Climate impact on reinforcements in wooden members – effective hygro-expansion coefficients

References

• Aicher, S. and Dill-Langer, G. (1997) Climate induced stresses perpendicular to the grain in glulam. Otto-Graf Journal, 8, 209–231.
   Google Scholar
• Blaß, H. J. (2017) Selbstbohrende Schrauben und Systemverbinder - Stand der Technik und Herausforderungen, 23. Internationales Holzbau-Forum (Garmisch-Partenkirchen).
   Google Scholar
• Blaß, H. J., Bejtka, I. and Uibel, T. (2006) Tragfähigkeit von Verbindungen mit selbstbohrenden Holzschrauben mit Vollgewinde, Universitätsverlag Karlsruhe.
   Google Scholar
• Blaß, H. J., Ehlbeck, J., Kreuzinger, H. and Steck, G. (2004) Erläuterungen zur DIN 1052:2004-08, DGfH. München.
   Google Scholar
• Danielsson, H. (2013) Perpendicular to grain fracture analysis of wooded structural elements - models and applications, Doctoral Thesis, Lund University, Sweden, ISBN: 978-91-7473-475-1.
   Google Scholar
• Danzer, M., Dietsch, P. and Winter, S. (2020) Shrinkage behaviour of reinforces glulam members. Inter Conference proceedings. Karlsruhe.
   Google Scholar
• Danzer, M., Dietsch, P. and Winter, S. (2022) Effect of shrinkage on cracking and structural behaviour of reinforced glulam members. Construction and Building Materials, 327, 125977.
   Web of Science ®Google Scholar
• Dietsch, P. (2012) Einsatz und Berechnung von Schubverstärkungen für Brettschichtholzbauteile. Thesis (PhD). Technische Universität München.
   Google Scholar
• Dietsch, P. (2016) Reinforcement of timber structures – A new section for Eurocode 5, World Conference on Timber Engineering, Vienna.
   Google Scholar
• Dietsch, P. (2017) Effect of reinforcement on shrinkage stresses in timber members. Construction and Building Materials, 150, 903–915.
   Web of Science ®Google Scholar
• Dietsch, P. and Brandner, R. (2015) Self-tapping screws and threaded rods as reinforcement for structural timber elements – A state-of-the-art report. Construction and Building Materials, 97, 78–89.
   Web of Science ®Google Scholar
• Dietsch, P. and Winter, S. (2018) Structural failure in large-span timber structures: A comprehensive analysis of 230 cases. Structural Safety, 71, 41–46.
   Web of Science ®Google Scholar
• EN 1995-1-1 (2004) Eurocode 5. Design of Timber Structures – Part 1-1: General – Common Rules and Rules for Buildings. Brussels: European Committee for Standardization.
   Google Scholar
• Forsén, H. and Tarvainen, V. (2000) Accuracy and Functionality of Hand-held Wood Moisture Content Meters, VTT Publications 420 (Espoo, Finland: Technical Research Centre of Finland).
   Google Scholar
• Franke, B., Franke, S., Schiere, M. and Müller, A. (2019) Quality assurance of timber structures. Research report, Bern University of Applied Sciences, Switzerland, ISBN 978-3-906878-04-1.
   Google Scholar
• Franke, S., Franke, B. and Harte, A. M. (2015) Failure modes and reinforcement techniques for timber beams – state of the Art. Construction and Building Materials, 97, 2–13.
   Web of Science ®Google Scholar
• Frese, M. and Blaß, H. J. (2011) Statistics of damages to timber structures in Germany. Engineering Structures, 33(11), 2969–2977.
   Web of Science ®Google Scholar
• Gamper, A., Dietsch, P. and Merk, M. (2012) Gebäudeklima – Langzeitmessung zur Bestimmung der Auswirkungen auf Feuchtegradienten in Holzbauteilen. Research Report, Technical University of Munich, Germany, ISBN 978-3-8167-9518-6.
   Google Scholar
• Jönsson, J. and Svensson, S. (2004) A contact free measurement method to measure internal stress states in glulam. Holzforschung, 58, 148–153.
   Web of Science ®Google Scholar
• Jockwer, R. (2014) Structural behaviour of glued laminated timber beams with unreinforced and reinforced notches. Thesis (PhD). ETH-Zurich.
   Google Scholar
• Kopfer, H. (1974) Wassertransport durch Diffusion in Feststoffen (Wiesbaden, Germany: Bauverlag GmbH).
   Google Scholar
• Lauber, B. (2008) Ertüchtigung von Holztragwerken, Beispiele aus der Praxis, Holzbautag. Biel/Bienne, Schweiz.
   Google Scholar
• SIA 265 (2012) Holzbau. Schweizerischer Ingenieur-und Architektenverein, Zürich.
   Google Scholar
• Sjödin, J. (2008) STRENGTH AND MOISTURE ASPECTS OF STEEL-TIMBER DOWEL JOINTS IN GLULAM STRUCTURES - an Experimental and Numerical Study, Thesis (PhD). Växjö University.
   Google Scholar
• Trautz, M. (2017) Das Dehnungs- und Tragverhalten von Brettschichtholz beim Lasteintrag durch Vollgewindeschrauben. Bautechnik, 94(11), 776–789.
   Google Scholar
• Trautz, M. and Koj, C. (2008) Mit Schrauben fügen und bewehren – Langzeitversuche an biegesteifen Rahmenecken im Außenklima. Bautechnik, 91(1), 38–45.
   Google Scholar
• Trautz, M. and Koj, C. (2014) Mit Schrauben bewehren. Bautechnik, 85(3), 190–196.
   Google Scholar
• Wallner, B. (2012) Versuchstechnische Evaluierung feuchteinduzierter Kräfte in Brettschichtholz verursacht durch das Einbringen von Schraubstangen. Thesis (Msc). TU Graz.
   Google Scholar