Mechanical behaviour of poplar laminated veneer lumber with fiber reinforced polymer under shear and compression stresses

References

• Abergel, T., Dean, B. and Dulac, J. (2017) Global Status Report 2017: Towards a zero-emission, efficient, and resilient buildings and construction sector. United Nations Environment Programme, pp.: 48.
   Google Scholar
• Aira, J. R., Descamps, T., Van parys, L. and Léoskool, L. (2015) Study of stress distribution and stress concentration factor in nothced wood piece with cohesive surface. European Journal of Wood and Wood Products, 73, 325–334.
   Web of Science ®Google Scholar
• Bakalarz, M.M., Kossakowski, P.G., Tworzewski, P. (2020) Strengthening of bent LVL beams with Near-Surface Mounted (NSM) FRP reinforcement. Materials, 13, 2350.
   Google Scholar
• Bekir, C. (2014) Flexural properties, bonding performance and splitting strength of LVL reinforced with woben glass fiber. Construction and Building Materials, 51, 9–14.
   Web of Science ®Google Scholar
• Beyer, B., et al. (2019) Frente al Cambio Climático: Utiliza Madera”. CEI-Bois.
   Google Scholar
• Biblis, E. (1965) Analysis of wood-fiberglass composite beams within and beyond the elastic region. Forest Products Journal, 15, 81–88.
   Google Scholar
• Brancheriau, L. and Bailleres, H. (2002) Natural vibration analysis of clear wooden beams: a theoretical review. Wood Science and Technology, 36, 347–365.
   Web of Science ®Google Scholar
• Burdurlu, E., Kilic, M., Ilce, A. C. and Uzunkavak, O. (2007) The effects of ply organization and loading direction on bending strength and modulus of elasticity in laminated veneer lumber (LVL) obtained from beech (fagurs orientalis L.) and lombardy poplar (populus nigra L.). Construction and Building Materials, 21, 1720–1725.
   Web of Science ®Google Scholar
• Cirad (2020) Non-destructive testing of wood. [online] Available from: https://www.picotech.com/library/application-note/non-destructive-testing-of-wood. [Accessed 13 September 2021].
   Google Scholar
• Davalos, J. F., Qiao, P. Z. and Trimble, B. S. (2020) Fiber-reinforced composite and wood bonded interfaces: part 1 durability and shear strength. Journal of Composites Technology and Research, 22(4), 224–231.
   Google Scholar
• Gilfillan, J., Gilbert, S. and Patrick, G. (2003) The use of FRP composites in enhancing the structural behavior of timber beams. Journal of Reinforced Plastics and Composites, 22(15), 1373–1388.
   Web of Science ®Google Scholar
• Gupta, R. and Siller, T. (2005) Comparison of shear strength of structural composite lumber using torsion and shear block tests. Forest Products Journal, 55(12), 29–34.
   Web of Science ®Google Scholar
• H’ng, P. S., Paridah, M. T. and Chin, K. L. (2010) Bending properties of laminated veneer lumber produced from keruing (dipterocarpus sp.) reinforced with low density wood species. Asian Journal of Scientific Research, 3(2), 118–125.
   Google Scholar
• Jelušič, P. and Kravanja, S. (2018) Flexural analysis of laminated solid wood beams with different shear connections. Construction and Building Materials, 174, 456–465.
   Web of Science ®Google Scholar
• Kurt, R., Meric, H., Aslan, K. and Cil, M. (2012) Laminated veneer lumber (LVL) manufacturing using three hybrid poplar clones. Turkish Journal of Agriculture and Forestry, 36(2), 237–245.
   Web of Science ®Google Scholar
• Laufenberg, T. L. (1983) Parallel-laminated veneer: processing and performance research review. Forest Products Journal, 33, 21–28.
   Web of Science ®Google Scholar
• Laufenberg, T. L., Rowlands, R. E. and Krueger, G. P. (1984) Economic feasibility of synthetic fiber reinforced laminated veneer lumber (LVL). Forest Products Journal, 34(4), 15–22.
   Web of Science ®Google Scholar
• Liu, Y. and Lee, A. W. C. (2003) Selected properties of parallel strand lumber made from southern pine and yellow-poplar. Holzforschung, 57, 207–212.
   Web of Science ®Google Scholar
• Mengpin, G., Johannes, F. and Vigna, L. (2020) 4 Charts Explain Greenhouse Gas Emissions by Countries and Sectors [online]. Available from: https://www.wri.org/blog/2020/02/greenhouse-gas-emissions-by-country-sector?utm_source = twitter&utm_medium = ghgprotocol&utm_campaign = socialmedia&utm_term = e03cfd49-08dc-4c1c-851e-c2f12d81f464 [Accesed 13 September 2021].
