, C. (2012) Wood-Water Relations (Berlin: Springer Science and Business Media).
  • Steppe, K., Cnudde, V., Girard, C., Lemeur, R., Cnudde, J. P. and Jacobs, P. (2004) Use of X-ray computed microtomography for non-invasive determination of wood anatomical characteristics. Journal of Structural Biology, 148(1), 11–21.
  • Sudo, S., Suzuki, Y., Abe, F., Hori, Y., Nishi, T., Kawaguchi, T., Saito, H. and Yagihara, S. (2017) Investigation of the molecular dynamics of restricted water in wood by broadband dielectric measurements. Journal of Materials Science, 53(6), 4645–4654.
  • Tam, L.-h., Zhou, A., Yu, Z., Qiu, Q., Lau, D. (2017) Understanding the effect of temperature on the interfacial behavior of CFRP-wood composite via molecular dynamics simulations. Composites Part B: Engineering, 109, 227–237.
  • Tan, Y., Hu, J., Chang, S., Wei, Y., Liu, G., Wang, Q. and Liu, Y. (2020) Relationship between pore structure and gas permeability in poplar (Populus deltoides CL.’55/65’) tension wood. Annals of Forest Science, 77(3), 1–12.
  • Tanaka, T. and Kawai, Y. (2013) A new method for nondestructive evaluation of solid wood moisture content based on dual-energy X-ray absorptiometry. Wood Science and Technology, 47(6), 1213–1229.
  • Tang, A., Huang, Y., Zhang, W., Yu, Y., Yang, Y., Yuan, Z. and Wang, X. (2021) Effect of the nano-titanium dioxide (nano-TiO2) coating on the photoaging properties of thermally treated bamboo. Wood Material Science and Engineering, 1–10.
  • Time, B. (2002) Studies on hygroscopic moisture transport in Norway spruce (Picea abies) Part 1: Sorption measurements of spruce exposed to cyclic step changes in relative humidity. Holz als Roh- und Werkstoff, 60(4), 271–276.
  • Torres, S. S., Jomaa, W., Puiggali, J.-R. and Avramidis, S. (2011) Multiphysics modeling of vacuum drying of wood. Applied Mathematical Modelling, 35(10), 5006–5016.
  • Tusar, M., Ahmed, K., Bhuiya, M., Bhowmik, P., Rasul, M. and Ashwath, N. (2019) CFD study of heat transfer enhancement and fluid flow characteristics of laminar flow through tube with helical screw tape insert. Energy Procedia, 160, 699–706.
  • Unsal, O. and Candan, Z. (2008) Moisture content, vertical density profile and Janka hardness of thermally compressed pine wood panels as a function of press pressure and temperature. Drying Technology, 26(9), 1165–1169.
  • Unsal, O., Kartal, S. N., Candan, Z., Arango, R. A., Clausen, C. A. and Green, F. (2009) Decay and termite resistance, water absorption and swelling of thermally compressed wood panels. International Biodeterioration and Biodegradation, 63(5), 548–552.
  • Van den Bulcke, J., Masschaele, B., Dierick, M., Acker, J. V., Stevens, M. and Hoorebeke, L. V. (2008) Three-dimensional imaging and analysis of infested coated wood with X-ray submicron CT. International Biodeterioration and Biodegradation, 61(3), 278–286.
  • Vasic, S. and Stanzl-Tschegg, S. (2007) Experimental and numerical investigation of wood fracture mechanisms at different humidity levels. Holzforschung, 61(4), 367–374.
  • Walker, N. K. and Dodd, R. S. (1988) Calculation of wood density variation from x-ray densitometer data. Wood and Fiber Science, 20(1), 35–43.
  • Wang, Y., Sun, G., Dai, J., Chen, G., Morgenstern, J., Wang, Y., Kang, S., Zhu, M., Das, S., Cui, L. and Hu, L. (2017) A high-performance, low-tortuosity wood-carbon monolith reactor. Advanced Materials, 29(2), 1604257.
  • Younsi, R., Kocaefe, D. and Kocaefe, Y. (2006) Three-dimensional simulation of heat and moisture transfer in wood. Applied Thermal Engineering, 26(11-12), 1274–1285.
  • Zhan, T., Lyu, J. and Eder, M. (2021) In situ observation of shrinking and swelling of normal and compression Chinese fir wood at the tissue, cell and cell wall level. Wood Science and Technology, 55(5), 1359–1377.
  • Zhou, M., Caré, S., Courtier-Murias, D., Faure, P., Rodts, S. and Coussot, P. (2018) Magnetic resonance imaging evidences of the impact of water sorption on hardwood capillary imbibition dynamics. Wood Science and Technology, 52(4), 929–955.
  • Zhou, M., Caré, S., King, A., Courtier-Murias, D., Rodts, S., Gerber, G., Aimedieu, P., Bonnet, M., Bornert, M. and Coussot, P. (2019) Wetting enhanced by water adsorption in hygroscopic plantlike materials. Physical Review Research, 1(3), 033190.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.