   Google Scholar
• Raftery, G. M. and Harte, A. M. (2011) Low-grade glued laminated timber reinforced with FRP plate. Composites: Part B, 42, 724–735.
   Web of Science ®Google Scholar
• Rahayu, I., Denaud, L., Marchal, R. and Darmawan, W. (2015) Ten new poplar cultivars provide laminated veneer lumber for structural application. Annals of Forest Science, 72, 705–715.
   Web of Science ®Google Scholar
• Ramage, M. H., Burridge, H., Busse-Wicher, M., Fereday, G., Reynolds, T., Shah, D. U., Wu, G., Yu, L., Fleming, P., Densley-Tingley, D., Allwood, J., Dupree, P., Linden, P. F. and Scherman, O. (2017) The wood from the trees: The use of timber in construction. Renewable & Sustainable Energy Reviews, 68(1), 333–359.
   Google Scholar
• Rescalvo, F. J., Valverde-Palacios, I., Suarez, E. and Gallego, A. (2017) Experimental comparison of different carbon fiber composites in reinforcement layouts for wooden beams of historical buildings. Materials, 10, 1–22, ID 1113.
   Web of Science ®Google Scholar
• Rescalvo, F. J., Valverde-Palacios, I., Suarez, E. and Gallego, A. (2018a) Experimental and analytical analysis for bending load capacity of old timber beams with defects when reinforced with carbon fiber strips. Composite Structures, 186, 29–38.
   Web of Science ®Google Scholar
• Rescalvo, F. J., Aguilar-Aguilera, A., Suarez, E., Valverde-Palacios, I. and Gallego, A. (2018b) Acoustic emission during wood-CFRP adhesión tests. International Journal of Adhesion and Adhesives, 87, 79–90.
   Web of Science ®Google Scholar
• Rescalvo, F. J., Duriot, R., Pot, G., Gallego, A. and Denaud, L. (2020) Enhancement of bending properties of douglas-fir and poplar laminate veneer lumber (LVL) beams with carbon and basalt fibers reinforcement. Construction and Building Materials, 263, 1–9, 120185.
   Web of Science ®Google Scholar
• Rohumaa, A., Hunt, C. G., Hugues, M., Frihart, C. R. and Logren, J. (2013) The influence of lathe check depth and orientation on the bond quality of phenol-formaldehyde-bonded birch plywood. Holzforschung, 67(7), 779–786.
   Web of Science ®Google Scholar
• Solarov, R. and Glišić, M. (2014) Glulam beams reinforced with frp strips and their application in architecture. Spatium, 1-6.
   Google Scholar
• Strickler, M. D. and Pellerin, R. F. (1971) Tension proof loading of finger joint for laminated beams. Forest Products Journal, 21(2), 10–15.
   Google Scholar
• UNE-EN 314-1 (2007) Plywood - Bonding Quality. Part 1: Test Methods (Madrid, Spain: UNE).
   Google Scholar
• UNE-EN 408:2011 + A1:2012 (2012) Timber Structures – Structural Timber and Glued Laminated Timber – Determination of Some Physical and Mechanical Properties (Madrid, Spain: UNE).
   Google Scholar
• Viguier, J., Bourgeay, C., Rohumaa, A., Pot, G. and Denaud, L. (2018) An innovative method based on grain angle measurement to sort veneer and predict mechanical properties of beech laminated veneer lumber. Construction and Building Materials, 181, 146–155.
   Web of Science ®Google Scholar
• Villar-García, J. R., Vidal-López, P., Crespo, J. and Guaita, M. (2019) Analysis of the stress rate at the double-step jount in heavy timber structures. Materiales de Construcción, 69(135), 1–16.
   Google Scholar
• Wei, P., Wang, B. J., Zhou, D., Dai, C., Wang, Q. and Huang, S. (2013) Mechanical properties of poplar laminated veneer lumber modified by carbon fiber reinforced polymer. Bioresources, 8(4), 4883–4898.
   Web of Science ®Google Scholar
• Yeh, B. and Williamson, T. G. (2002) Full-scale edgwise shear tests for Laminated Veneer Lumber. International Council for research and innovation in building and construction-Working comission W18 – Timber structures. 35 meeting, Kyoto, Japan.
   Google Scholar
• Yoshihara, H., Kubojima, Y., Nagaoka, K. and Ohta, M. (1998) Measurement of the shear modulus of wood by static bending tests. Journal of Wood Science, 44, 15–20.
   Web of Science ®Google Scholar